pilot-link utilities with a flake.nix to build them
Go to file
Ryan Rix c1f935538c enable bluez 2023-05-22 14:30:43 -07:00
bindings Import pilot-link 0.12.5. 2016-04-03 22:28:20 -07:00
darwin Import pilot-link 0.12.5. 2016-04-03 22:28:20 -07:00
doc Import pilot-link 0.12.5. 2016-04-03 22:28:20 -07:00
include Import pilot-link 0.12.5. 2016-04-03 22:28:20 -07:00
libpisock Import pilot-link 0.12.5. 2016-04-03 22:28:20 -07:00
libpisync Import pilot-link 0.12.5. 2016-04-03 22:28:20 -07:00
m4 enable bluez 2023-05-22 14:30:43 -07:00
popt Import pilot-link 0.12.5. 2016-04-03 22:28:20 -07:00
src Import pilot-link 0.12.5. 2016-04-03 22:28:20 -07:00
tests Import pilot-link 0.12.5. 2016-04-03 22:28:20 -07:00
0001-fix-type-definitions-in-linuxusb.c.patch add flake and patches for building 2023-05-22 12:57:53 -07:00
AUTHORS Import pilot-link 0.12.5. 2016-04-03 22:28:20 -07:00
COPYING Import pilot-link 0.12.5. 2016-04-03 22:28:20 -07:00
COPYING.LIB Import pilot-link 0.12.5. 2016-04-03 22:28:20 -07:00
ChangeLog Import pilot-link 0.12.5. 2016-04-03 22:28:20 -07:00
INSTALL Import pilot-link 0.12.5. 2016-04-03 22:28:20 -07:00
Makefile.am Import pilot-link 0.12.5. 2016-04-03 22:28:20 -07:00
Makefile.in Import pilot-link 0.12.5. 2016-04-03 22:28:20 -07:00
NEWS Import pilot-link 0.12.5. 2016-04-03 22:28:20 -07:00
README Import pilot-link 0.12.5. 2016-04-03 22:28:20 -07:00
aclocal.m4 Import pilot-link 0.12.5. 2016-04-03 22:28:20 -07:00
autogen.sh Import pilot-link 0.12.5. 2016-04-03 22:28:20 -07:00
config.guess Import pilot-link 0.12.5. 2016-04-03 22:28:20 -07:00
config.h.in Import pilot-link 0.12.5. 2016-04-03 22:28:20 -07:00
config.sub Import pilot-link 0.12.5. 2016-04-03 22:28:20 -07:00
configure enable bluez 2023-05-22 14:30:43 -07:00
configure.ac Import pilot-link 0.12.5. 2016-04-03 22:28:20 -07:00
depcomp Import pilot-link 0.12.5. 2016-04-03 22:28:20 -07:00
flake.lock add flake and patches for building 2023-05-22 12:57:53 -07:00
flake.nix enable bluez 2023-05-22 14:30:43 -07:00
install-sh Import pilot-link 0.12.5. 2016-04-03 22:28:20 -07:00
libpng14.patch Add libpng14 patch from MacPorts. 2016-04-03 22:44:05 -07:00
ltmain.sh Import pilot-link 0.12.5. 2016-04-03 22:28:20 -07:00
missing Import pilot-link 0.12.5. 2016-04-03 22:28:20 -07:00
pilot-link-pp.pc.in Import pilot-link 0.12.5. 2016-04-03 22:28:20 -07:00
pilot-link.m4 Import pilot-link 0.12.5. 2016-04-03 22:28:20 -07:00
pilot-link.m4.in Import pilot-link 0.12.5. 2016-04-03 22:28:20 -07:00
pilot-link.pc.in Import pilot-link 0.12.5. 2016-04-03 22:28:20 -07:00
ylwrap Import pilot-link 0.12.5. 2016-04-03 22:28:20 -07:00


pilot-link -- Palm Handheld Glue - http://www.pilot-link.org

The code and other related files in this distribution are licensed under the
GNU General Public License or "GPL", and the GNU Lesser Public License, or
"LGPL". See http://www.fsf.org/copyleft/lesser.html for a copy of the LGPL.

We will only accept changes into pilot-link if they comply with the proper
licensing. There are many companies using pilot-link in their core products
and are complying with the license. There are also others companies who don't
believe that adhering to the licensing is that important, and violate the
license instead. Please do not be one of these companies.

