12584 lines
298 KiB
C
12584 lines
298 KiB
C
/**
|
|
* Copyright (c) 2017 - 2019, Nordic Semiconductor ASA
|
|
*
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without modification,
|
|
* are permitted provided that the following conditions are met:
|
|
*
|
|
* 1. Redistributions of source code must retain the above copyright notice, this
|
|
* list of conditions and the following disclaimer.
|
|
*
|
|
* 2. Redistributions in binary form, except as embedded into a Nordic
|
|
* Semiconductor ASA integrated circuit in a product or a software update for
|
|
* such product, must reproduce the above copyright notice, this list of
|
|
* conditions and the following disclaimer in the documentation and/or other
|
|
* materials provided with the distribution.
|
|
*
|
|
* 3. Neither the name of Nordic Semiconductor ASA nor the names of its
|
|
* contributors may be used to endorse or promote products derived from this
|
|
* software without specific prior written permission.
|
|
*
|
|
* 4. This software, with or without modification, must only be used with a
|
|
* Nordic Semiconductor ASA integrated circuit.
|
|
*
|
|
* 5. Any software provided in binary form under this license must not be reverse
|
|
* engineered, decompiled, modified and/or disassembled.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY NORDIC SEMICONDUCTOR ASA "AS IS" AND ANY EXPRESS
|
|
* OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
|
* OF MERCHANTABILITY, NONINFRINGEMENT, AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
|
* DISCLAIMED. IN NO EVENT SHALL NORDIC SEMICONDUCTOR ASA OR CONTRIBUTORS BE
|
|
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
|
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE
|
|
* GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
|
|
* OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
*/
|
|
|
|
#ifndef SDK_CONFIG_H
|
|
#define SDK_CONFIG_H
|
|
// <<< Use Configuration Wizard in Context Menu >>>\n
|
|
#ifdef USE_APP_CONFIG
|
|
#include "app_config.h"
|
|
#endif
|
|
// <h> nRF_ANT
|
|
|
|
//==========================================================
|
|
// <e> ANTFS_ENABLED - ant_fs - ANT File Share module.
|
|
//==========================================================
|
|
#ifndef ANTFS_ENABLED
|
|
#define ANTFS_ENABLED 0
|
|
#endif
|
|
// <o> ANTFS_CONFIG_NETWORK_NUMBER - ANT-FS network number.
|
|
#ifndef ANTFS_CONFIG_NETWORK_NUMBER
|
|
#define ANTFS_CONFIG_NETWORK_NUMBER 0
|
|
#endif
|
|
|
|
// <o> ANTFS_CONFIG_CHANNEL_NUMBER - ANT-FS channel number.
|
|
#ifndef ANTFS_CONFIG_CHANNEL_NUMBER
|
|
#define ANTFS_CONFIG_CHANNEL_NUMBER 0
|
|
#endif
|
|
|
|
// <o> ANTFS_CONFIG_PAIRING_TIMEOUT - Pairing timeout - how long the UI will wait for a response to a pairing request before switching to
|
|
// the link layer, in seconds.
|
|
#ifndef ANTFS_CONFIG_PAIRING_TIMEOUT
|
|
#define ANTFS_CONFIG_PAIRING_TIMEOUT 120
|
|
#endif
|
|
|
|
// <o> ANTFS_CONFIG_LINK_COMMAND_TIMEOUT - Command timeout - how long the client will wait without receiving any commands before switching
|
|
// to the link layer, in seconds.
|
|
#ifndef ANTFS_CONFIG_LINK_COMMAND_TIMEOUT
|
|
#define ANTFS_CONFIG_LINK_COMMAND_TIMEOUT 10
|
|
#endif
|
|
|
|
// <o> ANTFS_CONFIG_TRANS_TYPE - ANT-FS Transmission Type.
|
|
#ifndef ANTFS_CONFIG_TRANS_TYPE
|
|
#define ANTFS_CONFIG_TRANS_TYPE 10
|
|
#endif
|
|
|
|
// <o> ANTFS_CONFIG_DEVICE_TYPE - ANT device type for channel configuration.
|
|
#ifndef ANTFS_CONFIG_DEVICE_TYPE
|
|
#define ANTFS_CONFIG_DEVICE_TYPE 1
|
|
#endif
|
|
|
|
// <o> ANTFS_CONFIG_BEACON_STATUS_PERIOD - ANT-FS Beacon Message Period.
|
|
|
|
// <0=> 0.5 Hz
|
|
// <1=> 1 Hz
|
|
// <2=> 2 Hz
|
|
// <3=> 4 Hz
|
|
// <4=> 8 Hz
|
|
|
|
#ifndef ANTFS_CONFIG_BEACON_STATUS_PERIOD
|
|
#define ANTFS_CONFIG_BEACON_STATUS_PERIOD 3
|
|
#endif
|
|
|
|
// <o> ANTFS_CONFIG_TRANSMIT_POWER - ANT Transmit Power.
|
|
|
|
// <0=> Lowest ANT Tx power level setting. (-20dBm)
|
|
// <1=> ANT Tx power > Lvl 0. (-12dBm)
|
|
// <2=> ANT Tx power > Lvl 1. (-4dBm)
|
|
// <3=> ANT Tx power > Lvl 2. Default tx power level. (0dBm)
|
|
// <4=> ANT Tx power > Lvl 3. (+4dBm)
|
|
// <128=> Custom tx power selection
|
|
|
|
#ifndef ANTFS_CONFIG_TRANSMIT_POWER
|
|
#define ANTFS_CONFIG_TRANSMIT_POWER 3
|
|
#endif
|
|
|
|
// <o> ANTFS_CONFIG_CUSTOM_TRANSMIT_POWER - ANT Custom Transmit Power.
|
|
#ifndef ANTFS_CONFIG_CUSTOM_TRANSMIT_POWER
|
|
#define ANTFS_CONFIG_CUSTOM_TRANSMIT_POWER 0
|
|
#endif
|
|
|
|
// <q> ANTFS_CONFIG_AUTH_TYPE_PAIRING_ENABLED - Use pairing and key exchange authentication.
|
|
|
|
#ifndef ANTFS_CONFIG_AUTH_TYPE_PAIRING_ENABLED
|
|
#define ANTFS_CONFIG_AUTH_TYPE_PAIRING_ENABLED 0
|
|
#endif
|
|
|
|
// <q> ANTFS_CONFIG_AUTH_TYPE_PASSKEY_ENABLED - Use passkey authentication.
|
|
|
|
#ifndef ANTFS_CONFIG_AUTH_TYPE_PASSKEY_ENABLED
|
|
#define ANTFS_CONFIG_AUTH_TYPE_PASSKEY_ENABLED 0
|
|
#endif
|
|
|
|
// <q> ANTFS_CONFIG_AUTH_TYPE_PASSTHROUGH_ENABLED - Allow host to bypass authentication.
|
|
|
|
#ifndef ANTFS_CONFIG_AUTH_TYPE_PASSTHROUGH_ENABLED
|
|
#define ANTFS_CONFIG_AUTH_TYPE_PASSTHROUGH_ENABLED 0
|
|
#endif
|
|
|
|
// <q> ANTFS_CONFIG_UPLOAD_ENABLED - Support upload operation.
|
|
|
|
#ifndef ANTFS_CONFIG_UPLOAD_ENABLED
|
|
#define ANTFS_CONFIG_UPLOAD_ENABLED 0
|
|
#endif
|
|
|
|
// <q> ANTFS_CONFIG_DEBUG_LED_ENABLED - Enables LED debug in the module.
|
|
|
|
#ifndef ANTFS_CONFIG_DEBUG_LED_ENABLED
|
|
#define ANTFS_CONFIG_DEBUG_LED_ENABLED 0
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// <e> ANT_BPWR_ENABLED - ant_bpwr - Bicycle Power Profile
|
|
//==========================================================
|
|
#ifndef ANT_BPWR_ENABLED
|
|
#define ANT_BPWR_ENABLED 0
|
|
#endif
|
|
// <e> ANT_BPWR_LOG_ENABLED - Enables general logging in the module.
|
|
//==========================================================
|
|
#ifndef ANT_BPWR_LOG_ENABLED
|
|
#define ANT_BPWR_LOG_ENABLED 0
|
|
#endif
|
|
// <o> ANT_BPWR_LOG_LEVEL - Default Severity level
|
|
|
|
// <0=> Off
|
|
// <1=> Error
|
|
// <2=> Warning
|
|
// <3=> Info
|
|
// <4=> Debug
|
|
|
|
#ifndef ANT_BPWR_LOG_LEVEL
|
|
#define ANT_BPWR_LOG_LEVEL 3
|
|
#endif
|
|
|
|
// <o> ANT_BPWR_INFO_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef ANT_BPWR_INFO_COLOR
|
|
#define ANT_BPWR_INFO_COLOR 0
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// <e> ANT_BPWR_COMMON_LOG_ENABLED - Enables logging of BPWR tracing common data.
|
|
//==========================================================
|
|
#ifndef ANT_BPWR_COMMON_LOG_ENABLED
|
|
#define ANT_BPWR_COMMON_LOG_ENABLED 0
|
|
#endif
|
|
// <o> ANT_BPWR_COMMON_LOG_LEVEL - Default Severity level
|
|
|
|
// <0=> Off
|
|
// <1=> Error
|
|
// <2=> Warning
|
|
// <3=> Info
|
|
// <4=> Debug
|
|
|
|
#ifndef ANT_BPWR_COMMON_LOG_LEVEL
|
|
#define ANT_BPWR_COMMON_LOG_LEVEL 3
|
|
#endif
|
|
|
|
// <o> ANT_BPWR_COMMON_INFO_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef ANT_BPWR_COMMON_INFO_COLOR
|
|
#define ANT_BPWR_COMMON_INFO_COLOR 0
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// <e> ANT_BPWR_PAGE_TORQUE_LOG_ENABLED - Enables logging of BPWR torque page in the module.
|
|
//==========================================================
|
|
#ifndef ANT_BPWR_PAGE_TORQUE_LOG_ENABLED
|
|
#define ANT_BPWR_PAGE_TORQUE_LOG_ENABLED 0
|
|
#endif
|
|
// <o> ANT_BPWR_PAGE_TORQUE_LOG_LEVEL - Default Severity level
|
|
|
|
// <0=> Off
|
|
// <1=> Error
|
|
// <2=> Warning
|
|
// <3=> Info
|
|
// <4=> Debug
|
|
|
|
#ifndef ANT_BPWR_PAGE_TORQUE_LOG_LEVEL
|
|
#define ANT_BPWR_PAGE_TORQUE_LOG_LEVEL 3
|
|
#endif
|
|
|
|
// <o> ANT_BPWR_PAGE_TORQUE_INFO_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef ANT_BPWR_PAGE_TORQUE_INFO_COLOR
|
|
#define ANT_BPWR_PAGE_TORQUE_INFO_COLOR 0
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// <e> ANT_BPWR_PAGE_1_LOG_ENABLED - Enables logging of BPWR page 1 in the module.
|
|
//==========================================================
|
|
#ifndef ANT_BPWR_PAGE_1_LOG_ENABLED
|
|
#define ANT_BPWR_PAGE_1_LOG_ENABLED 0
|
|
#endif
|
|
// <o> ANT_BPWR_PAGE_1_LOG_LEVEL - Default Severity level
|
|
|
|
// <0=> Off
|
|
// <1=> Error
|
|
// <2=> Warning
|
|
// <3=> Info
|
|
// <4=> Debug
|
|
|
|
#ifndef ANT_BPWR_PAGE_1_LOG_LEVEL
|
|
#define ANT_BPWR_PAGE_1_LOG_LEVEL 3
|
|
#endif
|
|
|
|
// <o> ANT_BPWR_PAGE_1_INFO_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef ANT_BPWR_PAGE_1_INFO_COLOR
|
|
#define ANT_BPWR_PAGE_1_INFO_COLOR 0
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// <e> ANT_BPWR_PAGE_16_LOG_ENABLED - Enables logging of BPWR page 16 in the module.
|
|
//==========================================================
|
|
#ifndef ANT_BPWR_PAGE_16_LOG_ENABLED
|
|
#define ANT_BPWR_PAGE_16_LOG_ENABLED 0
|
|
#endif
|
|
// <o> ANT_BPWR_PAGE_16_LOG_LEVEL - Default Severity level
|
|
|
|
// <0=> Off
|
|
// <1=> Error
|
|
// <2=> Warning
|
|
// <3=> Info
|
|
// <4=> Debug
|
|
|
|
#ifndef ANT_BPWR_PAGE_16_LOG_LEVEL
|
|
#define ANT_BPWR_PAGE_16_LOG_LEVEL 3
|
|
#endif
|
|
|
|
// <o> ANT_BPWR_PAGE_16_INFO_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef ANT_BPWR_PAGE_16_INFO_COLOR
|
|
#define ANT_BPWR_PAGE_16_INFO_COLOR 0
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// <e> ANT_BPWR_PAGE_17_LOG_ENABLED - Enables logging of BPWR page 17 in the module.
|
|
//==========================================================
|
|
#ifndef ANT_BPWR_PAGE_17_LOG_ENABLED
|
|
#define ANT_BPWR_PAGE_17_LOG_ENABLED 0
|
|
#endif
|
|
// <o> ANT_BPWR_PAGE_17_LOG_LEVEL - Default Severity level
|
|
|
|
// <0=> Off
|
|
// <1=> Error
|
|
// <2=> Warning
|
|
// <3=> Info
|
|
// <4=> Debug
|
|
|
|
#ifndef ANT_BPWR_PAGE_17_LOG_LEVEL
|
|
#define ANT_BPWR_PAGE_17_LOG_LEVEL 3
|
|
#endif
|
|
|
|
// <o> ANT_BPWR_PAGE_17_INFO_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef ANT_BPWR_PAGE_17_INFO_COLOR
|
|
#define ANT_BPWR_PAGE_17_INFO_COLOR 0
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// <e> ANT_BPWR_PAGE_18_LOG_ENABLED - Enables logging of BPWR page 18 in the module.
|
|
//==========================================================
|
|
#ifndef ANT_BPWR_PAGE_18_LOG_ENABLED
|
|
#define ANT_BPWR_PAGE_18_LOG_ENABLED 0
|
|
#endif
|
|
// <o> ANT_BPWR_PAGE_18_LOG_LEVEL - Default Severity level
|
|
|
|
// <0=> Off
|
|
// <1=> Error
|
|
// <2=> Warning
|
|
// <3=> Info
|
|
// <4=> Debug
|
|
|
|
#ifndef ANT_BPWR_PAGE_18_LOG_LEVEL
|
|
#define ANT_BPWR_PAGE_18_LOG_LEVEL 3
|
|
#endif
|
|
|
|
// <o> ANT_BPWR_PAGE_18_INFO_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef ANT_BPWR_PAGE_18_INFO_COLOR
|
|
#define ANT_BPWR_PAGE_18_INFO_COLOR 0
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// </e>
|
|
|
|
// <e> ANT_BSC_ENABLED - ant_bsc - Bicycle Speed and Cadence Profile
|
|
//==========================================================
|
|
#ifndef ANT_BSC_ENABLED
|
|
#define ANT_BSC_ENABLED 0
|
|
#endif
|
|
// <e> ANT_BSC_LOG_ENABLED - Enables general logging in the module.
|
|
//==========================================================
|
|
#ifndef ANT_BSC_LOG_ENABLED
|
|
#define ANT_BSC_LOG_ENABLED 0
|
|
#endif
|
|
// <o> ANT_BSC_LOG_LEVEL - Default Severity level
|
|
|
|
// <0=> Off
|
|
// <1=> Error
|
|
// <2=> Warning
|
|
// <3=> Info
|
|
// <4=> Debug
|
|
|
|
#ifndef ANT_BSC_LOG_LEVEL
|
|
#define ANT_BSC_LOG_LEVEL 3
|
|
#endif
|
|
|
|
// <o> ANT_BSC_INFO_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef ANT_BSC_INFO_COLOR
|
|
#define ANT_BSC_INFO_COLOR 0
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// <e> ANT_BSC_COMBINED_PAGE_0_LOG_ENABLED - Enables logging of BSC Combined page 0 in the module.
|
|
//==========================================================
|
|
#ifndef ANT_BSC_COMBINED_PAGE_0_LOG_ENABLED
|
|
#define ANT_BSC_COMBINED_PAGE_0_LOG_ENABLED 0
|
|
#endif
|
|
// <o> ANT_BSC_COMBINED_PAGE_0_LOG_LEVEL - Default Severity level
|
|
|
|
// <0=> Off
|
|
// <1=> Error
|
|
// <2=> Warning
|
|
// <3=> Info
|
|
// <4=> Debug
|
|
|
|
#ifndef ANT_BSC_COMBINED_PAGE_0_LOG_LEVEL
|
|
#define ANT_BSC_COMBINED_PAGE_0_LOG_LEVEL 3
|
|
#endif
|
|
|
|
// <o> ANT_BSC_COMBINED_PAGE_0_INFO_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef ANT_BSC_COMBINED_PAGE_0_INFO_COLOR
|
|
#define ANT_BSC_COMBINED_PAGE_0_INFO_COLOR 0
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// <e> ANT_BSC_PAGE_0_LOG_ENABLED - Enables logging of BSC page 0 in the module.
|
|
//==========================================================
|
|
#ifndef ANT_BSC_PAGE_0_LOG_ENABLED
|
|
#define ANT_BSC_PAGE_0_LOG_ENABLED 0
|
|
#endif
|
|
// <o> ANT_BSC_PAGE_0_LOG_LEVEL - Default Severity level
|
|
|
|
// <0=> Off
|
|
// <1=> Error
|
|
// <2=> Warning
|
|
// <3=> Info
|
|
// <4=> Debug
|
|
|
|
#ifndef ANT_BSC_PAGE_0_LOG_LEVEL
|
|
#define ANT_BSC_PAGE_0_LOG_LEVEL 3
|
|
#endif
|
|
|
|
// <o> ANT_BSC_PAGE_0_INFO_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef ANT_BSC_PAGE_0_INFO_COLOR
|
|
#define ANT_BSC_PAGE_0_INFO_COLOR 0
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// <e> ANT_BSC_PAGE_1_LOG_ENABLED - Enables logging of BSC page 1 in the module.
|
|
//==========================================================
|
|
#ifndef ANT_BSC_PAGE_1_LOG_ENABLED
|
|
#define ANT_BSC_PAGE_1_LOG_ENABLED 0
|
|
#endif
|
|
// <o> ANT_BSC_PAGE_1_LOG_LEVEL - Default Severity level
|
|
|
|
// <0=> Off
|
|
// <1=> Error
|
|
// <2=> Warning
|
|
// <3=> Info
|
|
// <4=> Debug
|
|
|
|
#ifndef ANT_BSC_PAGE_1_LOG_LEVEL
|
|
#define ANT_BSC_PAGE_1_LOG_LEVEL 3
|
|
#endif
|
|
|
|
// <o> ANT_BSC_PAGE_1_INFO_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef ANT_BSC_PAGE_1_INFO_COLOR
|
|
#define ANT_BSC_PAGE_1_INFO_COLOR 0
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// <e> ANT_BSC_PAGE_2_LOG_ENABLED - Enables logging of BSC page 2 in the module.
|
|
//==========================================================
|
|
#ifndef ANT_BSC_PAGE_2_LOG_ENABLED
|
|
#define ANT_BSC_PAGE_2_LOG_ENABLED 0
|
|
#endif
|
|
// <o> ANT_BSC_PAGE_2_LOG_LEVEL - Default Severity level
|
|
|
|
// <0=> Off
|
|
// <1=> Error
|
|
// <2=> Warning
|
|
// <3=> Info
|
|
// <4=> Debug
|
|
|
|
#ifndef ANT_BSC_PAGE_2_LOG_LEVEL
|
|
#define ANT_BSC_PAGE_2_LOG_LEVEL 3
|
|
#endif
|
|
|
|
// <o> ANT_BSC_PAGE_2_INFO_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef ANT_BSC_PAGE_2_INFO_COLOR
|
|
#define ANT_BSC_PAGE_2_INFO_COLOR 0
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// <e> ANT_BSC_PAGE_3_LOG_ENABLED - Enables logging of BSC page 3 in the module.
|
|
//==========================================================
|
|
#ifndef ANT_BSC_PAGE_3_LOG_ENABLED
|
|
#define ANT_BSC_PAGE_3_LOG_ENABLED 0
|
|
#endif
|
|
// <o> ANT_BSC_PAGE_3_LOG_LEVEL - Default Severity level
|
|
|
|
// <0=> Off
|
|
// <1=> Error
|
|
// <2=> Warning
|
|
// <3=> Info
|
|
// <4=> Debug
|
|
|
|
#ifndef ANT_BSC_PAGE_3_LOG_LEVEL
|
|
#define ANT_BSC_PAGE_3_LOG_LEVEL 3
|
|
#endif
|
|
|
|
// <o> ANT_BSC_PAGE_3_INFO_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef ANT_BSC_PAGE_3_INFO_COLOR
|
|
#define ANT_BSC_PAGE_3_INFO_COLOR 0
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// <e> ANT_BSC_PAGE_4_LOG_ENABLED - Enables logging of BSC page 4 in the module.
|
|
//==========================================================
|
|
#ifndef ANT_BSC_PAGE_4_LOG_ENABLED
|
|
#define ANT_BSC_PAGE_4_LOG_ENABLED 0
|
|
#endif
|
|
// <o> ANT_BSC_PAGE_4_LOG_LEVEL - Default Severity level
|
|
|
|
// <0=> Off
|
|
// <1=> Error
|
|
// <2=> Warning
|
|
// <3=> Info
|
|
// <4=> Debug
|
|
|
|
#ifndef ANT_BSC_PAGE_4_LOG_LEVEL
|
|
#define ANT_BSC_PAGE_4_LOG_LEVEL 3
|
|
#endif
|
|
|
|
// <o> ANT_BSC_PAGE_4_INFO_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef ANT_BSC_PAGE_4_INFO_COLOR
|
|
#define ANT_BSC_PAGE_4_INFO_COLOR 0
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// <e> ANT_BSC_PAGE_5_LOG_ENABLED - Enables logging of BSC page 5 in the module.
|
|
//==========================================================
|
|
#ifndef ANT_BSC_PAGE_5_LOG_ENABLED
|
|
#define ANT_BSC_PAGE_5_LOG_ENABLED 0
|
|
#endif
|
|
// <o> ANT_BSC_PAGE_5_LOG_LEVEL - Default Severity level
|
|
|
|
// <0=> Off
|
|
// <1=> Error
|
|
// <2=> Warning
|
|
// <3=> Info
|
|
// <4=> Debug
|
|
|
|
#ifndef ANT_BSC_PAGE_5_LOG_LEVEL
|
|
#define ANT_BSC_PAGE_5_LOG_LEVEL 3
|
|
#endif
|
|
|
|
// <o> ANT_BSC_PAGE_5_INFO_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef ANT_BSC_PAGE_5_INFO_COLOR
|
|
#define ANT_BSC_PAGE_5_INFO_COLOR 0
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// </e>
|
|
|
|
// <q> ANT_CHANNEL_CONFIG_ENABLED - ant_channel_config - ANT common channel configuration
|
|
|
|
#ifndef ANT_CHANNEL_CONFIG_ENABLED
|
|
#define ANT_CHANNEL_CONFIG_ENABLED 0
|
|
#endif
|
|
|
|
// <e> ANT_COMMON_PAGE_70_ENABLED - ant_common_page_70 - ANT+ common page 70
|
|
//==========================================================
|
|
#ifndef ANT_COMMON_PAGE_70_ENABLED
|
|
#define ANT_COMMON_PAGE_70_ENABLED 0
|
|
#endif
|
|
// <e> ANT_COMMON_PAGE_70_LOG_ENABLED - Enables logging of common page 70 in the module.
|
|
//==========================================================
|
|
#ifndef ANT_COMMON_PAGE_70_LOG_ENABLED
|
|
#define ANT_COMMON_PAGE_70_LOG_ENABLED 0
|
|
#endif
|
|
// <o> ANT_COMMON_PAGE_70_LOG_LEVEL - Default Severity level
|
|
|
|
// <0=> Off
|
|
// <1=> Error
|
|
// <2=> Warning
|
|
// <3=> Info
|
|
// <4=> Debug
|
|
|
|
#ifndef ANT_COMMON_PAGE_70_LOG_LEVEL
|
|
#define ANT_COMMON_PAGE_70_LOG_LEVEL 3
|
|
#endif
|
|
|
|
// <o> ANT_COMMON_PAGE_70_INFO_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef ANT_COMMON_PAGE_70_INFO_COLOR
|
|
#define ANT_COMMON_PAGE_70_INFO_COLOR 0
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// </e>
|
|
|
|
// <e> ANT_COMMON_PAGE_80_ENABLED - ant_common_page_80 - ANT+ common page 80
|
|
//==========================================================
|
|
#ifndef ANT_COMMON_PAGE_80_ENABLED
|
|
#define ANT_COMMON_PAGE_80_ENABLED 0
|
|
#endif
|
|
// <e> ANT_COMMON_PAGE_80_LOG_ENABLED - Enables logging of common page 80 in the module.
|
|
//==========================================================
|
|
#ifndef ANT_COMMON_PAGE_80_LOG_ENABLED
|
|
#define ANT_COMMON_PAGE_80_LOG_ENABLED 0
|
|
#endif
|
|
// <o> ANT_COMMON_PAGE_80_LOG_LEVEL - Default Severity level
|
|
|
|
// <0=> Off
|
|
// <1=> Error
|
|
// <2=> Warning
|
|
// <3=> Info
|
|
// <4=> Debug
|
|
|
|
#ifndef ANT_COMMON_PAGE_80_LOG_LEVEL
|
|
#define ANT_COMMON_PAGE_80_LOG_LEVEL 3
|
|
#endif
|
|
|
|
// <o> ANT_COMMON_PAGE_80_INFO_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef ANT_COMMON_PAGE_80_INFO_COLOR
|
|
#define ANT_COMMON_PAGE_80_INFO_COLOR 0
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// </e>
|
|
|
|
// <e> ANT_COMMON_PAGE_81_ENABLED - ant_common_page_81 - ANT+ common page 81
|
|
//==========================================================
|
|
#ifndef ANT_COMMON_PAGE_81_ENABLED
|
|
#define ANT_COMMON_PAGE_81_ENABLED 0
|
|
#endif
|
|
// <e> ANT_COMMON_PAGE_81_LOG_ENABLED - Enables logging of common page 81 in the module.
|
|
//==========================================================
|
|
#ifndef ANT_COMMON_PAGE_81_LOG_ENABLED
|
|
#define ANT_COMMON_PAGE_81_LOG_ENABLED 0
|
|
#endif
|
|
// <o> ANT_COMMON_PAGE_81_LOG_LEVEL - Default Severity level
|
|
|
|
// <0=> Off
|
|
// <1=> Error
|
|
// <2=> Warning
|
|
// <3=> Info
|
|
// <4=> Debug
|
|
|
|
#ifndef ANT_COMMON_PAGE_81_LOG_LEVEL
|
|
#define ANT_COMMON_PAGE_81_LOG_LEVEL 3
|
|
#endif
|
|
|
|
// <o> ANT_COMMON_PAGE_81_INFO_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef ANT_COMMON_PAGE_81_INFO_COLOR
|
|
#define ANT_COMMON_PAGE_81_INFO_COLOR 0
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// </e>
|
|
|
|
// <q> ANT_ENCRYPT_CONFIG_ENABLED - ant_encrypt_config - Cryptographic ANT stack configuration
|
|
|
|
#ifndef ANT_ENCRYPT_CONFIG_ENABLED
|
|
#define ANT_ENCRYPT_CONFIG_ENABLED 0
|
|
#endif
|
|
|
|
// <q> ANT_ENCRYPT_NEGOTIATION_SLAVE_ENABLED - ant_encrypt_negotiation_slave - Encryption negotiation for encrypted ANT slave channels
|
|
|
|
#ifndef ANT_ENCRYPT_NEGOTIATION_SLAVE_ENABLED
|
|
#define ANT_ENCRYPT_NEGOTIATION_SLAVE_ENABLED 0
|
|
#endif
|
|
|
|
// <e> ANT_HRM_ENABLED - ant_hrm - Heart Rate Monitor Profile
|
|
//==========================================================
|
|
#ifndef ANT_HRM_ENABLED
|
|
#define ANT_HRM_ENABLED 0
|
|
#endif
|
|
// <e> ANT_HRM_LOG_ENABLED - Enables general logging in the module.
|
|
//==========================================================
|
|
#ifndef ANT_HRM_LOG_ENABLED
|
|
#define ANT_HRM_LOG_ENABLED 0
|
|
#endif
|
|
// <o> ANT_HRM_LOG_LEVEL - Default Severity level
|
|
|
|
// <0=> Off
|
|
// <1=> Error
|
|
// <2=> Warning
|
|
// <3=> Info
|
|
// <4=> Debug
|
|
|
|
#ifndef ANT_HRM_LOG_LEVEL
|
|
#define ANT_HRM_LOG_LEVEL 3
|
|
#endif
|
|
|
|
// <o> ANT_HRM_INFO_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef ANT_HRM_INFO_COLOR
|
|
#define ANT_HRM_INFO_COLOR 0
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// <e> ANT_HRM_PAGE_0_LOG_ENABLED - Enables logging of HRM page 0 in the module.
|
|
//==========================================================
|
|
#ifndef ANT_HRM_PAGE_0_LOG_ENABLED
|
|
#define ANT_HRM_PAGE_0_LOG_ENABLED 0
|
|
#endif
|
|
// <o> ANT_HRM_PAGE_0_LOG_LEVEL - Default Severity level
|
|
|
|
// <0=> Off
|
|
// <1=> Error
|
|
// <2=> Warning
|
|
// <3=> Info
|
|
// <4=> Debug
|
|
|
|
#ifndef ANT_HRM_PAGE_0_LOG_LEVEL
|
|
#define ANT_HRM_PAGE_0_LOG_LEVEL 3
|
|
#endif
|
|
|
|
// <o> ANT_HRM_PAGE_0_INFO_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef ANT_HRM_PAGE_0_INFO_COLOR
|
|
#define ANT_HRM_PAGE_0_INFO_COLOR 0
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// <e> ANT_HRM_PAGE_1_LOG_ENABLED - Enables logging of HRM page 1 in the module.
|
|
//==========================================================
|
|
#ifndef ANT_HRM_PAGE_1_LOG_ENABLED
|
|
#define ANT_HRM_PAGE_1_LOG_ENABLED 0
|
|
#endif
|
|
// <o> ANT_HRM_PAGE_1_LOG_LEVEL - Default Severity level
|
|
|
|
// <0=> Off
|
|
// <1=> Error
|
|
// <2=> Warning
|
|
// <3=> Info
|
|
// <4=> Debug
|
|
|
|
#ifndef ANT_HRM_PAGE_1_LOG_LEVEL
|
|
#define ANT_HRM_PAGE_1_LOG_LEVEL 3
|
|
#endif
|
|
|
|
// <o> ANT_HRM_PAGE_1_INFO_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef ANT_HRM_PAGE_1_INFO_COLOR
|
|
#define ANT_HRM_PAGE_1_INFO_COLOR 0
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// <e> ANT_HRM_PAGE_2_LOG_ENABLED - Enables logging of HRM page 2 in the module.
|
|
//==========================================================
|
|
#ifndef ANT_HRM_PAGE_2_LOG_ENABLED
|
|
#define ANT_HRM_PAGE_2_LOG_ENABLED 0
|
|
#endif
|
|
// <o> ANT_HRM_PAGE_2_LOG_LEVEL - Default Severity level
|
|
|
|
// <0=> Off
|
|
// <1=> Error
|
|
// <2=> Warning
|
|
// <3=> Info
|
|
// <4=> Debug
|
|
|
|
#ifndef ANT_HRM_PAGE_2_LOG_LEVEL
|
|
#define ANT_HRM_PAGE_2_LOG_LEVEL 3
|
|
#endif
|
|
|
|
// <o> ANT_HRM_PAGE_2_INFO_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef ANT_HRM_PAGE_2_INFO_COLOR
|
|
#define ANT_HRM_PAGE_2_INFO_COLOR 0
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// <e> ANT_HRM_PAGE_3_LOG_ENABLED - Enables logging of HRM page 3 in the module.
|
|
//==========================================================
|
|
#ifndef ANT_HRM_PAGE_3_LOG_ENABLED
|
|
#define ANT_HRM_PAGE_3_LOG_ENABLED 0
|
|
#endif
|
|
// <o> ANT_HRM_PAGE_3_LOG_LEVEL - Default Severity level
|
|
|
|
// <0=> Off
|
|
// <1=> Error
|
|
// <2=> Warning
|
|
// <3=> Info
|
|
// <4=> Debug
|
|
|
|
#ifndef ANT_HRM_PAGE_3_LOG_LEVEL
|
|
#define ANT_HRM_PAGE_3_LOG_LEVEL 3
|
|
#endif
|
|
|
|
// <o> ANT_HRM_PAGE_3_INFO_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef ANT_HRM_PAGE_3_INFO_COLOR
|
|
#define ANT_HRM_PAGE_3_INFO_COLOR 0
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// <e> ANT_HRM_PAGE_4_LOG_ENABLED - Enables logging of HRM page 4 in the module.
|
|
//==========================================================
|
|
#ifndef ANT_HRM_PAGE_4_LOG_ENABLED
|
|
#define ANT_HRM_PAGE_4_LOG_ENABLED 0
|
|
#endif
|
|
// <o> ANT_HRM_PAGE_4_LOG_LEVEL - Default Severity level
|
|
|
|
// <0=> Off
|
|
// <1=> Error
|
|
// <2=> Warning
|
|
// <3=> Info
|
|
// <4=> Debug
|
|
|
|
#ifndef ANT_HRM_PAGE_4_LOG_LEVEL
|
|
#define ANT_HRM_PAGE_4_LOG_LEVEL 3
|
|
#endif
|
|
|
|
// <o> ANT_HRM_PAGE_4_INFO_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef ANT_HRM_PAGE_4_INFO_COLOR
|
|
#define ANT_HRM_PAGE_4_INFO_COLOR 0
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// </e>
|
|
|
|
// <q> ANT_KEY_MANAGER_ENABLED - ant_key_manager - Software Component
|
|
|
|
#ifndef ANT_KEY_MANAGER_ENABLED
|
|
#define ANT_KEY_MANAGER_ENABLED 0
|
|
#endif
|
|
|
|
// <q> ANT_REQUEST_CONTROLLER_ENABLED - ant_request_controller - ANT+ request controller
|
|
|
|
#ifndef ANT_REQUEST_CONTROLLER_ENABLED
|
|
#define ANT_REQUEST_CONTROLLER_ENABLED 0
|
|
#endif
|
|
|
|
// <e> ANT_SDM_ENABLED - ant_sdm - Stride Based Speed and Distance Monitor Profile
|
|
//==========================================================
|
|
#ifndef ANT_SDM_ENABLED
|
|
#define ANT_SDM_ENABLED 0
|
|
#endif
|
|
// <e> ANT_SDM_LOG_ENABLED - Enables general logging in the module.
|
|
//==========================================================
|
|
// <q> BSP_BTN_BLE_ENABLED - bsp_btn_ble - Button Control for BLE
|
|
|
|
#ifndef BSP_BTN_BLE_ENABLED
|
|
#define BSP_BTN_BLE_ENABLED 1
|
|
#endif
|
|
// <o> ANT_SDM_LOG_LEVEL - Default Severity level
|
|
|
|
// <0=> Off
|
|
// <1=> Error
|
|
// <2=> Warning
|
|
// <3=> Info
|
|
// <4=> Debug
|
|
|
|
#ifndef ANT_SDM_LOG_LEVEL
|
|
#define ANT_SDM_LOG_LEVEL 3
|
|
#endif
|
|
|
|
// <o> ANT_SDM_INFO_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef ANT_SDM_INFO_COLOR
|
|
#define ANT_SDM_INFO_COLOR 0
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// </e>
|
|
|
|
// <e> ANT_SEARCH_CONFIG_ENABLED - ant_search_config - ANT common search configuration
|
|
//==========================================================
|
|
#ifndef ANT_SEARCH_CONFIG_ENABLED
|
|
#define ANT_SEARCH_CONFIG_ENABLED 0
|
|
#endif
|
|
// <o> ANT_DEFAULT_LOW_PRIORITY_TIMEOUT - Default low priority search time-out. <0-255>
|
|
|
|
#ifndef ANT_DEFAULT_LOW_PRIORITY_TIMEOUT
|
|
#define ANT_DEFAULT_LOW_PRIORITY_TIMEOUT 2
|
|
#endif
|
|
|
|
// <o> ANT_DEFAULT_HIGH_PRIORITY_TIMEOUT - Default high priority search time-out. <0-255>
|
|
|
|
#ifndef ANT_DEFAULT_HIGH_PRIORITY_TIMEOUT
|
|
#define ANT_DEFAULT_HIGH_PRIORITY_TIMEOUT 10
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// <e> ANT_STATE_INDICATOR_ENABLED - ant_state_indicator - ANT state indicator using BSP
|
|
//==========================================================
|
|
#ifndef ANT_STATE_INDICATOR_ENABLED
|
|
#define ANT_STATE_INDICATOR_ENABLED 0
|
|
#endif
|
|
// <o> ANT_STATE_INDICATOR_CONFIG_SHUTDOWN_HANDLER_PRIORITY - Shutdown observer priority.
|
|
#ifndef ANT_STATE_INDICATOR_CONFIG_SHUTDOWN_HANDLER_PRIORITY
|
|
#define ANT_STATE_INDICATOR_CONFIG_SHUTDOWN_HANDLER_PRIORITY 1
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// </h>
|
|
//==========================================================
|
|
|
|
// <h> nRF_BLE
|
|
|
|
//==========================================================
|
|
// <q> BLE_ADVERTISING_ENABLED - ble_advertising - Advertising module
|
|
|
|
#ifndef BLE_ADVERTISING_ENABLED
|
|
#define BLE_ADVERTISING_ENABLED 1
|
|
#endif
|
|
|
|
// <q> BLE_DTM_ENABLED - ble_dtm - Module for testing RF/PHY using DTM commands
|
|
|
|
#ifndef BLE_DTM_ENABLED
|
|
#define BLE_DTM_ENABLED 0
|
|
#endif
|
|
|
|
// <q> BLE_RACP_ENABLED - ble_racp - Record Access Control Point library
|
|
|
|
#ifndef BLE_RACP_ENABLED
|
|
#define BLE_RACP_ENABLED 0
|
|
#endif
|
|
|
|
// <e> NRF_BLE_CONN_PARAMS_ENABLED - ble_conn_params - Initiating and executing a connection parameters negotiation procedure
|
|
//==========================================================
|
|
#ifndef NRF_BLE_CONN_PARAMS_ENABLED
|
|
#define NRF_BLE_CONN_PARAMS_ENABLED 1
|
|
#endif
|
|
// <o> NRF_BLE_CONN_PARAMS_MAX_SLAVE_LATENCY_DEVIATION - The largest acceptable deviation in slave latency.
|
|
// <i> The largest deviation (+ or -) from the requested slave latency that will not be renegotiated.
|
|
|
|
#ifndef NRF_BLE_CONN_PARAMS_MAX_SLAVE_LATENCY_DEVIATION
|
|
#define NRF_BLE_CONN_PARAMS_MAX_SLAVE_LATENCY_DEVIATION 499
|
|
#endif
|
|
|
|
// <o> NRF_BLE_CONN_PARAMS_MAX_SUPERVISION_TIMEOUT_DEVIATION - The largest acceptable deviation (in 10 ms units) in supervision timeout.
|
|
// <i> The largest deviation (+ or -, in 10 ms units) from the requested supervision timeout that will not be renegotiated.
|
|
|
|
#ifndef NRF_BLE_CONN_PARAMS_MAX_SUPERVISION_TIMEOUT_DEVIATION
|
|
#define NRF_BLE_CONN_PARAMS_MAX_SUPERVISION_TIMEOUT_DEVIATION 65535
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// <q> NRF_BLE_GATT_ENABLED - nrf_ble_gatt - GATT module
|
|
|
|
#ifndef NRF_BLE_GATT_ENABLED
|
|
#define NRF_BLE_GATT_ENABLED 1
|
|
#endif
|
|
|
|
// <e> NRF_BLE_QWR_ENABLED - nrf_ble_qwr - Queued writes support module (prepare/execute write)
|
|
//==========================================================
|
|
#ifndef NRF_BLE_QWR_ENABLED
|
|
#define NRF_BLE_QWR_ENABLED 1
|
|
#endif
|
|
// <o> NRF_BLE_QWR_MAX_ATTR - Maximum number of attribute handles that can be registered. This number must be adjusted according to the
|
|
// number of attributes for which Queued Writes will be enabled. If it is zero, the module will reject all Queued Write requests.
|
|
#ifndef NRF_BLE_QWR_MAX_ATTR
|
|
#define NRF_BLE_QWR_MAX_ATTR 0
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// <e> PEER_MANAGER_ENABLED - peer_manager - Peer Manager
|
|
//==========================================================
|
|
#ifndef PEER_MANAGER_ENABLED
|
|
#define PEER_MANAGER_ENABLED 1
|
|
#endif
|
|
// <o> PM_MAX_REGISTRANTS - Number of event handlers that can be registered.
|
|
#ifndef PM_MAX_REGISTRANTS
|
|
#define PM_MAX_REGISTRANTS 3
|
|
#endif
|
|
|
|
// <o> PM_FLASH_BUFFERS - Number of internal buffers for flash operations.
|
|
// <i> Decrease this value to lower RAM usage.
|
|
|
|
#ifndef PM_FLASH_BUFFERS
|
|
#define PM_FLASH_BUFFERS 4
|
|
#endif
|
|
|
|
// <q> PM_CENTRAL_ENABLED - Enable/disable central-specific Peer Manager functionality.
|
|
|
|
// <i> Enable/disable central-specific Peer Manager functionality.
|
|
|
|
#ifndef PM_CENTRAL_ENABLED
|
|
#define PM_CENTRAL_ENABLED 0
|
|
#endif
|
|
|
|
// <q> PM_SERVICE_CHANGED_ENABLED - Enable/disable the service changed management for GATT server in Peer Manager.
|
|
|
|
// <i> If not using a GATT server, or using a server without a service changed characteristic,
|
|
// <i> disable this to save code space.
|
|
|
|
#ifndef PM_SERVICE_CHANGED_ENABLED
|
|
#define PM_SERVICE_CHANGED_ENABLED 1
|
|
#endif
|
|
|
|
// <q> PM_PEER_RANKS_ENABLED - Enable/disable the peer rank management in Peer Manager.
|
|
|
|
// <i> Set this to false to save code space if not using the peer rank API.
|
|
|
|
#ifndef PM_PEER_RANKS_ENABLED
|
|
#define PM_PEER_RANKS_ENABLED 1
|
|
#endif
|
|
|
|
// <q> PM_LESC_ENABLED - Enable/disable LESC support in Peer Manager.
|
|
|
|
// <i> If set to true, you need to call nrf_ble_lesc_request_handler() in the main loop to respond to LESC-related BLE events. If LESC
|
|
// support is not required, set this to false to save code space.
|
|
|
|
#ifndef PM_LESC_ENABLED
|
|
#define PM_LESC_ENABLED 0
|
|
#endif
|
|
|
|
// <e> PM_RA_PROTECTION_ENABLED - Enable/disable protection against repeated pairing attempts in Peer Manager.
|
|
//==========================================================
|
|
#ifndef PM_RA_PROTECTION_ENABLED
|
|
#define PM_RA_PROTECTION_ENABLED 0
|
|
#endif
|
|
// <o> PM_RA_PROTECTION_TRACKED_PEERS_NUM - Maximum number of peers whose authorization status can be tracked.
|
|
#ifndef PM_RA_PROTECTION_TRACKED_PEERS_NUM
|
|
#define PM_RA_PROTECTION_TRACKED_PEERS_NUM 8
|
|
#endif
|
|
|
|
// <o> PM_RA_PROTECTION_MIN_WAIT_INTERVAL - Minimum waiting interval (in ms) before a new pairing attempt can be initiated.
|
|
#ifndef PM_RA_PROTECTION_MIN_WAIT_INTERVAL
|
|
#define PM_RA_PROTECTION_MIN_WAIT_INTERVAL 4000
|
|
#endif
|
|
|
|
// <o> PM_RA_PROTECTION_MAX_WAIT_INTERVAL - Maximum waiting interval (in ms) before a new pairing attempt can be initiated.
|
|
#ifndef PM_RA_PROTECTION_MAX_WAIT_INTERVAL
|
|
#define PM_RA_PROTECTION_MAX_WAIT_INTERVAL 64000
|
|
#endif
|
|
|
|
// <o> PM_RA_PROTECTION_REWARD_PERIOD - Reward period (in ms).
|
|
// <i> The waiting interval is gradually decreased when no new failed pairing attempts are made during reward period.
|
|
|
|
#ifndef PM_RA_PROTECTION_REWARD_PERIOD
|
|
#define PM_RA_PROTECTION_REWARD_PERIOD 10000
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// <o> PM_HANDLER_SEC_DELAY_MS - Delay before starting security.
|
|
// <i> This might be necessary for interoperability reasons, especially as peripheral.