This code is under active development. If you would like to contribute to the
project, you can contact me, David A. Desrosiers, via email by sending an
email to desrod@gnu-designs.com.

We can also be reached on Internet Relay Chat, "irc", at irc.pilot-link.org
in the channel #pilot-link. I go by the name "setuid" there, and there are a
dozen or more helpful users and other developers that hang out there on a
regular basis.

From the main pilot-link website, you will find many links to helpful
documents, HOWTOs, complementary projects that use pilot-link, and other
resources to help you get the best use out of your Palm device on your
platform of choice; Linux, BSD or Mac OS X.

	Main website........: http://www.pilot-link.org/
	HOWTO Documents.....: http://howto.pilot-link.org/
	Code documentation..: http://doxygen.pilot-link.org/
	Reporting bugs......: http://bugs.pilot-link.org/
	Mailing lists.......: http://lists.pilot-link.org/

We also have several mailing list that you can join. There are mailing lists
for development-specific talk, general talk, announcements and commits. On
the mailing list webpage, you will have the ability to subscribe and read the
past lists archives and posts from thousands of other users.

The architecture of pilot-link
There are several core parts of pilot-link: 

	the libraries
	pilot-link communicates with Palm handhelds using several methods and
	functions specific to these devices.  In order to facilitate these
	communications, the functions are stored in a library, which other
	applications can link to and gain access to those functions.  J-Pilot
	is one example of an application that does exactly this.

	The core pilot-link libraries are in the 'libpisock' and 'libpisync'
	subdirectories of the project tree.

	The standard library for pilot-link is written in the C language, and
	is very easy to understand and extend if you need to do so.

	the conduits
	In pilot-link, there is also the notion of "conduits", that can be
	used to communicate directly with your Palm handheld.  These
	"conduits" are the actual applications that you run directly. These
	are the "userspace" programs.

	These "conduits" are found in the 'src' subdirectory of the project

	the language bindings

	Along with the powerful libraries and conduits, pilot-link also
	provides the ability to communicate with your Palm handheld using
	your favorite language of choice.  Currently, pilot-link includes
	language "bindings" in Perl, Python, Java, and Tcl.  This means you
	can use those languages, instead of C directly, to talk to your Palm
	handheld device and communicate with it. 

	Want to write a Java application that uses pilot-link's libraries?
	Simple! Just use the Java bindings.

	Want to talk to your Palm device using Perl code? Simply use the Perl

	Our hope is that more bindings will be added in the future, such as
	Ruby or Objective C.

	the tests
	In order to make sure the code in pilot-link does what it should, we
	also include quite a bit of regression tests to check to make sure
	each function we use is operating properly. These tests will check
	each of these functions and report any errors or success as they are

Building the project
	pilot-link is developed primarily on Debian GNU/Linux and FreeBSD. It
	is expected to build cleanly on any POSIX-compliant platform. Some
	users have reported success building it under Cygwin on Windows. It
	will also build cleanly under Apple OSX, if you have the proper
	development environment installed and configured on your machine.
	Each of these will be explained in detail below.

Building pilot-link on Linux/Unix systems
	PLEASE READ THIS CAREFULLY! The worst thing you can do is the
	overly-common misuse of "configure, make, make install" to build and
	install pilot-link.  There are so many customizations you can make to
	pilot-link, that you should almost never build pilot-link without
	options. Please make sure you use the --help option to "./configure"
	to make sure you're enabling all of the options you wish to use.

	If you have downloaded this code from the website, or as a tarball,
	simply unpack the tarball and run "./configure" in the top-level
	directory with your specific arguments. "./configure --help" will
	describe all of them.

	If you want to install in some place other than the default location of
	/usr/local, pass configure an argument such as:

		$ ./configure --prefix=/home/fred/pilot

	If configure ran successfully, you should run 'make' to build the

		$ make
	After the source builds, feel free to play around in the 'src'
	subdirectory, CAREFULLY. 'dlpsh' and 'pilot-xfer' are probably the
	most useful programs for you, and also the safest to use
	Once you have determined that pilot-link works and suits your needs
	by testing with these programs, switch to the super user, typically
	"root", to install the conduits, libraries, docs, and headers
	required for proper operation and development of pilot-link.

		$ su - root

	If you wish to include root's environment when you install (STRONGLY
	recommended), be sure to pass the '-' option when you su to root, as

	AFTER you test that the code works properly, run 'make install' to
	install the code into your specified prefix, or the default of
	/usr/local will be used.