|
|
|
|
#ifndef PM_HANDLER_SEC_DELAY_MS
|
|
#define PM_HANDLER_SEC_DELAY_MS 0
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// </h>
|
|
//==========================================================
|
|
|
|
// <h> nRF_BLE_Services
|
|
|
|
//==========================================================
|
|
// <q> BLE_ANCS_C_ENABLED - ble_ancs_c - Apple Notification Service Client
|
|
|
|
#ifndef BLE_ANCS_C_ENABLED
|
|
#define BLE_ANCS_C_ENABLED 0
|
|
#endif
|
|
|
|
// <q> BLE_ANS_C_ENABLED - ble_ans_c - Alert Notification Service Client
|
|
|
|
#ifndef BLE_ANS_C_ENABLED
|
|
#define BLE_ANS_C_ENABLED 1
|
|
#endif
|
|
|
|
#ifndef BLE_ANS_C_LOG_ENABLED
|
|
#define BLE_ANS_C_LOG_ENABLED 1
|
|
#endif
|
|
|
|
#ifndef BLE_ANS_C_LOG_LEVEL
|
|
#define BLE_ANS_C_LOG_LEVEL 3
|
|
#endif
|
|
|
|
// <q> BLE_BAS_C_ENABLED - ble_bas_c - Battery Service Client
|
|
|
|
#ifndef BLE_BAS_C_ENABLED
|
|
#define BLE_BAS_C_ENABLED 0
|
|
#endif
|
|
|
|
// <e> BLE_BAS_ENABLED - ble_bas - Battery Service
|
|
//==========================================================
|
|
#ifndef BLE_BAS_ENABLED
|
|
#define BLE_BAS_ENABLED 1
|
|
#endif
|
|
// <e> BLE_BAS_CONFIG_LOG_ENABLED - Enables logging in the module.
|
|
//==========================================================
|
|
#ifndef BLE_BAS_CONFIG_LOG_ENABLED
|
|
#define BLE_BAS_CONFIG_LOG_ENABLED 0
|
|
#endif
|
|
// <o> BLE_BAS_CONFIG_LOG_LEVEL - Default Severity level
|
|
|
|
// <0=> Off
|
|
// <1=> Error
|
|
// <2=> Warning
|
|
// <3=> Info
|
|
// <4=> Debug
|
|
|
|
#ifndef BLE_BAS_CONFIG_LOG_LEVEL
|
|
#define BLE_BAS_CONFIG_LOG_LEVEL 3
|
|
#endif
|
|
|
|
// <o> BLE_BAS_CONFIG_INFO_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef BLE_BAS_CONFIG_INFO_COLOR
|
|
#define BLE_BAS_CONFIG_INFO_COLOR 0
|
|
#endif
|
|
|
|
// <o> BLE_BAS_CONFIG_DEBUG_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef BLE_BAS_CONFIG_DEBUG_COLOR
|
|
#define BLE_BAS_CONFIG_DEBUG_COLOR 0
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// </e>
|
|
|
|
// <q> BLE_CSCS_ENABLED - ble_cscs - Cycling Speed and Cadence Service
|
|
|
|
#ifndef BLE_CSCS_ENABLED
|
|
#define BLE_CSCS_ENABLED 0
|
|
#endif
|
|
|
|
// <q> BLE_CTS_C_ENABLED - ble_cts_c - Current Time Service Client
|
|
|
|
#ifndef BLE_CTS_C_ENABLED
|
|
#define BLE_CTS_C_ENABLED 1
|
|
#endif
|
|
|
|
#ifndef BLE_DB_DISCOVERY_ENABLED
|
|
#define BLE_DB_DISCOVERY_ENABLED 1
|
|
#endif
|
|
|
|
// <q> BLE_DIS_ENABLED - ble_dis - Device Information Service
|
|
|
|
#ifndef BLE_DIS_ENABLED
|
|
#define BLE_DIS_ENABLED 1
|
|
#endif
|
|
|
|
// <q> BLE_GLS_ENABLED - ble_gls - Glucose Service
|
|
|
|
#ifndef BLE_GLS_ENABLED
|
|
#define BLE_GLS_ENABLED 0
|
|
#endif
|
|
|
|
// <q> BLE_HIDS_ENABLED - ble_hids - Human Interface Device Service
|
|
|
|
#ifndef BLE_HIDS_ENABLED
|
|
#define BLE_HIDS_ENABLED 0
|
|
#endif
|
|
|
|
// <q> BLE_HRS_C_ENABLED - ble_hrs_c - Heart Rate Service Client
|
|
|
|
#ifndef BLE_HRS_C_ENABLED
|
|
#define BLE_HRS_C_ENABLED 0
|
|
#endif
|
|
|
|
// <q> BLE_HRS_ENABLED - ble_hrs - Heart Rate Service
|
|
|
|
#ifndef BLE_HRS_ENABLED
|
|
#define BLE_HRS_ENABLED 1
|
|
#endif
|
|
|
|
// <q> BLE_HTS_ENABLED - ble_hts - Health Thermometer Service
|
|
|
|
#ifndef BLE_HTS_ENABLED
|
|
#define BLE_HTS_ENABLED 0
|
|
#endif
|
|
|
|
// <q> BLE_IAS_C_ENABLED - ble_ias_c - Immediate Alert Service Client
|
|
|
|
#ifndef BLE_IAS_C_ENABLED
|
|
#define BLE_IAS_C_ENABLED 0
|
|
#endif
|
|
|
|
// <e> BLE_IAS_ENABLED - ble_ias - Immediate Alert Service
|
|
//==========================================================
|
|
#ifndef BLE_IAS_ENABLED
|
|
#define BLE_IAS_ENABLED 0
|
|
#endif
|
|
// <e> BLE_IAS_CONFIG_LOG_ENABLED - Enables logging in the module.
|
|
//==========================================================
|
|
#ifndef BLE_IAS_CONFIG_LOG_ENABLED
|
|
#define BLE_IAS_CONFIG_LOG_ENABLED 0
|
|
#endif
|
|
// <o> BLE_IAS_CONFIG_LOG_LEVEL - Default Severity level
|
|
|
|
// <0=> Off
|
|
// <1=> Error
|
|
// <2=> Warning
|
|
// <3=> Info
|
|
// <4=> Debug
|
|
|
|
#ifndef BLE_IAS_CONFIG_LOG_LEVEL
|
|
#define BLE_IAS_CONFIG_LOG_LEVEL 3
|
|
#endif
|
|
|
|
// <o> BLE_IAS_CONFIG_INFO_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef BLE_IAS_CONFIG_INFO_COLOR
|
|
#define BLE_IAS_CONFIG_INFO_COLOR 0
|
|
#endif
|
|
|
|
// <o> BLE_IAS_CONFIG_DEBUG_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef BLE_IAS_CONFIG_DEBUG_COLOR
|
|
#define BLE_IAS_CONFIG_DEBUG_COLOR 0
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// </e>
|
|
|
|
// <q> BLE_LBS_C_ENABLED - ble_lbs_c - Nordic LED Button Service Client
|
|
|
|
#ifndef BLE_LBS_C_ENABLED
|
|
#define BLE_LBS_C_ENABLED 0
|
|
#endif
|
|
|
|
// <q> BLE_LBS_ENABLED - ble_lbs - LED Button Service
|
|
|
|
#ifndef BLE_LBS_ENABLED
|
|
#define BLE_LBS_ENABLED 0
|
|
#endif
|
|
|
|
// <q> BLE_LLS_ENABLED - ble_lls - Link Loss Service
|
|
|
|
#ifndef BLE_LLS_ENABLED
|
|
#define BLE_LLS_ENABLED 0
|
|
#endif
|
|
|
|
// <q> BLE_NUS_C_ENABLED - ble_nus_c - Nordic UART Central Service
|
|
|
|
#ifndef BLE_NUS_C_ENABLED
|
|
#define BLE_NUS_C_ENABLED 0
|
|
#endif
|
|
|
|
// <e> BLE_NUS_ENABLED - ble_nus - Nordic UART Service
|
|
//==========================================================
|
|
#ifndef BLE_NUS_ENABLED
|
|
#define BLE_NUS_ENABLED 0
|
|
#endif
|
|
// <e> BLE_NUS_CONFIG_LOG_ENABLED - Enables logging in the module.
|
|
//==========================================================
|
|
#ifndef BLE_NUS_CONFIG_LOG_ENABLED
|
|
#define BLE_NUS_CONFIG_LOG_ENABLED 0
|
|
#endif
|
|
// <o> BLE_NUS_CONFIG_LOG_LEVEL - Default Severity level
|
|
|
|
// <0=> Off
|
|
// <1=> Error
|
|
// <2=> Warning
|
|
// <3=> Info
|
|
// <4=> Debug
|
|
|
|
#ifndef BLE_NUS_CONFIG_LOG_LEVEL
|
|
#define BLE_NUS_CONFIG_LOG_LEVEL 3
|
|
#endif
|
|
|
|
// <o> BLE_NUS_CONFIG_INFO_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef BLE_NUS_CONFIG_INFO_COLOR
|
|
#define BLE_NUS_CONFIG_INFO_COLOR 0
|
|
#endif
|
|
|
|
// <o> BLE_NUS_CONFIG_DEBUG_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef BLE_NUS_CONFIG_DEBUG_COLOR
|
|
#define BLE_NUS_CONFIG_DEBUG_COLOR 0
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// </e>
|
|
|
|
// <q> BLE_RSCS_C_ENABLED - ble_rscs_c - Running Speed and Cadence Client
|
|
|
|
#ifndef BLE_RSCS_C_ENABLED
|
|
#define BLE_RSCS_C_ENABLED 0
|
|
#endif
|
|
|
|
// <q> BLE_RSCS_ENABLED - ble_rscs - Running Speed and Cadence Service
|
|
|
|
#ifndef BLE_RSCS_ENABLED
|
|
#define BLE_RSCS_ENABLED 0
|
|
#endif
|
|
|
|
// <q> BLE_TPS_ENABLED - ble_tps - TX Power Service
|
|
|
|
#ifndef BLE_TPS_ENABLED
|
|
#define BLE_TPS_ENABLED 0
|
|
#endif
|
|
|
|
// </h>
|
|
//==========================================================
|
|
|
|
// <h> nRF_Core
|
|
|
|
//==========================================================
|
|
// <e> NRF_MPU_LIB_ENABLED - nrf_mpu_lib - Module for MPU
|
|
//==========================================================
|
|
#ifndef NRF_MPU_LIB_ENABLED
|
|
#define NRF_MPU_LIB_ENABLED 0
|
|
#endif
|
|
// <q> NRF_MPU_LIB_CLI_CMDS - Enable CLI commands specific to the module.
|
|
|
|
#ifndef NRF_MPU_LIB_CLI_CMDS
|
|
#define NRF_MPU_LIB_CLI_CMDS 0
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// <e> NRF_STACK_GUARD_ENABLED - nrf_stack_guard - Stack guard
|
|
//==========================================================
|
|
#ifndef NRF_STACK_GUARD_ENABLED
|
|
#define NRF_STACK_GUARD_ENABLED 0
|
|
#endif
|
|
// <o> NRF_STACK_GUARD_CONFIG_SIZE - Size of the stack guard.
|
|
|
|
// <5=> 32 bytes
|
|
// <6=> 64 bytes
|
|
// <7=> 128 bytes
|
|
// <8=> 256 bytes
|
|
// <9=> 512 bytes
|
|
// <10=> 1024 bytes
|
|
// <11=> 2048 bytes
|
|
// <12=> 4096 bytes
|
|
|
|
#ifndef NRF_STACK_GUARD_CONFIG_SIZE
|
|
#define NRF_STACK_GUARD_CONFIG_SIZE 7
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// </h>
|
|
//==========================================================
|
|
|
|
// <h> nRF_Crypto
|
|
|
|
//==========================================================
|
|
// <e> NRF_CRYPTO_ENABLED - nrf_crypto - Cryptography library.
|
|
//==========================================================
|
|
#ifndef NRF_CRYPTO_ENABLED
|
|
#define NRF_CRYPTO_ENABLED 1
|
|
#endif
|
|
// <o> NRF_CRYPTO_ALLOCATOR - Memory allocator
|
|
|
|
// <i> Choose memory allocator used by nrf_crypto. Default is alloca if possible or nrf_malloc otherwise. If 'User macros' are selected, the
|
|
// user has to create 'nrf_crypto_allocator.h' file that contains NRF_CRYPTO_ALLOC, NRF_CRYPTO_FREE, and NRF_CRYPTO_ALLOC_ON_STACK. <0=>
|
|
// Default <1=> User macros <2=> On stack (alloca) <3=> C dynamic memory (malloc) <4=> SDK Memory Manager (nrf_malloc)
|
|
|
|
#ifndef NRF_CRYPTO_ALLOCATOR
|
|
#define NRF_CRYPTO_ALLOCATOR 0
|
|
#endif
|
|
|
|
// <e> NRF_CRYPTO_BACKEND_CC310_BL_ENABLED - Enable the ARM Cryptocell CC310 reduced backend.
|
|
|
|
// <i> The CC310 hardware-accelerated cryptography backend with reduced functionality and footprint (only available on nRF52840).
|
|
//==========================================================
|
|
#ifndef NRF_CRYPTO_BACKEND_CC310_BL_ENABLED
|
|
#define NRF_CRYPTO_BACKEND_CC310_BL_ENABLED 0
|
|
#endif
|
|
// <q> NRF_CRYPTO_BACKEND_CC310_BL_ECC_SECP224R1_ENABLED - Enable the secp224r1 elliptic curve support using CC310_BL.
|
|
|
|
#ifndef NRF_CRYPTO_BACKEND_CC310_BL_ECC_SECP224R1_ENABLED
|
|
#define NRF_CRYPTO_BACKEND_CC310_BL_ECC_SECP224R1_ENABLED 0
|
|
#endif
|
|
|
|
// <q> NRF_CRYPTO_BACKEND_CC310_BL_ECC_SECP256R1_ENABLED - Enable the secp256r1 elliptic curve support using CC310_BL.
|
|
|
|
#ifndef NRF_CRYPTO_BACKEND_CC310_BL_ECC_SECP256R1_ENABLED
|
|
#define NRF_CRYPTO_BACKEND_CC310_BL_ECC_SECP256R1_ENABLED 1
|
|
#endif
|
|
|
|
// <q> NRF_CRYPTO_BACKEND_CC310_BL_HASH_SHA256_ENABLED - CC310_BL SHA-256 hash functionality.
|
|
|
|
// <i> CC310_BL backend implementation for hardware-accelerated SHA-256.
|
|
|
|
#ifndef NRF_CRYPTO_BACKEND_CC310_BL_HASH_SHA256_ENABLED
|
|
#define NRF_CRYPTO_BACKEND_CC310_BL_HASH_SHA256_ENABLED 1
|
|
#endif
|
|
|
|
// <q> NRF_CRYPTO_BACKEND_CC310_BL_HASH_AUTOMATIC_RAM_BUFFER_ENABLED - nrf_cc310_bl buffers to RAM before running hash operation
|
|
|
|
// <i> Enabling this makes hashing of addresses in FLASH range possible. Size of buffer allocated for hashing is set by
|
|
// NRF_CRYPTO_BACKEND_CC310_BL_HASH_AUTOMATIC_RAM_BUFFER_SIZE
|
|
|
|
#ifndef NRF_CRYPTO_BACKEND_CC310_BL_HASH_AUTOMATIC_RAM_BUFFER_ENABLED
|
|
#define NRF_CRYPTO_BACKEND_CC310_BL_HASH_AUTOMATIC_RAM_BUFFER_ENABLED 0
|
|
#endif
|
|
|
|
// <o> NRF_CRYPTO_BACKEND_CC310_BL_HASH_AUTOMATIC_RAM_BUFFER_SIZE - nrf_cc310_bl hash outputs digests in little endian
|
|
// <i> Makes the nrf_cc310_bl hash functions output digests in little endian format. Only for use in nRF SDK DFU!
|
|
|
|
#ifndef NRF_CRYPTO_BACKEND_CC310_BL_HASH_AUTOMATIC_RAM_BUFFER_SIZE
|
|
#define NRF_CRYPTO_BACKEND_CC310_BL_HASH_AUTOMATIC_RAM_BUFFER_SIZE 4096
|
|
#endif
|
|
|
|
// <q> NRF_CRYPTO_BACKEND_CC310_BL_INTERRUPTS_ENABLED - Enable Interrupts while support using CC310 bl.
|
|
|
|
// <i> Select a library version compatible with the configuration. When interrupts are disable, a version named _noint must be used
|
|
|
|
#ifndef NRF_CRYPTO_BACKEND_CC310_BL_INTERRUPTS_ENABLED
|
|
#define NRF_CRYPTO_BACKEND_CC310_BL_INTERRUPTS_ENABLED 1
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// <e> NRF_CRYPTO_BACKEND_CC310_ENABLED - Enable the ARM Cryptocell CC310 backend.
|
|
|
|
// <i> The CC310 hardware-accelerated cryptography backend (only available on nRF52840).
|
|
//==========================================================
|
|
#ifndef NRF_CRYPTO_BACKEND_CC310_ENABLED
|
|
#define NRF_CRYPTO_BACKEND_CC310_ENABLED 0
|
|
#endif
|
|
// <q> NRF_CRYPTO_BACKEND_CC310_AES_CBC_ENABLED - Enable the AES CBC mode using CC310.
|
|
|
|
#ifndef NRF_CRYPTO_BACKEND_CC310_AES_CBC_ENABLED
|
|
#define NRF_CRYPTO_BACKEND_CC310_AES_CBC_ENABLED 1
|
|
#endif
|
|
|
|
// <q> NRF_CRYPTO_BACKEND_CC310_AES_CTR_ENABLED - Enable the AES CTR mode using CC310.
|
|
|
|
#ifndef NRF_CRYPTO_BACKEND_CC310_AES_CTR_ENABLED
|
|
#define NRF_CRYPTO_BACKEND_CC310_AES_CTR_ENABLED 1
|
|
#endif
|
|
|
|
// <q> NRF_CRYPTO_BACKEND_CC310_AES_ECB_ENABLED - Enable the AES ECB mode using CC310.
|
|
|
|
#ifndef NRF_CRYPTO_BACKEND_CC310_AES_ECB_ENABLED
|
|
#define NRF_CRYPTO_BACKEND_CC310_AES_ECB_ENABLED 1
|
|
#endif
|
|
|
|
// <q> NRF_CRYPTO_BACKEND_CC310_AES_CBC_MAC_ENABLED - Enable the AES CBC_MAC mode using CC310.
|
|
|
|
#ifndef NRF_CRYPTO_BACKEND_CC310_AES_CBC_MAC_ENABLED
|
|
#define NRF_CRYPTO_BACKEND_CC310_AES_CBC_MAC_ENABLED 1
|
|
#endif
|
|
|
|
// <q> NRF_CRYPTO_BACKEND_CC310_AES_CMAC_ENABLED - Enable the AES CMAC mode using CC310.
|
|
|
|
#ifndef NRF_CRYPTO_BACKEND_CC310_AES_CMAC_ENABLED
|
|
#define NRF_CRYPTO_BACKEND_CC310_AES_CMAC_ENABLED 1
|
|
#endif
|
|
|
|
// <q> NRF_CRYPTO_BACKEND_CC310_AES_CCM_ENABLED - Enable the AES CCM mode using CC310.
|
|
|
|
#ifndef NRF_CRYPTO_BACKEND_CC310_AES_CCM_ENABLED
|
|
#define NRF_CRYPTO_BACKEND_CC310_AES_CCM_ENABLED 1
|
|
#endif
|
|
|
|
// <q> NRF_CRYPTO_BACKEND_CC310_AES_CCM_STAR_ENABLED - Enable the AES CCM* mode using CC310.
|
|
|
|
#ifndef NRF_CRYPTO_BACKEND_CC310_AES_CCM_STAR_ENABLED
|
|
#define NRF_CRYPTO_BACKEND_CC310_AES_CCM_STAR_ENABLED 1
|
|
#endif
|
|
|
|
// <q> NRF_CRYPTO_BACKEND_CC310_CHACHA_POLY_ENABLED - Enable the CHACHA-POLY mode using CC310.
|
|
|
|
#ifndef NRF_CRYPTO_BACKEND_CC310_CHACHA_POLY_ENABLED
|
|
#define NRF_CRYPTO_BACKEND_CC310_CHACHA_POLY_ENABLED 1
|
|
#endif
|
|
|
|
// <q> NRF_CRYPTO_BACKEND_CC310_ECC_SECP160R1_ENABLED - Enable the secp160r1 elliptic curve support using CC310.
|
|
|
|
#ifndef NRF_CRYPTO_BACKEND_CC310_ECC_SECP160R1_ENABLED
|
|
#define NRF_CRYPTO_BACKEND_CC310_ECC_SECP160R1_ENABLED 1
|
|
#endif
|
|
|
|
// <q> NRF_CRYPTO_BACKEND_CC310_ECC_SECP160R2_ENABLED - Enable the secp160r2 elliptic curve support using CC310.
|
|
|
|
#ifndef NRF_CRYPTO_BACKEND_CC310_ECC_SECP160R2_ENABLED
|
|
#define NRF_CRYPTO_BACKEND_CC310_ECC_SECP160R2_ENABLED 1
|
|
#endif
|
|
|
|
// <q> NRF_CRYPTO_BACKEND_CC310_ECC_SECP192R1_ENABLED - Enable the secp192r1 elliptic curve support using CC310.
|
|
|
|
#ifndef NRF_CRYPTO_BACKEND_CC310_ECC_SECP192R1_ENABLED
|
|
#define NRF_CRYPTO_BACKEND_CC310_ECC_SECP192R1_ENABLED 1
|
|
#endif
|
|
|
|
// <q> NRF_CRYPTO_BACKEND_CC310_ECC_SECP224R1_ENABLED - Enable the secp224r1 elliptic curve support using CC310.
|
|
|
|
#ifndef NRF_CRYPTO_BACKEND_CC310_ECC_SECP224R1_ENABLED
|
|
#define NRF_CRYPTO_BACKEND_CC310_ECC_SECP224R1_ENABLED 1
|
|
#endif
|
|
|
|
// <q> NRF_CRYPTO_BACKEND_CC310_ECC_SECP256R1_ENABLED - Enable the secp256r1 elliptic curve support using CC310.
|
|
|
|
#ifndef NRF_CRYPTO_BACKEND_CC310_ECC_SECP256R1_ENABLED
|
|
#define NRF_CRYPTO_BACKEND_CC310_ECC_SECP256R1_ENABLED 1
|
|
#endif
|
|
|
|
// <q> NRF_CRYPTO_BACKEND_CC310_ECC_SECP384R1_ENABLED - Enable the secp384r1 elliptic curve support using CC310.