		# make install

	If you are using a CVS version of pilot-link, you will have to run
	'sh ./autogen.sh' instead, from the top-level directory, which will
	create and bootstrap the "./configure" script for you.

	You will also need to have your development environment set up, which
	will require such tools as automake, autoconf, libtool, some system
	headers, and others to be properly installed and configured on your
	machine first. If you are running a current Linux or Unix system,
	these common tools are probably packaged for you.

Building pilot-link on OS/2 
	pilot-link on OS/2 only supports serial devices. USB is unsupported
	at this time. We would like volunteers to help us out porting
	pilot-link to work with USB on that platform. If you are skilled and
	interested in helping, please contact me directly. I can't seem to
	get the OS to run correctly on any hardware I have, so I need some
	help there.

	The steps are fairly straightforward.

	Run the os2configure.cmd script in the top-level directory. 
	Run make -f Makefile.os2
	Play around, CAREFULLY. pilot-xfer is probably the most useful
	program for you, and also the safest of all to use non-destructively.
	Also dlpsh is a good app to use to poke around in your Palm device.
	Run 'make install' if you you have tested thoroughly and are sure
	pilot-link works well for you.
	Note on pilot-debug: This program is a work-in-progress, and requires
	Tcl 7.5 (or greater) and optionally Tk 4.1 (or greater) and/or
	Readline 2.0.  You'll need to modify Makefile to to use Readline 2.0,
	and if your Tcl or Tk aren't in standard places, you'll need to
	wiggle configure or the Makefile.  You must have installed pilot-link
	or else run pilot-debug in the pilot-link source directory if you
	want the fancy images for the Remote UI window.

Building pilot-link on Apple OSX/Darwin
	To build pilot-link on Apple OSX ("Darwin") systems, you will need to
	make sure you have some development tools installed first. These can
	all be found in the "Fink" package repository hosted on SourceForge.


	Download and install the latest Fink from there onto your OSX system.
	These will install into the $PREFIX of /sw on your machine. To gain
	access to the binaries it places in /sw/bin, export the proper
	/sw/bin path to the BEGINNING of your $PATH environment variable. Do
	NOT put it at the end:

	Correct method (for bash)
	export PATH=/sw/bin:$PATH

	Incorrect method (for bash)
	export PATH=$PATH:/sw/bin

	The reason we need it at the beginning, is so that we can make sure
	the GNU tools that Fink uses, are chosen first, and not the OSX tools
	which may carry the same name (libtool is one example).

	Now that you have Fink installed, and the $PATH exported properly,
	execute the following command (as root):

		# fink selfupdate

	This will update your newly-installed Fink to the latest version
	available for download. In many cases, the latest version for
	download may not be the latest version available. 'selfupdate'
	ensures that it is.

	From there, you will need to install some GNU tools. Please install
	the following packages, using the 'fink install <packagename>'


	When these are installed, you can then unpack pilot-link, and run the
	./configure found inside with your custom arguments and parameters.

	REMEMBER: It is almost always incorrect to run ./configure without
	passing it any parameters. Please use './configure --help' first to
	see descriptions of the parameters you will need to use to customize
	pilot-link for your needs.

	After running ./configure, you should then be able to build it with
	the 'make' command. If it builds clean, PLEASE remember to test it
	first. The syntax to test pilot-link on OSX for USB devices is as

		<pilot-link-command> -p usb: [arguments..] 

	One example of this is as follows: 

		pilot-xfer --port usb: --list

	This should list the record and resource databases found on your Palm
	handheld device.

Building pilot-link on Cygwin under Windows
	FIXME: Unsupported at this time, but may run under Cygwin talking to
	COM1 through the Cygwin virtual serial port bridging.

Some usage notes about pilot-link
	read-ical and sync-ical will only run if you have ical-2.x installed
	and in the path.
	sync-plan is a full syncronization program, though it has some
	interesting quirks and requirements. You must running netplan from
	plan-1.6.1 (probably available at
	<http://www.in-berlin.de/User/bitrot>). Future or later versions may
	work, but I cannot gaurantee this. Sync-plan does _not_ check the
	Palm's user name, so be very careful not to sync two Palms to the
	same Plan database. This will not work in a useful manner, at the
	moment.  Sync-plan leaves a file, that has a name starting with
	"pilothash", in the current directory. This file must be present for
	all future syncs between that plan database and that Palm.
	As sync-plan is a work in progress, please contact me with any
	The default connection rate is 9600 baud. You are welcome to try
	higher baud rates (19200, 38400, or 57600) by setting the PILOTRATE
	environment variable, but various machines have various limitations.
	(Be careful about 38400 on a Linux box if you've been using setserial
	to change the multiplier.)
	pilot-mail (which requires a Palm with the new Mail application, as
	well as sendmail and/or a POP3 server) is still in the experimental
	stage.  Run with an argument of '-H' for help. While I don't expect
	it to lose data, (and by default mail is kept on both sides, not
	deleted) I can not and will not guarantee that you won't. Please back
	up your UNIX mailbox and Palm mailbox (via pilot-xfer) before

	If you wish, you may easily change the default settings (pop host,
	password, etc.) for pilot-mail by editing the top of pilot-mail.c, as
	well as by setting the environment variables indicated in its help.
	Scott Grosch's "validate" program is included, and can be made via
	'make validate', but it may not be of use to anyone but Scott.

Debugging notes
	Please see doc/README.debugging for more detailed information
	describing how to debug pilot-link's core protocols and interfaces.
	Debugging pilot-link will allow us to make pilot-link work better on
	new devices and with new applications.

USB Notes
	Please see doc/README.usb for more detailed information on
	configuring your system to use USB-enabled Palm handheld devices
	using the standard Linux "visor" kernel module.

	If you would like to try the new libusb code, please see
	doc/README.libusb for details on how to get that working properly.

FreeBSD Notes
	Please see doc/README.freebsd for more detailed information on
	setting up pilot-link to work with FreeBSD systems. In FreeBSD, you
	may have to set your ACLOCAL_FLAGS="-I /usr/local/share/aclocal/"
	before running autogen.sh.

	To use libusb, install the libusb port first and run configure. You
	will need to set LDFLAGS, CFLAGS and CPPFLAGS to let configure find
	the library, though. Something like this:

		$ ACLOCAL_FLAGS="-I /usr/local/share/aclocal/"
		$ LDFLAGS="-L/usr/local/lib"
		$ CFLAGS="-I/usr/local/include"
		$ CPPFLAGS="-I/usr/local/include"

Embedding information
	As of 0.5.0, the headers in pilot-link have been rearranged slightly
	so that it should be easier and more reliable to use the libpisock.a
	library in external applications.
	If you want to use the pilot-link portability layer (configured via
	autoconf), then include pi-source.h. Otherwise, do not touch this
	file, as it sets up a mildly complex environment.
	For all normal operations, simply include the obvious files (pi-file
	for pdb and .prc file access, pi-dlp for DLP sync functions, etc.). 
	pi-macros contains the portable byte-access routines.

Reporting Bugs
	Any bugs you find with pilot-link can be easily reported in the
	online bug-tracking system found at http://bugs.pilot-link.org. From
	there, any issues reported can be updated, audited, commented on, and
	resolved. You can also attach files and patches any other relevant
	items to each bug report, to help our team solve the issues or add
	the features you report.
		Please check the existing bugs in the system FIRST
		before reporting your bug. There may be an identical
		report from another user that matches your bug. If
		you find one that is similar, please add your notes
		and details to that existing report. Please try to be
		as specific as possible.

	If your bug is unique, and does not appear in the system, please fill
	out a new bug report and remember to be as detailed as possible when
	filling it out. Make sure to include your operating system, version
	of pilot-link, Palm handheld type and the PalmOS version running on
	the device, and any steps required to reproduce the bug.

	With this information, the developers can be well-informed with the
	information they'll need to help try to track down and fix your bug.

License notes
	The utility programs, otherwise known collectively as "conduits"
	(pilot-xfer, dlpsh, sync-plan, etc.) are licensed for use under the
	GPL. For more information, please see the file COPYING included in
	this source tree.

	The libraries (libpisock, libpisync, libpisock++, and libcc) and the
	language bindings (Perl, Python, Java, and Tcl) are licensed for use
	under the LGPL. For more information, please see COPYING.LIB included
	in this source tree.
	All contained source is the copyright of its author(s). Please see
	the copyright notices in the individual files for more information on
	their individual copyrights.

Happy Hacking,
The pilot-link Team
pilot-link was originally written by Kenneth Albanowski <kjahds@kjahds.com>
and others.