|
|
|
|
#ifndef NRF_CRYPTO_BACKEND_CC310_ECC_SECP384R1_ENABLED
|
|
#define NRF_CRYPTO_BACKEND_CC310_ECC_SECP384R1_ENABLED 1
|
|
#endif
|
|
|
|
// <q> NRF_CRYPTO_BACKEND_CC310_ECC_SECP521R1_ENABLED - Enable the secp521r1 elliptic curve support using CC310.
|
|
|
|
#ifndef NRF_CRYPTO_BACKEND_CC310_ECC_SECP521R1_ENABLED
|
|
#define NRF_CRYPTO_BACKEND_CC310_ECC_SECP521R1_ENABLED 1
|
|
#endif
|
|
|
|
// <q> NRF_CRYPTO_BACKEND_CC310_ECC_SECP160K1_ENABLED - Enable the secp160k1 elliptic curve support using CC310.
|
|
|
|
#ifndef NRF_CRYPTO_BACKEND_CC310_ECC_SECP160K1_ENABLED
|
|
#define NRF_CRYPTO_BACKEND_CC310_ECC_SECP160K1_ENABLED 1
|
|
#endif
|
|
|
|
// <q> NRF_CRYPTO_BACKEND_CC310_ECC_SECP192K1_ENABLED - Enable the secp192k1 elliptic curve support using CC310.
|
|
|
|
#ifndef NRF_CRYPTO_BACKEND_CC310_ECC_SECP192K1_ENABLED
|
|
#define NRF_CRYPTO_BACKEND_CC310_ECC_SECP192K1_ENABLED 1
|
|
#endif
|
|
|
|
// <q> NRF_CRYPTO_BACKEND_CC310_ECC_SECP224K1_ENABLED - Enable the secp224k1 elliptic curve support using CC310.
|
|
|
|
#ifndef NRF_CRYPTO_BACKEND_CC310_ECC_SECP224K1_ENABLED
|
|
#define NRF_CRYPTO_BACKEND_CC310_ECC_SECP224K1_ENABLED 1
|
|
#endif
|
|
|
|
// <q> NRF_CRYPTO_BACKEND_CC310_ECC_SECP256K1_ENABLED - Enable the secp256k1 elliptic curve support using CC310.
|
|
|
|
#ifndef NRF_CRYPTO_BACKEND_CC310_ECC_SECP256K1_ENABLED
|
|
#define NRF_CRYPTO_BACKEND_CC310_ECC_SECP256K1_ENABLED 1
|
|
#endif
|
|
|
|
// <q> NRF_CRYPTO_BACKEND_CC310_ECC_CURVE25519_ENABLED - Enable the Curve25519 curve support using CC310.
|
|
|
|
#ifndef NRF_CRYPTO_BACKEND_CC310_ECC_CURVE25519_ENABLED
|
|
#define NRF_CRYPTO_BACKEND_CC310_ECC_CURVE25519_ENABLED 1
|
|
#endif
|
|
|
|
// <q> NRF_CRYPTO_BACKEND_CC310_ECC_ED25519_ENABLED - Enable the Ed25519 curve support using CC310.
|
|
|
|
#ifndef NRF_CRYPTO_BACKEND_CC310_ECC_ED25519_ENABLED
|
|
#define NRF_CRYPTO_BACKEND_CC310_ECC_ED25519_ENABLED 1
|
|
#endif
|
|
|
|
// <q> NRF_CRYPTO_BACKEND_CC310_HASH_SHA256_ENABLED - CC310 SHA-256 hash functionality.
|
|
|
|
// <i> CC310 backend implementation for hardware-accelerated SHA-256.
|
|
|
|
#ifndef NRF_CRYPTO_BACKEND_CC310_HASH_SHA256_ENABLED
|
|
#define NRF_CRYPTO_BACKEND_CC310_HASH_SHA256_ENABLED 1
|
|
#endif
|
|
|
|
// <q> NRF_CRYPTO_BACKEND_CC310_HASH_SHA512_ENABLED - CC310 SHA-512 hash functionality
|
|
|
|
// <i> CC310 backend implementation for SHA-512 (in software).
|
|
|
|
#ifndef NRF_CRYPTO_BACKEND_CC310_HASH_SHA512_ENABLED
|
|
#define NRF_CRYPTO_BACKEND_CC310_HASH_SHA512_ENABLED 1
|
|
#endif
|
|
|
|
// <q> NRF_CRYPTO_BACKEND_CC310_HMAC_SHA256_ENABLED - CC310 HMAC using SHA-256
|
|
|
|
// <i> CC310 backend implementation for HMAC using hardware-accelerated SHA-256.
|
|
|
|
#ifndef NRF_CRYPTO_BACKEND_CC310_HMAC_SHA256_ENABLED
|
|
#define NRF_CRYPTO_BACKEND_CC310_HMAC_SHA256_ENABLED 1
|
|
#endif
|
|
|
|
// <q> NRF_CRYPTO_BACKEND_CC310_HMAC_SHA512_ENABLED - CC310 HMAC using SHA-512
|
|
|
|
// <i> CC310 backend implementation for HMAC using SHA-512 (in software).
|
|
|
|
#ifndef NRF_CRYPTO_BACKEND_CC310_HMAC_SHA512_ENABLED
|
|
#define NRF_CRYPTO_BACKEND_CC310_HMAC_SHA512_ENABLED 1
|
|
#endif
|
|
|
|
// <q> NRF_CRYPTO_BACKEND_CC310_RNG_ENABLED - Enable RNG support using CC310.
|
|
|
|
#ifndef NRF_CRYPTO_BACKEND_CC310_RNG_ENABLED
|
|
#define NRF_CRYPTO_BACKEND_CC310_RNG_ENABLED 1
|
|
#endif
|
|
|
|
// <q> NRF_CRYPTO_BACKEND_CC310_INTERRUPTS_ENABLED - Enable Interrupts while support using CC310.
|
|
|
|
// <i> Select a library version compatible with the configuration. When interrupts are disable, a version named _noint must be used
|
|
|
|
#ifndef NRF_CRYPTO_BACKEND_CC310_INTERRUPTS_ENABLED
|
|
#define NRF_CRYPTO_BACKEND_CC310_INTERRUPTS_ENABLED 1
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// <e> NRF_CRYPTO_BACKEND_CIFRA_ENABLED - Enable the Cifra backend.
|
|
//==========================================================
|
|
#ifndef NRF_CRYPTO_BACKEND_CIFRA_ENABLED
|
|
#define NRF_CRYPTO_BACKEND_CIFRA_ENABLED 0
|
|
#endif
|
|
// <q> NRF_CRYPTO_BACKEND_CIFRA_AES_EAX_ENABLED - Enable the AES EAX mode using Cifra.
|
|
|
|
#ifndef NRF_CRYPTO_BACKEND_CIFRA_AES_EAX_ENABLED
|
|
#define NRF_CRYPTO_BACKEND_CIFRA_AES_EAX_ENABLED 1
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// <e> NRF_CRYPTO_BACKEND_MBEDTLS_ENABLED - Enable the mbed TLS backend.
|
|
//==========================================================
|
|
#ifndef NRF_CRYPTO_BACKEND_MBEDTLS_ENABLED
|
|
#define NRF_CRYPTO_BACKEND_MBEDTLS_ENABLED 0
|
|
#endif
|
|
// <q> NRF_CRYPTO_BACKEND_MBEDTLS_AES_CBC_ENABLED - Enable the AES CBC mode mbed TLS.
|
|
|
|
#ifndef NRF_CRYPTO_BACKEND_MBEDTLS_AES_CBC_ENABLED
|
|
#define NRF_CRYPTO_BACKEND_MBEDTLS_AES_CBC_ENABLED 1
|
|
#endif
|
|
|
|
// <q> NRF_CRYPTO_BACKEND_MBEDTLS_AES_CTR_ENABLED - Enable the AES CTR mode using mbed TLS.
|
|
|
|
#ifndef NRF_CRYPTO_BACKEND_MBEDTLS_AES_CTR_ENABLED
|
|
#define NRF_CRYPTO_BACKEND_MBEDTLS_AES_CTR_ENABLED 1
|
|
#endif
|
|
|
|
// <q> NRF_CRYPTO_BACKEND_MBEDTLS_AES_CFB_ENABLED - Enable the AES CFB mode using mbed TLS.
|
|
|
|
#ifndef NRF_CRYPTO_BACKEND_MBEDTLS_AES_CFB_ENABLED
|
|
#define NRF_CRYPTO_BACKEND_MBEDTLS_AES_CFB_ENABLED 1
|
|
#endif
|
|
|
|
// <q> NRF_CRYPTO_BACKEND_MBEDTLS_AES_ECB_ENABLED - Enable the AES ECB mode using mbed TLS.
|
|
|
|
#ifndef NRF_CRYPTO_BACKEND_MBEDTLS_AES_ECB_ENABLED
|
|
#define NRF_CRYPTO_BACKEND_MBEDTLS_AES_ECB_ENABLED 1
|
|
#endif
|
|
|
|
// <q> NRF_CRYPTO_BACKEND_MBEDTLS_AES_CBC_MAC_ENABLED - Enable the AES CBC MAC mode using mbed TLS.
|
|
|
|
#ifndef NRF_CRYPTO_BACKEND_MBEDTLS_AES_CBC_MAC_ENABLED
|
|
#define NRF_CRYPTO_BACKEND_MBEDTLS_AES_CBC_MAC_ENABLED 1
|
|
#endif
|
|
|
|
// <q> NRF_CRYPTO_BACKEND_MBEDTLS_AES_CMAC_ENABLED - Enable the AES CMAC mode using mbed TLS.
|
|
|
|
#ifndef NRF_CRYPTO_BACKEND_MBEDTLS_AES_CMAC_ENABLED
|
|
#define NRF_CRYPTO_BACKEND_MBEDTLS_AES_CMAC_ENABLED 1
|
|
#endif
|
|
|
|
// <q> NRF_CRYPTO_BACKEND_MBEDTLS_AES_CCM_ENABLED - Enable the AES CCM mode using mbed TLS.
|
|
|
|
#ifndef NRF_CRYPTO_BACKEND_MBEDTLS_AES_CCM_ENABLED
|
|
#define NRF_CRYPTO_BACKEND_MBEDTLS_AES_CCM_ENABLED 1
|
|
#endif
|
|
|
|
// <q> NRF_CRYPTO_BACKEND_MBEDTLS_AES_GCM_ENABLED - Enable the AES GCM mode using mbed TLS.
|
|
|
|
#ifndef NRF_CRYPTO_BACKEND_MBEDTLS_AES_GCM_ENABLED
|
|
#define NRF_CRYPTO_BACKEND_MBEDTLS_AES_GCM_ENABLED 1
|
|
#endif
|
|
|
|
// <q> NRF_CRYPTO_BACKEND_MBEDTLS_ECC_SECP192R1_ENABLED - Enable secp192r1 (NIST 192-bit) curve
|
|
|
|
// <i> Enable this setting if you need secp192r1 (NIST 192-bit) support using MBEDTLS
|
|
|
|
#ifndef NRF_CRYPTO_BACKEND_MBEDTLS_ECC_SECP192R1_ENABLED
|
|
#define NRF_CRYPTO_BACKEND_MBEDTLS_ECC_SECP192R1_ENABLED 1
|
|
#endif
|
|
|
|
// <q> NRF_CRYPTO_BACKEND_MBEDTLS_ECC_SECP224R1_ENABLED - Enable secp224r1 (NIST 224-bit) curve
|
|
|
|
// <i> Enable this setting if you need secp224r1 (NIST 224-bit) support using MBEDTLS
|
|
|
|
#ifndef NRF_CRYPTO_BACKEND_MBEDTLS_ECC_SECP224R1_ENABLED
|
|
#define NRF_CRYPTO_BACKEND_MBEDTLS_ECC_SECP224R1_ENABLED 1
|
|
#endif
|
|
|
|
// <q> NRF_CRYPTO_BACKEND_MBEDTLS_ECC_SECP256R1_ENABLED - Enable secp256r1 (NIST 256-bit) curve
|
|
|
|
// <i> Enable this setting if you need secp256r1 (NIST 256-bit) support using MBEDTLS
|
|
|
|
#ifndef NRF_CRYPTO_BACKEND_MBEDTLS_ECC_SECP256R1_ENABLED
|
|
#define NRF_CRYPTO_BACKEND_MBEDTLS_ECC_SECP256R1_ENABLED 1
|
|
#endif
|
|
|
|
// <q> NRF_CRYPTO_BACKEND_MBEDTLS_ECC_SECP384R1_ENABLED - Enable secp384r1 (NIST 384-bit) curve
|
|
|
|
// <i> Enable this setting if you need secp384r1 (NIST 384-bit) support using MBEDTLS
|
|
|
|
#ifndef NRF_CRYPTO_BACKEND_MBEDTLS_ECC_SECP384R1_ENABLED
|
|
#define NRF_CRYPTO_BACKEND_MBEDTLS_ECC_SECP384R1_ENABLED 1
|
|
#endif
|
|
|
|
// <q> NRF_CRYPTO_BACKEND_MBEDTLS_ECC_SECP521R1_ENABLED - Enable secp521r1 (NIST 521-bit) curve
|
|
|
|
// <i> Enable this setting if you need secp521r1 (NIST 521-bit) support using MBEDTLS
|
|
|
|
#ifndef NRF_CRYPTO_BACKEND_MBEDTLS_ECC_SECP521R1_ENABLED
|
|
#define NRF_CRYPTO_BACKEND_MBEDTLS_ECC_SECP521R1_ENABLED 1
|
|
#endif
|
|
|
|
// <q> NRF_CRYPTO_BACKEND_MBEDTLS_ECC_SECP192K1_ENABLED - Enable secp192k1 (Koblitz 192-bit) curve
|
|
|
|
// <i> Enable this setting if you need secp192k1 (Koblitz 192-bit) support using MBEDTLS
|
|
|
|
#ifndef NRF_CRYPTO_BACKEND_MBEDTLS_ECC_SECP192K1_ENABLED
|
|
#define NRF_CRYPTO_BACKEND_MBEDTLS_ECC_SECP192K1_ENABLED 1
|
|
#endif
|
|
|
|
// <q> NRF_CRYPTO_BACKEND_MBEDTLS_ECC_SECP224K1_ENABLED - Enable secp224k1 (Koblitz 224-bit) curve
|
|
|
|
// <i> Enable this setting if you need secp224k1 (Koblitz 224-bit) support using MBEDTLS
|
|
|
|
#ifndef NRF_CRYPTO_BACKEND_MBEDTLS_ECC_SECP224K1_ENABLED
|
|
#define NRF_CRYPTO_BACKEND_MBEDTLS_ECC_SECP224K1_ENABLED 1
|
|
#endif
|
|
|
|
// <q> NRF_CRYPTO_BACKEND_MBEDTLS_ECC_SECP256K1_ENABLED - Enable secp256k1 (Koblitz 256-bit) curve
|
|
|
|
// <i> Enable this setting if you need secp256k1 (Koblitz 256-bit) support using MBEDTLS
|
|
|
|
#ifndef NRF_CRYPTO_BACKEND_MBEDTLS_ECC_SECP256K1_ENABLED
|
|
#define NRF_CRYPTO_BACKEND_MBEDTLS_ECC_SECP256K1_ENABLED 1
|
|
#endif
|
|
|
|
// <q> NRF_CRYPTO_BACKEND_MBEDTLS_ECC_BP256R1_ENABLED - Enable bp256r1 (Brainpool 256-bit) curve
|
|
|
|
// <i> Enable this setting if you need bp256r1 (Brainpool 256-bit) support using MBEDTLS
|
|
|
|
#ifndef NRF_CRYPTO_BACKEND_MBEDTLS_ECC_BP256R1_ENABLED
|
|
#define NRF_CRYPTO_BACKEND_MBEDTLS_ECC_BP256R1_ENABLED 1
|
|
#endif
|
|
|
|
// <q> NRF_CRYPTO_BACKEND_MBEDTLS_ECC_BP384R1_ENABLED - Enable bp384r1 (Brainpool 384-bit) curve
|
|
|
|
// <i> Enable this setting if you need bp384r1 (Brainpool 384-bit) support using MBEDTLS
|
|
|
|
#ifndef NRF_CRYPTO_BACKEND_MBEDTLS_ECC_BP384R1_ENABLED
|
|
#define NRF_CRYPTO_BACKEND_MBEDTLS_ECC_BP384R1_ENABLED 1
|
|
#endif
|
|
|
|
// <q> NRF_CRYPTO_BACKEND_MBEDTLS_ECC_BP512R1_ENABLED - Enable bp512r1 (Brainpool 512-bit) curve
|
|
|
|
// <i> Enable this setting if you need bp512r1 (Brainpool 512-bit) support using MBEDTLS
|
|
|
|
#ifndef NRF_CRYPTO_BACKEND_MBEDTLS_ECC_BP512R1_ENABLED
|
|
#define NRF_CRYPTO_BACKEND_MBEDTLS_ECC_BP512R1_ENABLED 1
|
|
#endif
|
|
|
|
// <q> NRF_CRYPTO_BACKEND_MBEDTLS_ECC_CURVE25519_ENABLED - Enable Curve25519 curve
|
|
|
|
// <i> Enable this setting if you need Curve25519 support using MBEDTLS
|
|
|
|
#ifndef NRF_CRYPTO_BACKEND_MBEDTLS_ECC_CURVE25519_ENABLED
|
|
#define NRF_CRYPTO_BACKEND_MBEDTLS_ECC_CURVE25519_ENABLED 1
|
|
#endif
|
|
|
|
// <q> NRF_CRYPTO_BACKEND_MBEDTLS_HASH_SHA256_ENABLED - Enable mbed TLS SHA-256 hash functionality.
|
|
|
|
// <i> mbed TLS backend implementation for SHA-256.
|
|
|
|
#ifndef NRF_CRYPTO_BACKEND_MBEDTLS_HASH_SHA256_ENABLED
|
|
#define NRF_CRYPTO_BACKEND_MBEDTLS_HASH_SHA256_ENABLED 1
|
|
#endif
|
|
|
|
// <q> NRF_CRYPTO_BACKEND_MBEDTLS_HASH_SHA512_ENABLED - Enable mbed TLS SHA-512 hash functionality.
|
|
|
|
// <i> mbed TLS backend implementation for SHA-512.
|
|
|
|
#ifndef NRF_CRYPTO_BACKEND_MBEDTLS_HASH_SHA512_ENABLED
|
|
#define NRF_CRYPTO_BACKEND_MBEDTLS_HASH_SHA512_ENABLED 1
|
|
#endif
|
|
|
|
// <q> NRF_CRYPTO_BACKEND_MBEDTLS_HMAC_SHA256_ENABLED - Enable mbed TLS HMAC using SHA-256.
|
|
|
|
// <i> mbed TLS backend implementation for HMAC using SHA-256.
|
|
|
|
#ifndef NRF_CRYPTO_BACKEND_MBEDTLS_HMAC_SHA256_ENABLED
|
|
#define NRF_CRYPTO_BACKEND_MBEDTLS_HMAC_SHA256_ENABLED 1
|
|
#endif
|
|
|
|
// <q> NRF_CRYPTO_BACKEND_MBEDTLS_HMAC_SHA512_ENABLED - Enable mbed TLS HMAC using SHA-512.
|
|
|
|
// <i> mbed TLS backend implementation for HMAC using SHA-512.
|
|
|
|
#ifndef NRF_CRYPTO_BACKEND_MBEDTLS_HMAC_SHA512_ENABLED
|
|
#define NRF_CRYPTO_BACKEND_MBEDTLS_HMAC_SHA512_ENABLED 1
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// <e> NRF_CRYPTO_BACKEND_MICRO_ECC_ENABLED - Enable the micro-ecc backend.
|
|
//==========================================================
|
|
#ifndef NRF_CRYPTO_BACKEND_MICRO_ECC_ENABLED
|
|
#define NRF_CRYPTO_BACKEND_MICRO_ECC_ENABLED 0
|
|
#endif
|
|
// <q> NRF_CRYPTO_BACKEND_MICRO_ECC_ECC_SECP192R1_ENABLED - Enable secp192r1 (NIST 192-bit) curve
|
|
|
|
// <i> Enable this setting if you need secp192r1 (NIST 192-bit) support using micro-ecc
|
|
|
|
#ifndef NRF_CRYPTO_BACKEND_MICRO_ECC_ECC_SECP192R1_ENABLED
|
|
#define NRF_CRYPTO_BACKEND_MICRO_ECC_ECC_SECP192R1_ENABLED 1
|
|
#endif
|
|
|
|
// <q> NRF_CRYPTO_BACKEND_MICRO_ECC_ECC_SECP224R1_ENABLED - Enable secp224r1 (NIST 224-bit) curve
|
|
|
|
// <i> Enable this setting if you need secp224r1 (NIST 224-bit) support using micro-ecc
|
|
|
|
#ifndef NRF_CRYPTO_BACKEND_MICRO_ECC_ECC_SECP224R1_ENABLED
|
|
#define NRF_CRYPTO_BACKEND_MICRO_ECC_ECC_SECP224R1_ENABLED 1
|
|
#endif
|
|
|
|
// <q> NRF_CRYPTO_BACKEND_MICRO_ECC_ECC_SECP256R1_ENABLED - Enable secp256r1 (NIST 256-bit) curve
|
|
|
|
// <i> Enable this setting if you need secp256r1 (NIST 256-bit) support using micro-ecc
|
|
|
|
#ifndef NRF_CRYPTO_BACKEND_MICRO_ECC_ECC_SECP256R1_ENABLED
|
|
#define NRF_CRYPTO_BACKEND_MICRO_ECC_ECC_SECP256R1_ENABLED 1
|
|
#endif
|
|
|
|
// <q> NRF_CRYPTO_BACKEND_MICRO_ECC_ECC_SECP256K1_ENABLED - Enable secp256k1 (Koblitz 256-bit) curve
|
|
|
|
// <i> Enable this setting if you need secp256k1 (Koblitz 256-bit) support using micro-ecc
|
|
|
|
#ifndef NRF_CRYPTO_BACKEND_MICRO_ECC_ECC_SECP256K1_ENABLED
|
|
#define NRF_CRYPTO_BACKEND_MICRO_ECC_ECC_SECP256K1_ENABLED 1
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// <e> NRF_CRYPTO_BACKEND_NRF_HW_RNG_ENABLED - Enable the nRF HW RNG backend.
|
|
|
|
// <i> The nRF HW backend provide access to RNG peripheral in nRF5x devices.
|
|
//==========================================================
|
|
#ifndef NRF_CRYPTO_BACKEND_NRF_HW_RNG_ENABLED
|
|
#define NRF_CRYPTO_BACKEND_NRF_HW_RNG_ENABLED 0
|
|
#endif
|
|
// <q> NRF_CRYPTO_BACKEND_NRF_HW_RNG_MBEDTLS_CTR_DRBG_ENABLED - Enable mbed TLS CTR-DRBG algorithm.
|
|
|
|
// <i> Enable mbed TLS CTR-DRBG standardized by NIST (NIST SP 800-90A Rev. 1). The nRF HW RNG is used as an entropy source for seeding.
|
|
|
|
#ifndef NRF_CRYPTO_BACKEND_NRF_HW_RNG_MBEDTLS_CTR_DRBG_ENABLED
|
|
#define NRF_CRYPTO_BACKEND_NRF_HW_RNG_MBEDTLS_CTR_DRBG_ENABLED 1
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// <e> NRF_CRYPTO_BACKEND_NRF_SW_ENABLED - Enable the legacy nRFx sw for crypto.
|
|
|
|
// <i> The nRF SW cryptography backend (only used in bootloader context).
|
|
//==========================================================
|
|
#ifndef NRF_CRYPTO_BACKEND_NRF_SW_ENABLED
|
|
#define NRF_CRYPTO_BACKEND_NRF_SW_ENABLED 0
|
|
#endif
|
|
// <q> NRF_CRYPTO_BACKEND_NRF_SW_HASH_SHA256_ENABLED - nRF SW hash backend support for SHA-256
|
|
|
|
// <i> The nRF SW backend provide access to nRF SDK legacy hash implementation of SHA-256.
|
|
|
|
#ifndef NRF_CRYPTO_BACKEND_NRF_SW_HASH_SHA256_ENABLED
|
|
#define NRF_CRYPTO_BACKEND_NRF_SW_HASH_SHA256_ENABLED 1
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// <e> NRF_CRYPTO_BACKEND_OBERON_ENABLED - Enable the Oberon backend
|
|
|
|
// <i> The Oberon backend
|
|
//==========================================================
|
|
#ifndef NRF_CRYPTO_BACKEND_OBERON_ENABLED
|
|
#define NRF_CRYPTO_BACKEND_OBERON_ENABLED 0
|
|
#endif
|
|
// <q> NRF_CRYPTO_BACKEND_OBERON_CHACHA_POLY_ENABLED - Enable the CHACHA-POLY mode using Oberon.
|
|
|
|
#ifndef NRF_CRYPTO_BACKEND_OBERON_CHACHA_POLY_ENABLED
|
|
#define NRF_CRYPTO_BACKEND_OBERON_CHACHA_POLY_ENABLED 1
|
|
#endif
|
|
|
|
// <q> NRF_CRYPTO_BACKEND_OBERON_ECC_SECP256R1_ENABLED - Enable secp256r1 curve
|
|
|
|
// <i> Enable this setting if you need secp256r1 curve support using Oberon library
|
|
|
|
#ifndef NRF_CRYPTO_BACKEND_OBERON_ECC_SECP256R1_ENABLED
|
|
#define NRF_CRYPTO_BACKEND_OBERON_ECC_SECP256R1_ENABLED 1
|
|
#endif
|
|
|
|
// <q> NRF_CRYPTO_BACKEND_OBERON_ECC_CURVE25519_ENABLED - Enable Curve25519 ECDH
|
|
|
|
// <i> Enable this setting if you need Curve25519 ECDH support using Oberon library
|
|
|
|
#ifndef NRF_CRYPTO_BACKEND_OBERON_ECC_CURVE25519_ENABLED
|
|
#define NRF_CRYPTO_BACKEND_OBERON_ECC_CURVE25519_ENABLED 1
|
|
#endif
|
|
|
|
// <q> NRF_CRYPTO_BACKEND_OBERON_ECC_ED25519_ENABLED - Enable Ed25519 signature scheme
|
|
|
|
// <i> Enable this setting if you need Ed25519 support using Oberon library
|
|
|
|
#ifndef NRF_CRYPTO_BACKEND_OBERON_ECC_ED25519_ENABLED
|
|
#define NRF_CRYPTO_BACKEND_OBERON_ECC_ED25519_ENABLED 1
|
|
#endif
|
|
|
|
// <q> NRF_CRYPTO_BACKEND_OBERON_HASH_SHA256_ENABLED - Oberon SHA-256 hash functionality
|
|
|
|
// <i> Oberon backend implementation for SHA-256.
|
|
|
|
#ifndef NRF_CRYPTO_BACKEND_OBERON_HASH_SHA256_ENABLED
|
|
#define NRF_CRYPTO_BACKEND_OBERON_HASH_SHA256_ENABLED 1
|
|
#endif
|
|
|
|
// <q> NRF_CRYPTO_BACKEND_OBERON_HASH_SHA512_ENABLED - Oberon SHA-512 hash functionality
|
|
|
|
// <i> Oberon backend implementation for SHA-512.
|
|
|
|
#ifndef NRF_CRYPTO_BACKEND_OBERON_HASH_SHA512_ENABLED
|
|
#define NRF_CRYPTO_BACKEND_OBERON_HASH_SHA512_ENABLED 1
|
|
#endif
|
|
|
|
// <q> NRF_CRYPTO_BACKEND_OBERON_HMAC_SHA256_ENABLED - Oberon HMAC using SHA-256
|
|
|
|
// <i> Oberon backend implementation for HMAC using SHA-256.
|
|
|
|
#ifndef NRF_CRYPTO_BACKEND_OBERON_HMAC_SHA256_ENABLED
|
|
#define NRF_CRYPTO_BACKEND_OBERON_HMAC_SHA256_ENABLED 1
|
|
#endif
|
|
|
|
// <q> NRF_CRYPTO_BACKEND_OBERON_HMAC_SHA512_ENABLED - Oberon HMAC using SHA-512
|
|
|
|
// <i> Oberon backend implementation for HMAC using SHA-512.
|
|
|
|
#ifndef NRF_CRYPTO_BACKEND_OBERON_HMAC_SHA512_ENABLED
|
|
#define NRF_CRYPTO_BACKEND_OBERON_HMAC_SHA512_ENABLED 1
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// <e> NRF_CRYPTO_BACKEND_OPTIGA_ENABLED - Enable the nrf_crypto Optiga Trust X backend.
|
|
|
|
// <i> Enables the nrf_crypto backend for Optiga Trust X devices.
|
|
//==========================================================
|
|
#ifndef NRF_CRYPTO_BACKEND_OPTIGA_ENABLED
|
|
#define NRF_CRYPTO_BACKEND_OPTIGA_ENABLED 0
|
|
#endif
|
|
// <q> NRF_CRYPTO_BACKEND_OPTIGA_RNG_ENABLED - Optiga backend support for RNG
|
|
|
|
// <i> The Optiga backend provide external chip RNG.
|
|
|
|
#ifndef NRF_CRYPTO_BACKEND_OPTIGA_RNG_ENABLED
|
|
#define NRF_CRYPTO_BACKEND_OPTIGA_RNG_ENABLED 0
|
|
#endif
|
|
|
|
// <q> NRF_CRYPTO_BACKEND_OPTIGA_ECC_SECP256R1_ENABLED - Optiga backend support for ECC secp256r1
|
|
|
|
// <i> The Optiga backend provide external chip ECC using secp256r1.
|
|
|
|
#ifndef NRF_CRYPTO_BACKEND_OPTIGA_ECC_SECP256R1_ENABLED
|
|
#define NRF_CRYPTO_BACKEND_OPTIGA_ECC_SECP256R1_ENABLED 1
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// <q> NRF_CRYPTO_CURVE25519_BIG_ENDIAN_ENABLED - Big-endian byte order in raw Curve25519 data
|
|
|
|
// <i> Enable big-endian byte order in Curve25519 API, if set to 1. Use little-endian, if set to 0.
|
|
|
|
#ifndef NRF_CRYPTO_CURVE25519_BIG_ENDIAN_ENABLED
|
|
#define NRF_CRYPTO_CURVE25519_BIG_ENDIAN_ENABLED 0
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// </h>
|
|
//==========================================================
|
|
|
|
// <h> nRF_DFU
|
|
|
|
//==========================================================
|
|
// <h> ble_dfu - Device Firmware Update
|
|
|
|
//==========================================================
|
|
// <q> BLE_DFU_ENABLED - Enable DFU Service.
|
|
|
|
#ifndef BLE_DFU_ENABLED
|
|
#define BLE_DFU_ENABLED 0
|
|
#endif
|
|
|
|
// <q> NRF_DFU_BLE_BUTTONLESS_SUPPORTS_BONDS - Buttonless DFU supports bonds.
|
|
|
|
#ifndef NRF_DFU_BLE_BUTTONLESS_SUPPORTS_BONDS
|
|
#define NRF_DFU_BLE_BUTTONLESS_SUPPORTS_BONDS 0
|
|
#endif
|
|
|
|
// </h>
|
|
//==========================================================
|
|
|
|
// </h>
|
|
//==========================================================
|
|
|
|
// <h> nRF_Drivers
|
|
|
|
//==========================================================
|
|
// <e> COMP_ENABLED - nrf_drv_comp - COMP peripheral driver - legacy layer
|
|
//==========================================================
|
|
#ifndef COMP_ENABLED
|
|
#define COMP_ENABLED 0
|
|
#endif
|
|
// <o> COMP_CONFIG_REF - Reference voltage
|
|
|
|
// <0=> Internal 1.2V
|
|
// <1=> Internal 1.8V
|
|
// <2=> Internal 2.4V
|
|
// <4=> VDD
|
|
// <7=> ARef
|
|
|
|
#ifndef COMP_CONFIG_REF
|
|
#define COMP_CONFIG_REF 1
|
|
#endif
|
|
|
|
// <o> COMP_CONFIG_MAIN_MODE - Main mode
|
|
|
|
// <0=> Single ended
|
|
// <1=> Differential
|
|
|
|
#ifndef COMP_CONFIG_MAIN_MODE
|
|
#define COMP_CONFIG_MAIN_MODE 0
|
|
#endif
|
|
|
|
// <o> COMP_CONFIG_SPEED_MODE - Speed mode
|
|
|
|
// <0=> Low power
|
|
// <1=> Normal
|
|
// <2=> High speed
|
|
|
|
#ifndef COMP_CONFIG_SPEED_MODE
|
|
#define COMP_CONFIG_SPEED_MODE 2
|
|
#endif
|
|
|
|
// <o> COMP_CONFIG_HYST - Hystheresis
|
|
|
|
// <0=> No
|
|
// <1=> 50mV
|
|
|
|
#ifndef COMP_CONFIG_HYST
|
|
#define COMP_CONFIG_HYST 0
|
|
#endif
|
|
|
|
// <o> COMP_CONFIG_ISOURCE - Current Source
|
|
|
|
// <0=> Off
|
|
// <1=> 2.5 uA
|
|
// <2=> 5 uA
|
|
// <3=> 10 uA
|
|
|
|
#ifndef COMP_CONFIG_ISOURCE
|
|
#define COMP_CONFIG_ISOURCE 0
|
|
#endif
|
|
|
|
// <o> COMP_CONFIG_INPUT - Analog input
|
|
|
|
// <0=> 0
|
|
// <1=> 1
|
|
// <2=> 2
|
|
// <3=> 3
|
|
// <4=> 4
|
|
// <5=> 5
|
|
// <6=> 6
|
|
// <7=> 7
|
|
|
|
#ifndef COMP_CONFIG_INPUT
|
|
#define COMP_CONFIG_INPUT 0
|
|
#endif
|
|
|
|
// <o> COMP_CONFIG_IRQ_PRIORITY - Interrupt priority
|
|
|
|
// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
|
|
// <0=> 0 (highest)
|
|
// <1=> 1
|
|
// <2=> 2
|
|
// <3=> 3
|
|
// <4=> 4
|
|
// <5=> 5
|
|
// <6=> 6
|
|
// <7=> 7
|
|
|
|
#ifndef COMP_CONFIG_IRQ_PRIORITY
|
|
#define COMP_CONFIG_IRQ_PRIORITY 6
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// <q> EGU_ENABLED - nrf_drv_swi - SWI(EGU) peripheral driver - legacy layer
|
|
|
|
#ifndef EGU_ENABLED
|
|
#define EGU_ENABLED 0
|
|
#endif
|
|
|
|
// <e> GPIOTE_ENABLED - nrf_drv_gpiote - GPIOTE peripheral driver - legacy layer
|
|
//==========================================================
|
|
#ifndef GPIOTE_ENABLED
|
|
#define GPIOTE_ENABLED 1
|
|
#endif
|
|
|
|
#ifndef GPIOTE_LOG_ENABLED
|
|
#define GPIOTE_LOG_ENABLED 0
|
|
#endif
|
|
|
|
#ifndef NRFX_GPIOTE_LOG_ENABLED
|
|
#define NRFX_GPIOTE_LOG_ENABLED 0
|
|
#endif
|
|
|
|
// <o> GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS - Number of lower power input pins
|
|
#ifndef GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS
|
|
#define GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS 4
|
|
#endif
|
|
|
|
// <o> GPIOTE_CONFIG_IRQ_PRIORITY - Interrupt priority
|
|
|
|
// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
|
|
// <0=> 0 (highest)
|
|
// <1=> 1
|
|
// <2=> 2
|
|
// <3=> 3
|
|
// <4=> 4
|
|
// <5=> 5
|
|
// <6=> 6
|
|
// <7=> 7
|
|
|
|
#ifndef GPIOTE_CONFIG_IRQ_PRIORITY
|
|
#define GPIOTE_CONFIG_IRQ_PRIORITY 6
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// <e> I2S_ENABLED - nrf_drv_i2s - I2S peripheral driver - legacy layer
|
|
//==========================================================
|
|
#ifndef I2S_ENABLED
|
|
#define I2S_ENABLED 0
|
|
#endif
|
|
// <o> I2S_CONFIG_SCK_PIN - SCK pin <0-31>
|
|
|
|
#ifndef I2S_CONFIG_SCK_PIN
|
|
#define I2S_CONFIG_SCK_PIN 31
|
|
#endif
|
|
|
|
// <o> I2S_CONFIG_LRCK_PIN - LRCK pin <1-31>
|
|
|
|
#ifndef I2S_CONFIG_LRCK_PIN
|
|
#define I2S_CONFIG_LRCK_PIN 30
|
|
#endif
|
|
|
|
// <o> I2S_CONFIG_MCK_PIN - MCK pin
|
|
#ifndef I2S_CONFIG_MCK_PIN
|
|
#define I2S_CONFIG_MCK_PIN 255
|
|
#endif
|
|
|
|
// <o> I2S_CONFIG_SDOUT_PIN - SDOUT pin <0-31>
|
|
|
|
#ifndef I2S_CONFIG_SDOUT_PIN
|
|
#define I2S_CONFIG_SDOUT_PIN 29
|
|
#endif
|
|
|
|
// <o> I2S_CONFIG_SDIN_PIN - SDIN pin <0-31>
|
|
|
|
#ifndef I2S_CONFIG_SDIN_PIN
|
|
#define I2S_CONFIG_SDIN_PIN 28
|
|
#endif
|
|
|
|
// <o> I2S_CONFIG_MASTER - Mode
|
|
|
|
// <0=> Master
|
|
// <1=> Slave
|
|
|
|
#ifndef I2S_CONFIG_MASTER
|
|
#define I2S_CONFIG_MASTER 0
|
|
#endif
|
|
|
|
// <o> I2S_CONFIG_FORMAT - Format
|
|
|
|
// <0=> I2S
|
|
// <1=> Aligned
|
|
|
|
#ifndef I2S_CONFIG_FORMAT
|
|
#define I2S_CONFIG_FORMAT 0
|
|
#endif
|
|
|
|
// <o> I2S_CONFIG_ALIGN - Alignment
|
|
|
|
// <0=> Left
|
|
// <1=> Right
|
|
|
|
#ifndef I2S_CONFIG_ALIGN
|
|
#define I2S_CONFIG_ALIGN 0
|
|
#endif
|
|
|
|
// <o> I2S_CONFIG_SWIDTH - Sample width (bits)
|
|
|
|
// <0=> 8
|
|
// <1=> 16
|
|
// <2=> 24
|
|
|
|
#ifndef I2S_CONFIG_SWIDTH
|
|
#define I2S_CONFIG_SWIDTH 1
|
|
#endif
|
|
|
|
// <o> I2S_CONFIG_CHANNELS - Channels
|
|
|
|
// <0=> Stereo
|
|
// <1=> Left
|
|
// <2=> Right
|
|
|
|
#ifndef I2S_CONFIG_CHANNELS
|
|
#define I2S_CONFIG_CHANNELS 1
|
|
#endif
|
|
|
|
// <o> I2S_CONFIG_MCK_SETUP - MCK behavior
|
|
|
|
// <0=> Disabled
|
|
// <2147483648=> 32MHz/2
|
|
// <1342177280=> 32MHz/3
|
|
// <1073741824=> 32MHz/4
|
|
// <805306368=> 32MHz/5
|
|
// <671088640=> 32MHz/6
|
|
// <536870912=> 32MHz/8
|
|
// <402653184=> 32MHz/10
|
|
// <369098752=> 32MHz/11
|
|
// <285212672=> 32MHz/15
|
|
// <268435456=> 32MHz/16
|
|
// <201326592=> 32MHz/21
|
|
// <184549376=> 32MHz/23
|
|
// <142606336=> 32MHz/30
|
|
// <138412032=> 32MHz/31
|
|
// <134217728=> 32MHz/32
|
|
// <100663296=> 32MHz/42
|
|
// <68157440=> 32MHz/63
|
|
// <34340864=> 32MHz/125
|
|
|
|
#ifndef I2S_CONFIG_MCK_SETUP
|
|
#define I2S_CONFIG_MCK_SETUP 536870912
|
|
#endif
|
|
|
|
// <o> I2S_CONFIG_RATIO - MCK/LRCK ratio
|
|
|
|
// <0=> 32x
|
|
// <1=> 48x
|
|
// <2=> 64x
|
|
// <3=> 96x
|
|
// <4=> 128x
|
|
// <5=> 192x
|
|
// <6=> 256x
|
|
// <7=> 384x
|
|
// <8=> 512x
|
|
|
|
#ifndef I2S_CONFIG_RATIO
|
|
#define I2S_CONFIG_RATIO 2000
|
|
#endif
|
|
|
|
// <o> I2S_CONFIG_IRQ_PRIORITY - Interrupt priority
|
|
|
|
// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
|
|
// <0=> 0 (highest)
|
|
// <1=> 1
|
|
// <2=> 2
|
|
// <3=> 3
|
|
// <4=> 4
|
|
// <5=> 5
|
|
// <6=> 6
|
|
// <7=> 7
|
|
|
|
#ifndef I2S_CONFIG_IRQ_PRIORITY
|
|
#define I2S_CONFIG_IRQ_PRIORITY 6
|
|
#endif
|
|
|
|
// <e> I2S_CONFIG_LOG_ENABLED - Enables logging in the module.
|
|
//==========================================================
|
|
#ifndef I2S_CONFIG_LOG_ENABLED
|
|
#define I2S_CONFIG_LOG_ENABLED 0
|
|
#endif
|
|
// <o> I2S_CONFIG_LOG_LEVEL - Default Severity level
|
|
|
|
// <0=> Off
|
|
// <1=> Error
|
|
// <2=> Warning
|
|
// <3=> Info
|
|
// <4=> Debug
|
|
|
|
#ifndef I2S_CONFIG_LOG_LEVEL
|
|
#define I2S_CONFIG_LOG_LEVEL 3
|
|
#endif
|
|
|
|
// <o> I2S_CONFIG_INFO_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef I2S_CONFIG_INFO_COLOR
|
|
#define I2S_CONFIG_INFO_COLOR 0
|
|
#endif
|
|
|
|
// <o> I2S_CONFIG_DEBUG_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef I2S_CONFIG_DEBUG_COLOR
|
|
#define I2S_CONFIG_DEBUG_COLOR 0
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// </e>
|
|
|
|
// <e> LPCOMP_ENABLED - nrf_drv_lpcomp - LPCOMP peripheral driver - legacy layer
|
|
//==========================================================
|
|
#ifndef LPCOMP_ENABLED
|
|
#define LPCOMP_ENABLED 0
|
|
#endif
|
|
// <o> LPCOMP_CONFIG_REFERENCE - Reference voltage
|
|
|
|
// <0=> Supply 1/8
|
|
// <1=> Supply 2/8
|
|
// <2=> Supply 3/8
|
|
// <3=> Supply 4/8
|
|
// <4=> Supply 5/8
|
|
// <5=> Supply 6/8
|
|
// <6=> Supply 7/8
|
|
// <8=> Supply 1/16 (nRF52)
|
|
// <9=> Supply 3/16 (nRF52)
|
|
// <10=> Supply 5/16 (nRF52)
|
|
// <11=> Supply 7/16 (nRF52)
|
|
// <12=> Supply 9/16 (nRF52)
|
|
// <13=> Supply 11/16 (nRF52)
|
|
// <14=> Supply 13/16 (nRF52)
|
|
// <15=> Supply 15/16 (nRF52)
|
|
// <7=> External Ref 0
|
|
// <65543=> External Ref 1
|
|
|
|
#ifndef LPCOMP_CONFIG_REFERENCE
|
|
#define LPCOMP_CONFIG_REFERENCE 3
|
|
#endif
|
|
|
|
// <o> LPCOMP_CONFIG_DETECTION - Detection
|
|
|
|
// <0=> Crossing
|
|
// <1=> Up
|
|
// <2=> Down
|
|
|
|
#ifndef LPCOMP_CONFIG_DETECTION
|
|
#define LPCOMP_CONFIG_DETECTION 2
|
|
#endif
|
|
|
|
// <o> LPCOMP_CONFIG_INPUT - Analog input
|
|
|
|
// <0=> 0
|
|
// <1=> 1
|
|
// <2=> 2
|
|
// <3=> 3
|
|
// <4=> 4
|
|
// <5=> 5
|
|
// <6=> 6
|
|
// <7=> 7
|
|
|
|
#ifndef LPCOMP_CONFIG_INPUT
|
|
#define LPCOMP_CONFIG_INPUT 0
|
|
#endif
|
|
|
|
// <q> LPCOMP_CONFIG_HYST - Hysteresis
|
|
|
|
#ifndef LPCOMP_CONFIG_HYST
|
|
#define LPCOMP_CONFIG_HYST 0
|
|
#endif
|
|
|
|
// <o> LPCOMP_CONFIG_IRQ_PRIORITY - Interrupt priority
|
|
|
|
// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
|
|
// <0=> 0 (highest)
|
|
// <1=> 1
|
|
// <2=> 2
|
|
// <3=> 3
|
|
// <4=> 4
|
|
// <5=> 5
|
|
// <6=> 6
|
|
// <7=> 7
|
|
|
|
#ifndef LPCOMP_CONFIG_IRQ_PRIORITY
|
|
#define LPCOMP_CONFIG_IRQ_PRIORITY 6
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// <e> NRFX_CLOCK_ENABLED - nrfx_clock - CLOCK peripheral driver
|
|
//==========================================================
|
|
#ifndef NRFX_CLOCK_ENABLED
|
|
#define NRFX_CLOCK_ENABLED 1
|
|
#endif
|
|
// <o> NRFX_CLOCK_CONFIG_LF_SRC - LF Clock Source
|
|
|
|
// <0=> RC
|
|
// <1=> XTAL
|
|
// <2=> Synth
|
|
// <131073=> External Low Swing
|
|
// <196609=> External Full Swing
|
|
|
|
#ifndef NRFX_CLOCK_CONFIG_LF_SRC
|
|
#define NRFX_CLOCK_CONFIG_LF_SRC 1
|
|
#endif
|
|
|
|
// <o> NRFX_CLOCK_CONFIG_IRQ_PRIORITY - Interrupt priority
|
|
|
|
// <0=> 0 (highest)
|
|
// <1=> 1
|
|
// <2=> 2
|
|
// <3=> 3
|
|
// <4=> 4
|
|
// <5=> 5
|
|
// <6=> 6
|
|
// <7=> 7
|
|
|
|
#ifndef NRFX_CLOCK_CONFIG_IRQ_PRIORITY
|
|
#define NRFX_CLOCK_CONFIG_IRQ_PRIORITY 6
|
|
#endif
|
|
|
|
// <e> NRFX_CLOCK_CONFIG_LOG_ENABLED - Enables logging in the module.
|
|
//==========================================================
|
|
#ifndef NRFX_CLOCK_CONFIG_LOG_ENABLED
|
|
#define NRFX_CLOCK_CONFIG_LOG_ENABLED 0
|
|
#endif
|
|
// <o> NRFX_CLOCK_CONFIG_LOG_LEVEL - Default Severity level
|
|
|
|
// <0=> Off
|
|
// <1=> Error
|
|
// <2=> Warning
|
|
// <3=> Info
|
|
// <4=> Debug
|
|
|
|
#ifndef NRFX_CLOCK_CONFIG_LOG_LEVEL
|
|
#define NRFX_CLOCK_CONFIG_LOG_LEVEL 3
|
|
#endif
|
|
|
|
// <o> NRFX_CLOCK_CONFIG_INFO_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef NRFX_CLOCK_CONFIG_INFO_COLOR
|
|
#define NRFX_CLOCK_CONFIG_INFO_COLOR 0
|
|
#endif
|
|
|
|
// <o> NRFX_CLOCK_CONFIG_DEBUG_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef NRFX_CLOCK_CONFIG_DEBUG_COLOR
|
|
#define NRFX_CLOCK_CONFIG_DEBUG_COLOR 0
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// </e>
|
|
|
|
// <e> NRFX_COMP_ENABLED - nrfx_comp - COMP peripheral driver
|
|
//==========================================================
|
|
#ifndef NRFX_COMP_ENABLED
|
|
#define NRFX_COMP_ENABLED 0
|
|
#endif
|
|
// <o> NRFX_COMP_CONFIG_REF - Reference voltage
|
|
|
|
// <0=> Internal 1.2V
|
|
// <1=> Internal 1.8V
|
|
// <2=> Internal 2.4V
|
|
// <4=> VDD
|
|
// <7=> ARef
|
|
|
|
#ifndef NRFX_COMP_CONFIG_REF
|
|
#define NRFX_COMP_CONFIG_REF 1
|
|
#endif
|
|
|
|
// <o> NRFX_COMP_CONFIG_MAIN_MODE - Main mode
|
|
|
|
// <0=> Single ended
|
|
// <1=> Differential
|
|
|
|
#ifndef NRFX_COMP_CONFIG_MAIN_MODE
|
|
#define NRFX_COMP_CONFIG_MAIN_MODE 0
|
|
#endif
|
|
|
|
// <o> NRFX_COMP_CONFIG_SPEED_MODE - Speed mode
|
|
|
|
// <0=> Low power
|
|
// <1=> Normal
|
|
// <2=> High speed
|
|
|
|
#ifndef NRFX_COMP_CONFIG_SPEED_MODE
|
|
#define NRFX_COMP_CONFIG_SPEED_MODE 2
|
|
#endif
|
|
|
|
// <o> NRFX_COMP_CONFIG_HYST - Hystheresis
|
|
|
|
// <0=> No
|
|
// <1=> 50mV
|
|
|
|
#ifndef NRFX_COMP_CONFIG_HYST
|
|
#define NRFX_COMP_CONFIG_HYST 0
|
|
#endif
|
|
|
|
// <o> NRFX_COMP_CONFIG_ISOURCE - Current Source
|
|
|
|
// <0=> Off
|
|
// <1=> 2.5 uA
|
|
// <2=> 5 uA
|
|
// <3=> 10 uA
|
|
|
|
#ifndef NRFX_COMP_CONFIG_ISOURCE
|
|
#define NRFX_COMP_CONFIG_ISOURCE 0
|
|
#endif
|
|
|
|
// <o> NRFX_COMP_CONFIG_INPUT - Analog input
|
|
|
|
// <0=> 0
|
|
// <1=> 1
|
|
// <2=> 2
|
|
// <3=> 3
|
|
// <4=> 4
|
|
// <5=> 5
|
|
// <6=> 6
|
|
// <7=> 7
|
|
|
|
#ifndef NRFX_COMP_CONFIG_INPUT
|
|
#define NRFX_COMP_CONFIG_INPUT 0
|
|
#endif
|
|
|
|
// <o> NRFX_COMP_CONFIG_IRQ_PRIORITY - Interrupt priority
|
|
|
|
// <0=> 0 (highest)
|
|
// <1=> 1
|
|
// <2=> 2
|
|
// <3=> 3
|
|
// <4=> 4
|
|
// <5=> 5
|
|
// <6=> 6
|
|
// <7=> 7
|
|
|
|
#ifndef NRFX_COMP_CONFIG_IRQ_PRIORITY
|
|
#define NRFX_COMP_CONFIG_IRQ_PRIORITY 6
|
|
#endif
|
|
|
|
// <e> NRFX_COMP_CONFIG_LOG_ENABLED - Enables logging in the module.
|
|
//==========================================================
|
|
#ifndef NRFX_COMP_CONFIG_LOG_ENABLED
|
|
#define NRFX_COMP_CONFIG_LOG_ENABLED 0
|
|
#endif
|
|
// <o> NRFX_COMP_CONFIG_LOG_LEVEL - Default Severity level
|
|
|
|
// <0=> Off
|
|
// <1=> Error
|
|
// <2=> Warning
|
|
// <3=> Info
|
|
// <4=> Debug
|
|
|
|
#ifndef NRFX_COMP_CONFIG_LOG_LEVEL
|
|
#define NRFX_COMP_CONFIG_LOG_LEVEL 3
|
|
#endif
|
|
|
|
// <o> NRFX_COMP_CONFIG_INFO_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef NRFX_COMP_CONFIG_INFO_COLOR
|
|
#define NRFX_COMP_CONFIG_INFO_COLOR 0
|
|
#endif
|
|
|
|
// <o> NRFX_COMP_CONFIG_DEBUG_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef NRFX_COMP_CONFIG_DEBUG_COLOR
|
|
#define NRFX_COMP_CONFIG_DEBUG_COLOR 0
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// </e>
|
|
|
|
// <e> NRFX_GPIOTE_ENABLED - nrfx_gpiote - GPIOTE peripheral driver
|
|
//==========================================================
|
|
#ifndef NRFX_GPIOTE_ENABLED
|
|
#define NRFX_GPIOTE_ENABLED 1
|
|
#endif
|
|
// <o> NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS - Number of lower power input pins
|
|
#ifndef NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS
|
|
#define NRFX_GPIOTE_CONFIG_NUM_OF_LOW_POWER_EVENTS 4
|
|
#endif
|
|
|
|
// <o> NRFX_GPIOTE_CONFIG_IRQ_PRIORITY - Interrupt priority
|
|
|
|
// <0=> 0 (highest)
|
|
// <1=> 1
|
|
// <2=> 2
|
|
// <3=> 3
|
|
// <4=> 4
|
|
// <5=> 5
|
|
// <6=> 6
|
|
// <7=> 7
|
|
|
|
#ifndef NRFX_GPIOTE_CONFIG_IRQ_PRIORITY
|
|
#define NRFX_GPIOTE_CONFIG_IRQ_PRIORITY 6
|
|
#endif
|
|
|
|
// <e> NRFX_GPIOTE_CONFIG_LOG_ENABLED - Enables logging in the module.
|
|
//==========================================================
|
|
#ifndef NRFX_GPIOTE_CONFIG_LOG_ENABLED
|
|
#define NRFX_GPIOTE_CONFIG_LOG_ENABLED 0
|
|
#endif
|
|
// <o> NRFX_GPIOTE_CONFIG_LOG_LEVEL - Default Severity level
|
|
|
|
// <0=> Off
|
|
// <1=> Error
|
|
// <2=> Warning
|
|
// <3=> Info
|
|
// <4=> Debug
|
|
|
|
#ifndef NRFX_GPIOTE_CONFIG_LOG_LEVEL
|
|
#define NRFX_GPIOTE_CONFIG_LOG_LEVEL 3
|
|
#endif
|
|
|
|
// <o> NRFX_GPIOTE_CONFIG_INFO_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef NRFX_GPIOTE_CONFIG_INFO_COLOR
|
|
#define NRFX_GPIOTE_CONFIG_INFO_COLOR 0
|
|
#endif
|
|
|
|
// <o> NRFX_GPIOTE_CONFIG_DEBUG_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef NRFX_GPIOTE_CONFIG_DEBUG_COLOR
|
|
#define NRFX_GPIOTE_CONFIG_DEBUG_COLOR 0
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// </e>
|
|
|
|
// <e> NRFX_I2S_ENABLED - nrfx_i2s - I2S peripheral driver
|
|
//==========================================================
|
|
#ifndef NRFX_I2S_ENABLED
|
|
#define NRFX_I2S_ENABLED 0
|
|
#endif
|
|
// <o> NRFX_I2S_CONFIG_SCK_PIN - SCK pin <0-31>
|
|
|
|
#ifndef NRFX_I2S_CONFIG_SCK_PIN
|
|
#define NRFX_I2S_CONFIG_SCK_PIN 31
|
|
#endif
|
|
|
|
// <o> NRFX_I2S_CONFIG_LRCK_PIN - LRCK pin <1-31>
|
|
|
|
#ifndef NRFX_I2S_CONFIG_LRCK_PIN
|
|
#define NRFX_I2S_CONFIG_LRCK_PIN 30
|
|
#endif
|
|
|
|
// <o> NRFX_I2S_CONFIG_MCK_PIN - MCK pin
|
|
#ifndef NRFX_I2S_CONFIG_MCK_PIN
|
|
#define NRFX_I2S_CONFIG_MCK_PIN 255
|
|
#endif
|
|
|
|
// <o> NRFX_I2S_CONFIG_SDOUT_PIN - SDOUT pin <0-31>
|
|
|
|
#ifndef NRFX_I2S_CONFIG_SDOUT_PIN
|
|
#define NRFX_I2S_CONFIG_SDOUT_PIN 29
|
|
#endif
|
|
|
|
// <o> NRFX_I2S_CONFIG_SDIN_PIN - SDIN pin <0-31>
|
|
|
|
#ifndef NRFX_I2S_CONFIG_SDIN_PIN
|
|
#define NRFX_I2S_CONFIG_SDIN_PIN 28
|
|
#endif
|
|
|
|
// <o> NRFX_I2S_CONFIG_MASTER - Mode
|
|
|
|
// <0=> Master
|
|
// <1=> Slave
|
|
|
|
#ifndef NRFX_I2S_CONFIG_MASTER
|
|
#define NRFX_I2S_CONFIG_MASTER 0
|
|
#endif
|
|
|
|
// <o> NRFX_I2S_CONFIG_FORMAT - Format
|
|
|
|
// <0=> I2S
|
|
// <1=> Aligned
|
|
|
|
#ifndef NRFX_I2S_CONFIG_FORMAT
|
|
#define NRFX_I2S_CONFIG_FORMAT 0
|
|
#endif
|
|
|
|
// <o> NRFX_I2S_CONFIG_ALIGN - Alignment
|
|
|
|
// <0=> Left
|
|
// <1=> Right
|
|
|
|
#ifndef NRFX_I2S_CONFIG_ALIGN
|
|
#define NRFX_I2S_CONFIG_ALIGN 0
|
|
#endif
|
|
|
|
// <o> NRFX_I2S_CONFIG_SWIDTH - Sample width (bits)
|
|
|
|
// <0=> 8
|
|
// <1=> 16
|
|
// <2=> 24
|
|
|
|
#ifndef NRFX_I2S_CONFIG_SWIDTH
|
|
#define NRFX_I2S_CONFIG_SWIDTH 1
|
|
#endif
|
|
|
|
// <o> NRFX_I2S_CONFIG_CHANNELS - Channels
|
|
|
|
// <0=> Stereo
|
|
// <1=> Left
|
|
// <2=> Right
|
|
|
|
#ifndef NRFX_I2S_CONFIG_CHANNELS
|
|
#define NRFX_I2S_CONFIG_CHANNELS 1
|
|
#endif
|
|
|
|
// <o> NRFX_I2S_CONFIG_MCK_SETUP - MCK behavior
|
|
|
|
// <0=> Disabled
|
|
// <2147483648=> 32MHz/2
|
|
// <1342177280=> 32MHz/3
|
|
// <1073741824=> 32MHz/4
|
|
// <805306368=> 32MHz/5
|
|
// <671088640=> 32MHz/6
|
|
// <536870912=> 32MHz/8
|
|
// <402653184=> 32MHz/10
|
|
// <369098752=> 32MHz/11
|
|
// <285212672=> 32MHz/15
|
|
// <268435456=> 32MHz/16
|
|
// <201326592=> 32MHz/21
|
|
// <184549376=> 32MHz/23
|
|
// <142606336=> 32MHz/30
|
|
// <138412032=> 32MHz/31
|
|
// <134217728=> 32MHz/32
|
|
// <100663296=> 32MHz/42
|
|
// <68157440=> 32MHz/63
|
|
// <34340864=> 32MHz/125
|
|
|
|
#ifndef NRFX_I2S_CONFIG_MCK_SETUP
|
|
#define NRFX_I2S_CONFIG_MCK_SETUP 536870912
|
|
#endif
|
|
|
|
// <o> NRFX_I2S_CONFIG_RATIO - MCK/LRCK ratio
|
|
|
|
// <0=> 32x
|
|
// <1=> 48x
|
|
// <2=> 64x
|
|
// <3=> 96x
|
|
// <4=> 128x
|
|
// <5=> 192x
|
|
// <6=> 256x
|
|
// <7=> 384x
|
|
// <8=> 512x
|
|
|
|
#ifndef NRFX_I2S_CONFIG_RATIO
|
|
#define NRFX_I2S_CONFIG_RATIO 2000
|
|
#endif
|
|
|
|
// <o> NRFX_I2S_CONFIG_IRQ_PRIORITY - Interrupt priority
|
|
|
|
// <0=> 0 (highest)
|
|
// <1=> 1
|
|
// <2=> 2
|
|
// <3=> 3
|
|
// <4=> 4
|
|
// <5=> 5
|
|
// <6=> 6
|
|
// <7=> 7
|
|
|
|
#ifndef NRFX_I2S_CONFIG_IRQ_PRIORITY
|
|
#define NRFX_I2S_CONFIG_IRQ_PRIORITY 6
|
|
#endif
|
|
|
|
// <e> NRFX_I2S_CONFIG_LOG_ENABLED - Enables logging in the module.
|
|
//==========================================================
|
|
#ifndef NRFX_I2S_CONFIG_LOG_ENABLED
|
|
#define NRFX_I2S_CONFIG_LOG_ENABLED 0
|
|
#endif
|
|
// <o> NRFX_I2S_CONFIG_LOG_LEVEL - Default Severity level
|
|
|
|
// <0=> Off
|
|
// <1=> Error
|
|
// <2=> Warning
|
|
// <3=> Info
|
|
// <4=> Debug
|
|
|
|
#ifndef NRFX_I2S_CONFIG_LOG_LEVEL
|
|
#define NRFX_I2S_CONFIG_LOG_LEVEL 3
|
|
#endif
|
|
|
|
// <o> NRFX_I2S_CONFIG_INFO_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef NRFX_I2S_CONFIG_INFO_COLOR
|
|
#define NRFX_I2S_CONFIG_INFO_COLOR 0
|
|
#endif
|
|
|
|
// <o> NRFX_I2S_CONFIG_DEBUG_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef NRFX_I2S_CONFIG_DEBUG_COLOR
|
|
#define NRFX_I2S_CONFIG_DEBUG_COLOR 0
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// </e>
|
|
|
|
// <e> NRFX_LPCOMP_ENABLED - nrfx_lpcomp - LPCOMP peripheral driver
|
|
//==========================================================
|
|
#ifndef NRFX_LPCOMP_ENABLED
|
|
#define NRFX_LPCOMP_ENABLED 0
|
|
#endif
|
|
// <o> NRFX_LPCOMP_CONFIG_REFERENCE - Reference voltage
|
|
|
|
// <0=> Supply 1/8
|
|
// <1=> Supply 2/8
|
|
// <2=> Supply 3/8
|
|
// <3=> Supply 4/8
|
|
// <4=> Supply 5/8
|
|
// <5=> Supply 6/8
|
|
// <6=> Supply 7/8
|
|
// <8=> Supply 1/16 (nRF52)
|
|
// <9=> Supply 3/16 (nRF52)
|
|
// <10=> Supply 5/16 (nRF52)
|
|
// <11=> Supply 7/16 (nRF52)
|
|
// <12=> Supply 9/16 (nRF52)
|
|
// <13=> Supply 11/16 (nRF52)
|
|
// <14=> Supply 13/16 (nRF52)
|
|
// <15=> Supply 15/16 (nRF52)
|
|
// <7=> External Ref 0
|
|
// <65543=> External Ref 1
|
|
|
|
#ifndef NRFX_LPCOMP_CONFIG_REFERENCE
|
|
#define NRFX_LPCOMP_CONFIG_REFERENCE 3
|
|
#endif
|
|
|
|
// <o> NRFX_LPCOMP_CONFIG_DETECTION - Detection
|
|
|
|
// <0=> Crossing
|
|
// <1=> Up
|
|
// <2=> Down
|
|
|
|
#ifndef NRFX_LPCOMP_CONFIG_DETECTION
|
|
#define NRFX_LPCOMP_CONFIG_DETECTION 2
|
|
#endif
|
|
|
|
// <o> NRFX_LPCOMP_CONFIG_INPUT - Analog input
|
|
|
|
// <0=> 0
|
|
// <1=> 1
|
|
// <2=> 2
|
|
// <3=> 3
|
|
// <4=> 4
|
|
// <5=> 5
|
|
// <6=> 6
|
|
// <7=> 7
|
|
|
|
#ifndef NRFX_LPCOMP_CONFIG_INPUT
|
|
#define NRFX_LPCOMP_CONFIG_INPUT 0
|
|
#endif
|
|
|
|
// <q> NRFX_LPCOMP_CONFIG_HYST - Hysteresis
|
|
|
|
#ifndef NRFX_LPCOMP_CONFIG_HYST
|
|
#define NRFX_LPCOMP_CONFIG_HYST 0
|
|
#endif
|
|
|
|
// <o> NRFX_LPCOMP_CONFIG_IRQ_PRIORITY - Interrupt priority
|
|
|
|
// <0=> 0 (highest)
|
|
// <1=> 1
|
|
// <2=> 2
|
|
// <3=> 3
|
|
// <4=> 4
|
|
// <5=> 5
|
|
// <6=> 6
|
|
// <7=> 7
|
|
|
|
#ifndef NRFX_LPCOMP_CONFIG_IRQ_PRIORITY
|
|
#define NRFX_LPCOMP_CONFIG_IRQ_PRIORITY 6
|
|
#endif
|
|
|
|
// <e> NRFX_LPCOMP_CONFIG_LOG_ENABLED - Enables logging in the module.
|
|
//==========================================================
|
|
#ifndef NRFX_LPCOMP_CONFIG_LOG_ENABLED
|
|
#define NRFX_LPCOMP_CONFIG_LOG_ENABLED 0
|
|
#endif
|
|
// <o> NRFX_LPCOMP_CONFIG_LOG_LEVEL - Default Severity level
|
|
|
|
// <0=> Off
|
|
// <1=> Error
|
|
// <2=> Warning
|
|
// <3=> Info
|
|
// <4=> Debug
|
|
|
|
#ifndef NRFX_LPCOMP_CONFIG_LOG_LEVEL
|
|
#define NRFX_LPCOMP_CONFIG_LOG_LEVEL 3
|
|
#endif
|
|
|
|
// <o> NRFX_LPCOMP_CONFIG_INFO_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef NRFX_LPCOMP_CONFIG_INFO_COLOR
|
|
#define NRFX_LPCOMP_CONFIG_INFO_COLOR 0
|
|
#endif
|
|
|
|
// <o> NRFX_LPCOMP_CONFIG_DEBUG_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef NRFX_LPCOMP_CONFIG_DEBUG_COLOR
|
|
#define NRFX_LPCOMP_CONFIG_DEBUG_COLOR 0
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// </e>
|
|
|
|
// <e> NRFX_PDM_ENABLED - nrfx_pdm - PDM peripheral driver
|
|
//==========================================================
|
|
#ifndef NRFX_PDM_ENABLED
|
|
#define NRFX_PDM_ENABLED 0
|
|
#endif
|
|
// <o> NRFX_PDM_CONFIG_MODE - Mode
|
|
|
|
// <0=> Stereo
|
|
// <1=> Mono
|
|
|
|
#ifndef NRFX_PDM_CONFIG_MODE
|
|
#define NRFX_PDM_CONFIG_MODE 1
|
|
#endif
|
|
|
|
// <o> NRFX_PDM_CONFIG_EDGE - Edge
|
|
|
|
// <0=> Left falling
|
|
// <1=> Left rising
|
|
|
|
#ifndef NRFX_PDM_CONFIG_EDGE
|
|
#define NRFX_PDM_CONFIG_EDGE 0
|
|
#endif
|
|
|
|
// <o> NRFX_PDM_CONFIG_CLOCK_FREQ - Clock frequency
|
|
|
|
// <134217728=> 1000k
|
|
// <138412032=> 1032k (default)
|
|
// <142606336=> 1067k
|
|
|
|
#ifndef NRFX_PDM_CONFIG_CLOCK_FREQ
|
|
#define NRFX_PDM_CONFIG_CLOCK_FREQ 138412032
|
|
#endif
|
|
|
|
// <o> NRFX_PDM_CONFIG_IRQ_PRIORITY - Interrupt priority
|
|
|
|
// <0=> 0 (highest)
|
|
// <1=> 1
|
|
// <2=> 2
|
|
// <3=> 3
|
|
// <4=> 4
|
|
// <5=> 5
|
|
// <6=> 6
|
|
// <7=> 7
|
|
|
|
#ifndef NRFX_PDM_CONFIG_IRQ_PRIORITY
|
|
#define NRFX_PDM_CONFIG_IRQ_PRIORITY 6
|
|
#endif
|
|
|
|
// <e> NRFX_PDM_CONFIG_LOG_ENABLED - Enables logging in the module.
|
|
//==========================================================
|
|
#ifndef NRFX_PDM_CONFIG_LOG_ENABLED
|
|
#define NRFX_PDM_CONFIG_LOG_ENABLED 0
|
|
#endif
|
|
// <o> NRFX_PDM_CONFIG_LOG_LEVEL - Default Severity level
|
|
|
|
// <0=> Off
|
|
// <1=> Error
|
|
// <2=> Warning
|
|
// <3=> Info
|
|
// <4=> Debug
|
|
|
|
#ifndef NRFX_PDM_CONFIG_LOG_LEVEL
|
|
#define NRFX_PDM_CONFIG_LOG_LEVEL 3
|
|
#endif
|
|
|
|
// <o> NRFX_PDM_CONFIG_INFO_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef NRFX_PDM_CONFIG_INFO_COLOR
|
|
#define NRFX_PDM_CONFIG_INFO_COLOR 0
|
|
#endif
|
|
|
|
// <o> NRFX_PDM_CONFIG_DEBUG_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef NRFX_PDM_CONFIG_DEBUG_COLOR
|
|
#define NRFX_PDM_CONFIG_DEBUG_COLOR 0
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// </e>
|
|
|
|
// <e> NRFX_POWER_ENABLED - nrfx_power - POWER peripheral driver
|
|
//==========================================================
|
|
#ifndef NRFX_POWER_ENABLED
|
|
#define NRFX_POWER_ENABLED 0
|
|
#endif
|
|
// <o> NRFX_POWER_CONFIG_IRQ_PRIORITY - Interrupt priority
|
|
|
|
// <0=> 0 (highest)
|
|
// <1=> 1
|
|
// <2=> 2
|
|
// <3=> 3
|
|
// <4=> 4
|
|
// <5=> 5
|
|
// <6=> 6
|
|
// <7=> 7
|
|
|
|
#ifndef NRFX_POWER_CONFIG_IRQ_PRIORITY
|
|
#define NRFX_POWER_CONFIG_IRQ_PRIORITY 6
|
|
#endif
|
|
|
|
// <q> NRFX_POWER_CONFIG_DEFAULT_DCDCEN - The default configuration of main DCDC regulator
|
|
|
|
// <i> This settings means only that components for DCDC regulator are installed and it can be enabled.
|
|
|
|
#ifndef NRFX_POWER_CONFIG_DEFAULT_DCDCEN
|
|
#define NRFX_POWER_CONFIG_DEFAULT_DCDCEN 0
|
|
#endif
|
|
|
|
// <q> NRFX_POWER_CONFIG_DEFAULT_DCDCENHV - The default configuration of High Voltage DCDC regulator
|
|
|
|
// <i> This settings means only that components for DCDC regulator are installed and it can be enabled.
|
|
|
|
#ifndef NRFX_POWER_CONFIG_DEFAULT_DCDCENHV
|
|
#define NRFX_POWER_CONFIG_DEFAULT_DCDCENHV 0
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// <e> NRFX_PPI_ENABLED - nrfx_ppi - PPI peripheral allocator
|
|
//==========================================================
|
|
#ifndef NRFX_PPI_ENABLED
|
|
#define NRFX_PPI_ENABLED 0
|
|
#endif
|
|
// <e> NRFX_PPI_CONFIG_LOG_ENABLED - Enables logging in the module.
|
|
//==========================================================
|
|
#ifndef NRFX_PPI_CONFIG_LOG_ENABLED
|
|
#define NRFX_PPI_CONFIG_LOG_ENABLED 0
|
|
#endif
|
|
// <o> NRFX_PPI_CONFIG_LOG_LEVEL - Default Severity level
|
|
|
|
// <0=> Off
|
|
// <1=> Error
|
|
// <2=> Warning
|
|
// <3=> Info
|
|
// <4=> Debug
|
|
|
|
#ifndef NRFX_PPI_CONFIG_LOG_LEVEL
|
|
#define NRFX_PPI_CONFIG_LOG_LEVEL 3
|
|
#endif
|
|
|
|
// <o> NRFX_PPI_CONFIG_INFO_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef NRFX_PPI_CONFIG_INFO_COLOR
|
|
#define NRFX_PPI_CONFIG_INFO_COLOR 0
|
|
#endif
|
|
|
|
// <o> NRFX_PPI_CONFIG_DEBUG_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef NRFX_PPI_CONFIG_DEBUG_COLOR
|
|
#define NRFX_PPI_CONFIG_DEBUG_COLOR 0
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// </e>
|
|
|
|
// <e> NRFX_PRS_ENABLED - nrfx_prs - Peripheral Resource Sharing module
|
|
//==========================================================
|
|
#ifndef NRFX_PRS_ENABLED
|
|
#define NRFX_PRS_ENABLED 0
|
|
#endif
|
|
// <q> NRFX_PRS_BOX_0_ENABLED - Enables box 0 in the module.
|
|
|
|
#ifndef NRFX_PRS_BOX_0_ENABLED
|
|
#define NRFX_PRS_BOX_0_ENABLED 0
|
|
#endif
|
|
|
|
// <q> NRFX_PRS_BOX_1_ENABLED - Enables box 1 in the module.
|
|
|
|
#ifndef NRFX_PRS_BOX_1_ENABLED
|
|
#define NRFX_PRS_BOX_1_ENABLED 0
|
|
#endif
|
|
|
|
// <q> NRFX_PRS_BOX_2_ENABLED - Enables box 2 in the module.
|
|
|
|
#ifndef NRFX_PRS_BOX_2_ENABLED
|
|
#define NRFX_PRS_BOX_2_ENABLED 0
|
|
#endif
|
|
|
|
// <q> NRFX_PRS_BOX_3_ENABLED - Enables box 3 in the module.
|
|
|
|
#ifndef NRFX_PRS_BOX_3_ENABLED
|
|
#define NRFX_PRS_BOX_3_ENABLED 0
|
|
#endif
|
|
|
|
// <q> NRFX_PRS_BOX_4_ENABLED - Enables box 4 in the module.
|
|
|
|
#ifndef NRFX_PRS_BOX_4_ENABLED
|
|
#define NRFX_PRS_BOX_4_ENABLED 1
|
|
#endif
|
|
|
|
// <e> NRFX_PRS_CONFIG_LOG_ENABLED - Enables logging in the module.
|
|
//==========================================================
|
|
#ifndef NRFX_PRS_CONFIG_LOG_ENABLED
|
|
#define NRFX_PRS_CONFIG_LOG_ENABLED 0
|
|
#endif
|
|
// <o> NRFX_PRS_CONFIG_LOG_LEVEL - Default Severity level
|
|
|
|
// <0=> Off
|
|
// <1=> Error
|
|
// <2=> Warning
|
|
// <3=> Info
|
|
// <4=> Debug
|
|
|
|
#ifndef NRFX_PRS_CONFIG_LOG_LEVEL
|
|
#define NRFX_PRS_CONFIG_LOG_LEVEL 3
|
|
#endif
|
|
|
|
// <o> NRFX_PRS_CONFIG_INFO_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef NRFX_PRS_CONFIG_INFO_COLOR
|
|
#define NRFX_PRS_CONFIG_INFO_COLOR 0
|
|
#endif
|
|
|
|
// <o> NRFX_PRS_CONFIG_DEBUG_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef NRFX_PRS_CONFIG_DEBUG_COLOR
|
|
#define NRFX_PRS_CONFIG_DEBUG_COLOR 0
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// </e>
|
|
|
|
// <e> NRFX_PWM_ENABLED - nrfx_pwm - PWM peripheral driver
|
|
//==========================================================
|
|
#ifndef NRFX_PWM_ENABLED
|
|
#define NRFX_PWM_ENABLED 0
|
|
#endif
|
|
// <q> NRFX_PWM0_ENABLED - Enable PWM0 instance
|
|
|
|
#ifndef NRFX_PWM0_ENABLED
|
|
#define NRFX_PWM0_ENABLED 0
|
|
#endif
|
|
|
|
// <q> NRFX_PWM1_ENABLED - Enable PWM1 instance
|
|
|
|
#ifndef NRFX_PWM1_ENABLED
|
|
#define NRFX_PWM1_ENABLED 0
|
|
#endif
|
|
|
|
// <q> NRFX_PWM2_ENABLED - Enable PWM2 instance
|
|
|
|
#ifndef NRFX_PWM2_ENABLED
|
|
#define NRFX_PWM2_ENABLED 0
|
|
#endif
|
|
|
|
// <o> NRFX_PWM_DEFAULT_CONFIG_OUT0_PIN - Out0 pin <0-31>
|
|
|
|
#ifndef NRFX_PWM_DEFAULT_CONFIG_OUT0_PIN
|
|
#define NRFX_PWM_DEFAULT_CONFIG_OUT0_PIN 31
|
|
#endif
|
|
|
|
// <o> NRFX_PWM_DEFAULT_CONFIG_OUT1_PIN - Out1 pin <0-31>
|
|
|
|
#ifndef NRFX_PWM_DEFAULT_CONFIG_OUT1_PIN
|
|
#define NRFX_PWM_DEFAULT_CONFIG_OUT1_PIN 31
|
|
#endif
|
|
|
|
// <o> NRFX_PWM_DEFAULT_CONFIG_OUT2_PIN - Out2 pin <0-31>
|
|
|
|
#ifndef NRFX_PWM_DEFAULT_CONFIG_OUT2_PIN
|
|
#define NRFX_PWM_DEFAULT_CONFIG_OUT2_PIN 31
|
|
#endif
|
|
|
|
// <o> NRFX_PWM_DEFAULT_CONFIG_OUT3_PIN - Out3 pin <0-31>
|
|
|
|
#ifndef NRFX_PWM_DEFAULT_CONFIG_OUT3_PIN
|
|
#define NRFX_PWM_DEFAULT_CONFIG_OUT3_PIN 31
|
|
#endif
|
|
|
|
// <o> NRFX_PWM_DEFAULT_CONFIG_BASE_CLOCK - Base clock
|
|
|
|
// <0=> 16 MHz
|
|
// <1=> 8 MHz
|
|
// <2=> 4 MHz
|
|
// <3=> 2 MHz
|
|
// <4=> 1 MHz
|
|
// <5=> 500 kHz
|
|
// <6=> 250 kHz
|
|
// <7=> 125 kHz
|
|
|
|
#ifndef NRFX_PWM_DEFAULT_CONFIG_BASE_CLOCK
|
|
#define NRFX_PWM_DEFAULT_CONFIG_BASE_CLOCK 4
|
|
#endif
|
|
|
|
// <o> NRFX_PWM_DEFAULT_CONFIG_COUNT_MODE - Count mode
|
|
|
|
// <0=> Up
|
|
// <1=> Up and Down
|
|
|
|
#ifndef NRFX_PWM_DEFAULT_CONFIG_COUNT_MODE
|
|
#define NRFX_PWM_DEFAULT_CONFIG_COUNT_MODE 0
|
|
#endif
|
|
|
|
// <o> NRFX_PWM_DEFAULT_CONFIG_TOP_VALUE - Top value
|
|
#ifndef NRFX_PWM_DEFAULT_CONFIG_TOP_VALUE
|
|
#define NRFX_PWM_DEFAULT_CONFIG_TOP_VALUE 1000
|
|
#endif
|
|
|
|
// <o> NRFX_PWM_DEFAULT_CONFIG_LOAD_MODE - Load mode
|
|
|
|
// <0=> Common
|
|
// <1=> Grouped
|
|
// <2=> Individual
|
|
// <3=> Waveform
|
|
|
|
#ifndef NRFX_PWM_DEFAULT_CONFIG_LOAD_MODE
|
|
#define NRFX_PWM_DEFAULT_CONFIG_LOAD_MODE 0
|
|
#endif
|
|
|
|
// <o> NRFX_PWM_DEFAULT_CONFIG_STEP_MODE - Step mode
|
|
|
|
// <0=> Auto
|
|
// <1=> Triggered
|
|
|
|
#ifndef NRFX_PWM_DEFAULT_CONFIG_STEP_MODE
|
|
#define NRFX_PWM_DEFAULT_CONFIG_STEP_MODE 0
|
|
#endif
|
|
|
|
// <o> NRFX_PWM_DEFAULT_CONFIG_IRQ_PRIORITY - Interrupt priority
|
|
|
|
// <0=> 0 (highest)
|
|
// <1=> 1
|
|
// <2=> 2
|
|
// <3=> 3
|
|
// <4=> 4
|
|
// <5=> 5
|
|
// <6=> 6
|
|
// <7=> 7
|
|
|
|
#ifndef NRFX_PWM_DEFAULT_CONFIG_IRQ_PRIORITY
|
|
#define NRFX_PWM_DEFAULT_CONFIG_IRQ_PRIORITY 6
|
|
#endif
|
|
|
|
// <e> NRFX_PWM_CONFIG_LOG_ENABLED - Enables logging in the module.
|
|
//==========================================================
|
|
#ifndef NRFX_PWM_CONFIG_LOG_ENABLED
|
|
#define NRFX_PWM_CONFIG_LOG_ENABLED 0
|
|
#endif
|
|
// <o> NRFX_PWM_CONFIG_LOG_LEVEL - Default Severity level
|
|
|
|
// <0=> Off
|
|
// <1=> Error
|
|
// <2=> Warning
|
|
// <3=> Info
|
|
// <4=> Debug
|
|
|
|
#ifndef NRFX_PWM_CONFIG_LOG_LEVEL
|
|
#define NRFX_PWM_CONFIG_LOG_LEVEL 3
|
|
#endif
|
|
|
|
// <o> NRFX_PWM_CONFIG_INFO_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef NRFX_PWM_CONFIG_INFO_COLOR
|
|
#define NRFX_PWM_CONFIG_INFO_COLOR 0
|
|
#endif
|
|
|
|
// <o> NRFX_PWM_CONFIG_DEBUG_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef NRFX_PWM_CONFIG_DEBUG_COLOR
|
|
#define NRFX_PWM_CONFIG_DEBUG_COLOR 0
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// <e> NRFX_PWM_NRF52_ANOMALY_109_WORKAROUND_ENABLED - Enables nRF52 Anomaly 109 workaround for PWM.
|
|
|
|
// <i> The workaround uses interrupts to wake up the CPU and ensure
|
|
// <i> it is active when PWM is about to start a DMA transfer. For
|
|
// <i> initial transfer, done when a playback is started via PPI,
|
|
// <i> a specific EGU instance is used to generate the interrupt.
|
|
// <i> During the playback, the PWM interrupt triggered on SEQEND
|
|
// <i> event of a preceding sequence is used to protect the transfer
|
|
// <i> done for the next sequence to be played.
|
|
//==========================================================
|
|
#ifndef NRFX_PWM_NRF52_ANOMALY_109_WORKAROUND_ENABLED
|
|
#define NRFX_PWM_NRF52_ANOMALY_109_WORKAROUND_ENABLED 0
|
|
#endif
|
|
// <o> NRFX_PWM_NRF52_ANOMALY_109_EGU_INSTANCE - EGU instance used by the nRF52 Anomaly 109 workaround for PWM.
|
|
|
|
// <0=> EGU0
|
|
// <1=> EGU1
|
|
// <2=> EGU2
|
|
// <3=> EGU3
|
|
// <4=> EGU4
|
|
// <5=> EGU5
|
|
|
|
#ifndef NRFX_PWM_NRF52_ANOMALY_109_EGU_INSTANCE
|
|
#define NRFX_PWM_NRF52_ANOMALY_109_EGU_INSTANCE 5
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// </e>
|
|
|
|
// <e> NRFX_QDEC_ENABLED - nrfx_qdec - QDEC peripheral driver
|
|
//==========================================================
|
|
#ifndef NRFX_QDEC_ENABLED
|
|
#define NRFX_QDEC_ENABLED 0
|
|
#endif
|
|
// <o> NRFX_QDEC_CONFIG_REPORTPER - Report period
|
|
|
|
// <0=> 10 Samples
|
|
// <1=> 40 Samples
|
|
// <2=> 80 Samples
|
|
// <3=> 120 Samples
|
|
// <4=> 160 Samples
|
|
// <5=> 200 Samples
|
|
// <6=> 240 Samples
|
|
// <7=> 280 Samples
|
|
|
|
#ifndef NRFX_QDEC_CONFIG_REPORTPER
|
|
#define NRFX_QDEC_CONFIG_REPORTPER 0
|
|
#endif
|
|
|
|
// <o> NRFX_QDEC_CONFIG_SAMPLEPER - Sample period
|
|
|
|
// <0=> 128 us
|
|
// <1=> 256 us
|
|
// <2=> 512 us
|
|
// <3=> 1024 us
|
|
// <4=> 2048 us
|
|
// <5=> 4096 us
|
|
// <6=> 8192 us
|
|
// <7=> 16384 us
|
|
|
|
#ifndef NRFX_QDEC_CONFIG_SAMPLEPER
|
|
#define NRFX_QDEC_CONFIG_SAMPLEPER 7
|
|
#endif
|
|
|
|
// <o> NRFX_QDEC_CONFIG_PIO_A - A pin <0-31>
|
|
|
|
#ifndef NRFX_QDEC_CONFIG_PIO_A
|
|
#define NRFX_QDEC_CONFIG_PIO_A 31
|
|
#endif
|
|
|
|
// <o> NRFX_QDEC_CONFIG_PIO_B - B pin <0-31>
|
|
|
|
#ifndef NRFX_QDEC_CONFIG_PIO_B
|
|
#define NRFX_QDEC_CONFIG_PIO_B 31
|
|
#endif
|
|
|
|
// <o> NRFX_QDEC_CONFIG_PIO_LED - LED pin <0-31>
|
|
|
|
#ifndef NRFX_QDEC_CONFIG_PIO_LED
|
|
#define NRFX_QDEC_CONFIG_PIO_LED 31
|
|
#endif
|
|
|
|
// <o> NRFX_QDEC_CONFIG_LEDPRE - LED pre
|
|
#ifndef NRFX_QDEC_CONFIG_LEDPRE
|
|
#define NRFX_QDEC_CONFIG_LEDPRE 511
|
|
#endif
|
|
|
|
// <o> NRFX_QDEC_CONFIG_LEDPOL - LED polarity
|
|
|
|
// <0=> Active low
|
|
// <1=> Active high
|
|
|
|
#ifndef NRFX_QDEC_CONFIG_LEDPOL
|
|
#define NRFX_QDEC_CONFIG_LEDPOL 1
|
|
#endif
|
|
|
|
// <q> NRFX_QDEC_CONFIG_DBFEN - Debouncing enable
|
|
|
|
#ifndef NRFX_QDEC_CONFIG_DBFEN
|
|
#define NRFX_QDEC_CONFIG_DBFEN 0
|
|
#endif
|
|
|
|
// <q> NRFX_QDEC_CONFIG_SAMPLE_INTEN - Sample ready interrupt enable
|
|
|
|
#ifndef NRFX_QDEC_CONFIG_SAMPLE_INTEN
|
|
#define NRFX_QDEC_CONFIG_SAMPLE_INTEN 0
|
|
#endif
|
|
|
|
// <o> NRFX_QDEC_CONFIG_IRQ_PRIORITY - Interrupt priority
|
|
|
|
// <0=> 0 (highest)
|
|
// <1=> 1
|
|
// <2=> 2
|
|
// <3=> 3
|
|
// <4=> 4
|
|
// <5=> 5
|
|
// <6=> 6
|
|
// <7=> 7
|
|
|
|
#ifndef NRFX_QDEC_CONFIG_IRQ_PRIORITY
|
|
#define NRFX_QDEC_CONFIG_IRQ_PRIORITY 6
|
|
#endif
|
|
|
|
// <e> NRFX_QDEC_CONFIG_LOG_ENABLED - Enables logging in the module.
|
|
//==========================================================
|
|
#ifndef NRFX_QDEC_CONFIG_LOG_ENABLED
|
|
#define NRFX_QDEC_CONFIG_LOG_ENABLED 0
|
|
#endif
|
|
// <o> NRFX_QDEC_CONFIG_LOG_LEVEL - Default Severity level
|
|
|
|
// <0=> Off
|
|
// <1=> Error
|
|
// <2=> Warning
|
|
// <3=> Info
|
|
// <4=> Debug
|
|
|
|
#ifndef NRFX_QDEC_CONFIG_LOG_LEVEL
|
|
#define NRFX_QDEC_CONFIG_LOG_LEVEL 3
|
|
#endif
|
|
|
|
// <o> NRFX_QDEC_CONFIG_INFO_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef NRFX_QDEC_CONFIG_INFO_COLOR
|
|
#define NRFX_QDEC_CONFIG_INFO_COLOR 0
|
|
#endif
|
|
|
|
// <o> NRFX_QDEC_CONFIG_DEBUG_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef NRFX_QDEC_CONFIG_DEBUG_COLOR
|
|
#define NRFX_QDEC_CONFIG_DEBUG_COLOR 0
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// </e>
|
|
|
|
// <e> NRFX_RNG_ENABLED - nrfx_rng - RNG peripheral driver
|
|
//==========================================================
|
|
#ifndef NRFX_RNG_ENABLED
|
|
#define NRFX_RNG_ENABLED 0
|
|
#endif
|
|
// <q> NRFX_RNG_CONFIG_ERROR_CORRECTION - Error correction
|
|
|
|
#ifndef NRFX_RNG_CONFIG_ERROR_CORRECTION
|
|
#define NRFX_RNG_CONFIG_ERROR_CORRECTION 1
|
|
#endif
|
|
|
|
// <o> NRFX_RNG_CONFIG_IRQ_PRIORITY - Interrupt priority
|
|
|
|
// <0=> 0 (highest)
|
|
// <1=> 1
|
|
// <2=> 2
|
|
// <3=> 3
|
|
// <4=> 4
|
|
// <5=> 5
|
|
// <6=> 6
|
|
// <7=> 7
|
|
|
|
#ifndef NRFX_RNG_CONFIG_IRQ_PRIORITY
|
|
#define NRFX_RNG_CONFIG_IRQ_PRIORITY 6
|
|
#endif
|
|
|
|
// <e> NRFX_RNG_CONFIG_LOG_ENABLED - Enables logging in the module.
|
|
//==========================================================
|
|
#ifndef NRFX_RNG_CONFIG_LOG_ENABLED
|
|
#define NRFX_RNG_CONFIG_LOG_ENABLED 0
|
|
#endif
|
|
// <o> NRFX_RNG_CONFIG_LOG_LEVEL - Default Severity level
|
|
|
|
// <0=> Off
|
|
// <1=> Error
|
|
// <2=> Warning
|
|
// <3=> Info
|
|
// <4=> Debug
|
|
|
|
#ifndef NRFX_RNG_CONFIG_LOG_LEVEL
|
|
#define NRFX_RNG_CONFIG_LOG_LEVEL 3
|
|
#endif
|
|
|
|
// <o> NRFX_RNG_CONFIG_INFO_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef NRFX_RNG_CONFIG_INFO_COLOR
|
|
#define NRFX_RNG_CONFIG_INFO_COLOR 0
|
|
#endif
|
|
|
|
// <o> NRFX_RNG_CONFIG_DEBUG_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef NRFX_RNG_CONFIG_DEBUG_COLOR
|
|
#define NRFX_RNG_CONFIG_DEBUG_COLOR 0
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// </e>
|
|
|
|
// <e> NRFX_RTC_ENABLED - nrfx_rtc - RTC peripheral driver
|
|
//==========================================================
|
|
#ifndef NRFX_RTC_ENABLED
|
|
#define NRFX_RTC_ENABLED 0
|
|
#endif
|
|
// <q> NRFX_RTC0_ENABLED - Enable RTC0 instance
|
|
|
|
#ifndef NRFX_RTC0_ENABLED
|
|
#define NRFX_RTC0_ENABLED 0
|
|
#endif
|
|
|
|
// <q> NRFX_RTC1_ENABLED - Enable RTC1 instance
|
|
|
|
#ifndef NRFX_RTC1_ENABLED
|
|
#define NRFX_RTC1_ENABLED 0
|
|
#endif
|
|
|
|
// <q> NRFX_RTC2_ENABLED - Enable RTC2 instance
|
|
|
|
#ifndef NRFX_RTC2_ENABLED
|
|
#define NRFX_RTC2_ENABLED 0
|
|
#endif
|
|
|
|
// <o> NRFX_RTC_MAXIMUM_LATENCY_US - Maximum possible time[us] in highest priority interrupt
|
|
#ifndef NRFX_RTC_MAXIMUM_LATENCY_US
|
|
#define NRFX_RTC_MAXIMUM_LATENCY_US 2000
|
|
#endif
|
|
|
|
// <o> NRFX_RTC_DEFAULT_CONFIG_FREQUENCY - Frequency <16-32768>
|
|
|
|
#ifndef NRFX_RTC_DEFAULT_CONFIG_FREQUENCY
|
|
#define NRFX_RTC_DEFAULT_CONFIG_FREQUENCY 32768
|
|
#endif
|
|
|
|
// <q> NRFX_RTC_DEFAULT_CONFIG_RELIABLE - Ensures safe compare event triggering
|
|
|
|
#ifndef NRFX_RTC_DEFAULT_CONFIG_RELIABLE
|
|
#define NRFX_RTC_DEFAULT_CONFIG_RELIABLE 0
|
|
#endif
|
|
|
|
// <o> NRFX_RTC_DEFAULT_CONFIG_IRQ_PRIORITY - Interrupt priority
|
|
|
|
// <0=> 0 (highest)
|
|
// <1=> 1
|
|
// <2=> 2
|
|
// <3=> 3
|
|
// <4=> 4
|
|
// <5=> 5
|
|
// <6=> 6
|
|
// <7=> 7
|
|
|
|
#ifndef NRFX_RTC_DEFAULT_CONFIG_IRQ_PRIORITY
|
|
#define NRFX_RTC_DEFAULT_CONFIG_IRQ_PRIORITY 6
|
|
#endif
|
|
|
|
// <e> NRFX_RTC_CONFIG_LOG_ENABLED - Enables logging in the module.
|
|
//==========================================================
|
|
#ifndef NRFX_RTC_CONFIG_LOG_ENABLED
|
|
#define NRFX_RTC_CONFIG_LOG_ENABLED 0
|
|
#endif
|
|
// <o> NRFX_RTC_CONFIG_LOG_LEVEL - Default Severity level
|
|
|
|
// <0=> Off
|
|
// <1=> Error
|
|
// <2=> Warning
|
|
// <3=> Info
|
|
// <4=> Debug
|
|
|
|
#ifndef NRFX_RTC_CONFIG_LOG_LEVEL
|
|
#define NRFX_RTC_CONFIG_LOG_LEVEL 3
|
|
#endif
|
|
|
|
// <o> NRFX_RTC_CONFIG_INFO_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef NRFX_RTC_CONFIG_INFO_COLOR
|
|
#define NRFX_RTC_CONFIG_INFO_COLOR 0
|
|
#endif
|
|
|
|
// <o> NRFX_RTC_CONFIG_DEBUG_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef NRFX_RTC_CONFIG_DEBUG_COLOR
|
|
#define NRFX_RTC_CONFIG_DEBUG_COLOR 0
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// </e>
|
|
|
|
// <e> NRFX_SAADC_ENABLED - nrfx_saadc - SAADC peripheral driver
|
|
//==========================================================
|
|
#ifndef NRFX_SAADC_ENABLED
|
|
#define NRFX_SAADC_ENABLED 1
|
|
#endif
|
|
// <o> NRFX_SAADC_CONFIG_RESOLUTION - Resolution
|
|
|
|
// <0=> 8 bit
|
|
// <1=> 10 bit
|
|
// <2=> 12 bit
|
|
// <3=> 14 bit
|
|
|
|
#ifndef NRFX_SAADC_CONFIG_RESOLUTION
|
|
#define NRFX_SAADC_CONFIG_RESOLUTION 1
|
|
#endif
|
|
|
|
// <o> NRFX_SAADC_CONFIG_OVERSAMPLE - Sample period
|
|
|
|
// <0=> Disabled
|
|
// <1=> 2x
|
|
// <2=> 4x
|
|
// <3=> 8x
|
|
// <4=> 16x
|
|
// <5=> 32x
|
|
// <6=> 64x
|
|
// <7=> 128x
|
|
// <8=> 256x
|
|
|
|
#ifndef NRFX_SAADC_CONFIG_OVERSAMPLE
|
|
#define NRFX_SAADC_CONFIG_OVERSAMPLE 0
|
|
#endif
|
|
|
|
// <q> NRFX_SAADC_CONFIG_LP_MODE - Enabling low power mode
|
|
|
|
#ifndef NRFX_SAADC_CONFIG_LP_MODE
|
|
#define NRFX_SAADC_CONFIG_LP_MODE 0
|
|
#endif
|
|
|
|
// <o> NRFX_SAADC_CONFIG_IRQ_PRIORITY - Interrupt priority
|
|
|
|
// <0=> 0 (highest)
|
|
// <1=> 1
|
|
// <2=> 2
|
|
// <3=> 3
|
|
// <4=> 4
|
|
// <5=> 5
|
|
// <6=> 6
|
|
// <7=> 7
|
|
|
|
#ifndef NRFX_SAADC_CONFIG_IRQ_PRIORITY
|
|
#define NRFX_SAADC_CONFIG_IRQ_PRIORITY 6
|
|
#endif
|
|
|
|
// <e> NRFX_SAADC_CONFIG_LOG_ENABLED - Enables logging in the module.
|
|
//==========================================================
|
|
#ifndef NRFX_SAADC_CONFIG_LOG_ENABLED
|
|
#define NRFX_SAADC_CONFIG_LOG_ENABLED 0
|
|
#endif
|
|
// <o> NRFX_SAADC_CONFIG_LOG_LEVEL - Default Severity level
|
|
|
|
// <0=> Off
|
|
// <1=> Error
|
|
// <2=> Warning
|
|
// <3=> Info
|
|
// <4=> Debug
|
|
|
|
#ifndef NRFX_SAADC_CONFIG_LOG_LEVEL
|
|
#define NRFX_SAADC_CONFIG_LOG_LEVEL 3
|
|
#endif
|
|
|
|
// <o> NRFX_SAADC_CONFIG_INFO_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef NRFX_SAADC_CONFIG_INFO_COLOR
|
|
#define NRFX_SAADC_CONFIG_INFO_COLOR 0
|
|
#endif
|
|
|
|
// <o> NRFX_SAADC_CONFIG_DEBUG_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef NRFX_SAADC_CONFIG_DEBUG_COLOR
|
|
#define NRFX_SAADC_CONFIG_DEBUG_COLOR 0
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// </e>
|
|
|
|
// <e> NRFX_SPIM_ENABLED - nrfx_spim - SPIM peripheral driver
|
|
//==========================================================
|
|
#ifndef NRFX_SPIM_ENABLED
|
|
#define NRFX_SPIM_ENABLED 0
|
|
#endif
|
|
// <q> NRFX_SPIM0_ENABLED - Enable SPIM0 instance
|
|
|
|
#ifndef NRFX_SPIM0_ENABLED
|
|
#define NRFX_SPIM0_ENABLED 0
|
|
#endif
|
|
|
|
// <q> NRFX_SPIM1_ENABLED - Enable SPIM1 instance
|
|
|
|
#ifndef NRFX_SPIM1_ENABLED
|
|
#define NRFX_SPIM1_ENABLED 0
|
|
#endif
|
|
|
|
// <q> NRFX_SPIM2_ENABLED - Enable SPIM2 instance
|
|
|
|
#ifndef NRFX_SPIM2_ENABLED
|
|
#define NRFX_SPIM2_ENABLED 0
|
|
#endif
|
|
|
|
// <o> NRFX_SPIM_MISO_PULL_CFG - MISO pin pull configuration.
|
|
|
|
// <0=> NRF_GPIO_PIN_NOPULL
|
|
// <1=> NRF_GPIO_PIN_PULLDOWN
|
|
// <3=> NRF_GPIO_PIN_PULLUP
|
|
|
|
#ifndef NRFX_SPIM_MISO_PULL_CFG
|
|
#define NRFX_SPIM_MISO_PULL_CFG 1
|
|
#endif
|
|
|
|
// <o> NRFX_SPIM_DEFAULT_CONFIG_IRQ_PRIORITY - Interrupt priority
|
|
|
|
// <0=> 0 (highest)
|
|
// <1=> 1
|
|
// <2=> 2
|
|
// <3=> 3
|
|
// <4=> 4
|
|
// <5=> 5
|
|
// <6=> 6
|
|
// <7=> 7
|
|
|
|
#ifndef NRFX_SPIM_DEFAULT_CONFIG_IRQ_PRIORITY
|
|
#define NRFX_SPIM_DEFAULT_CONFIG_IRQ_PRIORITY 6
|
|
#endif
|
|
|
|
// <e> NRFX_SPIM_CONFIG_LOG_ENABLED - Enables logging in the module.
|
|
//==========================================================
|
|
#ifndef NRFX_SPIM_CONFIG_LOG_ENABLED
|
|
#define NRFX_SPIM_CONFIG_LOG_ENABLED 0
|
|
#endif
|
|
// <o> NRFX_SPIM_CONFIG_LOG_LEVEL - Default Severity level
|
|
|
|
// <0=> Off
|
|
// <1=> Error
|
|
// <2=> Warning
|
|
// <3=> Info
|
|
// <4=> Debug
|
|
|
|
#ifndef NRFX_SPIM_CONFIG_LOG_LEVEL
|
|
#define NRFX_SPIM_CONFIG_LOG_LEVEL 3
|
|
#endif
|
|
|
|
// <o> NRFX_SPIM_CONFIG_INFO_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef NRFX_SPIM_CONFIG_INFO_COLOR
|
|
#define NRFX_SPIM_CONFIG_INFO_COLOR 0
|
|
#endif
|
|
|
|
// <o> NRFX_SPIM_CONFIG_DEBUG_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef NRFX_SPIM_CONFIG_DEBUG_COLOR
|
|
#define NRFX_SPIM_CONFIG_DEBUG_COLOR 0
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// <q> NRFX_SPIM_NRF52_ANOMALY_109_WORKAROUND_ENABLED - Enables nRF52 anomaly 109 workaround for SPIM.
|
|
|
|
// <i> The workaround uses interrupts to wake up the CPU by catching
|
|
// <i> a start event of zero-length transmission to start the clock. This
|
|
// <i> ensures that the DMA transfer will be executed without issues and
|
|
// <i> that the proper transfer will be started. See more in the Errata
|
|
// <i> document or Anomaly 109 Addendum located at
|
|
// <i> https://infocenter.nordicsemi.com/
|
|
|
|
#ifndef NRFX_SPIM_NRF52_ANOMALY_109_WORKAROUND_ENABLED
|
|
#define NRFX_SPIM_NRF52_ANOMALY_109_WORKAROUND_ENABLED 0
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// <e> NRFX_SPIS_ENABLED - nrfx_spis - SPIS peripheral driver
|
|
//==========================================================
|
|
#ifndef NRFX_SPIS_ENABLED
|
|
#define NRFX_SPIS_ENABLED 0
|
|
#endif
|
|
// <q> NRFX_SPIS0_ENABLED - Enable SPIS0 instance
|
|
|
|
#ifndef NRFX_SPIS0_ENABLED
|
|
#define NRFX_SPIS0_ENABLED 0
|
|
#endif
|
|
|
|
// <q> NRFX_SPIS1_ENABLED - Enable SPIS1 instance
|
|
|
|
#ifndef NRFX_SPIS1_ENABLED
|
|
#define NRFX_SPIS1_ENABLED 0
|
|
#endif
|
|
|
|
// <q> NRFX_SPIS2_ENABLED - Enable SPIS2 instance
|
|
|
|
#ifndef NRFX_SPIS2_ENABLED
|
|
#define NRFX_SPIS2_ENABLED 0
|
|
#endif
|
|
|
|
// <o> NRFX_SPIS_DEFAULT_CONFIG_IRQ_PRIORITY - Interrupt priority
|
|
|
|
// <0=> 0 (highest)
|
|
// <1=> 1
|
|
// <2=> 2
|
|
// <3=> 3
|
|
// <4=> 4
|
|
// <5=> 5
|
|
// <6=> 6
|
|
// <7=> 7
|
|
|
|
#ifndef NRFX_SPIS_DEFAULT_CONFIG_IRQ_PRIORITY
|
|
#define NRFX_SPIS_DEFAULT_CONFIG_IRQ_PRIORITY 6
|
|
#endif
|
|
|
|
// <o> NRFX_SPIS_DEFAULT_DEF - SPIS default DEF character <0-255>
|
|
|
|
#ifndef NRFX_SPIS_DEFAULT_DEF
|
|
#define NRFX_SPIS_DEFAULT_DEF 255
|
|
#endif
|
|
|
|
// <o> NRFX_SPIS_DEFAULT_ORC - SPIS default ORC character <0-255>
|
|
|
|
#ifndef NRFX_SPIS_DEFAULT_ORC
|
|
#define NRFX_SPIS_DEFAULT_ORC 255
|
|
#endif
|
|
|
|
// <e> NRFX_SPIS_CONFIG_LOG_ENABLED - Enables logging in the module.
|
|
//==========================================================
|
|
#ifndef NRFX_SPIS_CONFIG_LOG_ENABLED
|
|
#define NRFX_SPIS_CONFIG_LOG_ENABLED 0
|
|
#endif
|
|
// <o> NRFX_SPIS_CONFIG_LOG_LEVEL - Default Severity level
|
|
|
|
// <0=> Off
|
|
// <1=> Error
|
|
// <2=> Warning
|
|
// <3=> Info
|
|
// <4=> Debug
|
|
|
|
#ifndef NRFX_SPIS_CONFIG_LOG_LEVEL
|
|
#define NRFX_SPIS_CONFIG_LOG_LEVEL 3
|
|
#endif
|
|
|
|
// <o> NRFX_SPIS_CONFIG_INFO_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red <
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef NRFX_SPIS_CONFIG_INFO_COLOR
|
|
#define NRFX_SPIS_CONFIG_INFO_COLOR 0
|
|
#endif
|
|
|
|
// <o> NRFX_SPIS_CONFIG_DEBUG_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef NRFX_SPIS_CONFIG_DEBUG_COLOR
|
|
#define NRFX_SPIS_CONFIG_DEBUG_COLOR 0
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// <q> NRFX_SPIS_NRF52_ANOMALY_109_WORKAROUND_ENABLED - Enables nRF52 Anomaly 109 workaround for SPIS.
|
|
|
|
// <i> The workaround uses a GPIOTE channel to generate interrupts
|
|
// <i> on falling edges detected on the CSN line. This will make
|
|
// <i> the CPU active for the moment when SPIS starts DMA transfers,
|
|
// <i> and this way the transfers will be protected.
|
|
// <i> This workaround uses GPIOTE driver, so this driver must be
|
|
// <i> enabled as well.
|
|
|
|
#ifndef NRFX_SPIS_NRF52_ANOMALY_109_WORKAROUND_ENABLED
|
|
#define NRFX_SPIS_NRF52_ANOMALY_109_WORKAROUND_ENABLED 0
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// <e> NRFX_SPI_ENABLED - nrfx_spi - SPI peripheral driver
|
|
//==========================================================
|
|
#ifndef NRFX_SPI_ENABLED
|
|
#define NRFX_SPI_ENABLED 0
|
|
#endif
|
|
// <q> NRFX_SPI0_ENABLED - Enable SPI0 instance
|
|
|
|
#ifndef NRFX_SPI0_ENABLED
|
|
#define NRFX_SPI0_ENABLED 0
|
|
#endif
|
|
|
|
// <q> NRFX_SPI1_ENABLED - Enable SPI1 instance
|
|
|
|
#ifndef NRFX_SPI1_ENABLED
|
|
#define NRFX_SPI1_ENABLED 0
|
|
#endif
|
|
|
|
// <q> NRFX_SPI2_ENABLED - Enable SPI2 instance
|
|
|
|
#ifndef NRFX_SPI2_ENABLED
|
|
#define NRFX_SPI2_ENABLED 0
|
|
#endif
|
|
|
|
// <o> NRFX_SPI_MISO_PULL_CFG - MISO pin pull configuration.
|
|
|
|
// <0=> NRF_GPIO_PIN_NOPULL
|
|
// <1=> NRF_GPIO_PIN_PULLDOWN
|
|
// <3=> NRF_GPIO_PIN_PULLUP
|
|
|
|
#ifndef NRFX_SPI_MISO_PULL_CFG
|
|
#define NRFX_SPI_MISO_PULL_CFG 1
|
|
#endif
|
|
|
|
// <o> NRFX_SPI_DEFAULT_CONFIG_IRQ_PRIORITY - Interrupt priority
|
|
|
|
// <0=> 0 (highest)
|
|
// <1=> 1
|
|
// <2=> 2
|
|
// <3=> 3
|
|
// <4=> 4
|
|
// <5=> 5
|
|
// <6=> 6
|
|
// <7=> 7
|
|
|
|
#ifndef NRFX_SPI_DEFAULT_CONFIG_IRQ_PRIORITY
|
|
#define NRFX_SPI_DEFAULT_CONFIG_IRQ_PRIORITY 6
|
|
#endif
|
|
|
|
// <e> NRFX_SPI_CONFIG_LOG_ENABLED - Enables logging in the module.
|
|
//==========================================================
|
|
#ifndef NRFX_SPI_CONFIG_LOG_ENABLED
|
|
#define NRFX_SPI_CONFIG_LOG_ENABLED 0
|
|
#endif
|
|
// <o> NRFX_SPI_CONFIG_LOG_LEVEL - Default Severity level
|
|
|
|
// <0=> Off
|
|
// <1=> Error
|
|
// <2=> Warning
|
|
// <3=> Info
|
|
// <4=> Debug
|
|
|
|
#ifndef NRFX_SPI_CONFIG_LOG_LEVEL
|
|
#define NRFX_SPI_CONFIG_LOG_LEVEL 3
|
|
#endif
|
|
|
|
// <o> NRFX_SPI_CONFIG_INFO_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef NRFX_SPI_CONFIG_INFO_COLOR
|
|
#define NRFX_SPI_CONFIG_INFO_COLOR 0
|
|
#endif
|
|
|
|
// <o> NRFX_SPI_CONFIG_DEBUG_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef NRFX_SPI_CONFIG_DEBUG_COLOR
|
|
#define NRFX_SPI_CONFIG_DEBUG_COLOR 0
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// </e>
|
|
|
|
// <e> NRFX_SWI_ENABLED - nrfx_swi - SWI/EGU peripheral allocator
|
|
//==========================================================
|
|
#ifndef NRFX_SWI_ENABLED
|
|
#define NRFX_SWI_ENABLED 0
|
|
#endif
|
|
// <q> NRFX_EGU_ENABLED - Enable EGU support
|
|
|
|
#ifndef NRFX_EGU_ENABLED
|
|
#define NRFX_EGU_ENABLED 0
|
|
#endif
|
|
|
|
// <q> NRFX_SWI0_DISABLED - Exclude SWI0 from being utilized by the driver
|
|
|
|
#ifndef NRFX_SWI0_DISABLED
|
|
#define NRFX_SWI0_DISABLED 0
|
|
#endif
|
|
|
|
// <q> NRFX_SWI1_DISABLED - Exclude SWI1 from being utilized by the driver
|
|
|
|
#ifndef NRFX_SWI1_DISABLED
|
|
#define NRFX_SWI1_DISABLED 0
|
|
#endif
|
|
|
|
// <q> NRFX_SWI2_DISABLED - Exclude SWI2 from being utilized by the driver
|
|
|
|
#ifndef NRFX_SWI2_DISABLED
|
|
#define NRFX_SWI2_DISABLED 0
|
|
#endif
|
|
|
|
// <q> NRFX_SWI3_DISABLED - Exclude SWI3 from being utilized by the driver
|
|
|
|
#ifndef NRFX_SWI3_DISABLED
|
|
#define NRFX_SWI3_DISABLED 0
|
|
#endif
|
|
|
|
// <q> NRFX_SWI4_DISABLED - Exclude SWI4 from being utilized by the driver
|
|
|
|
#ifndef NRFX_SWI4_DISABLED
|
|
#define NRFX_SWI4_DISABLED 0
|
|
#endif
|
|
|
|
// <q> NRFX_SWI5_DISABLED - Exclude SWI5 from being utilized by the driver
|
|
|
|
#ifndef NRFX_SWI5_DISABLED
|
|
#define NRFX_SWI5_DISABLED 0
|
|
#endif
|
|
|
|
// <e> NRFX_SWI_CONFIG_LOG_ENABLED - Enables logging in the module.
|
|
//==========================================================
|
|
#ifndef NRFX_SWI_CONFIG_LOG_ENABLED
|
|
#define NRFX_SWI_CONFIG_LOG_ENABLED 0
|
|
#endif
|
|
// <o> NRFX_SWI_CONFIG_LOG_LEVEL - Default Severity level
|
|
|
|
// <0=> Off
|
|
// <1=> Error
|
|
// <2=> Warning
|
|
// <3=> Info
|
|
// <4=> Debug
|
|
|
|
#ifndef NRFX_SWI_CONFIG_LOG_LEVEL
|
|
#define NRFX_SWI_CONFIG_LOG_LEVEL 3
|
|
#endif
|
|
|
|
// <o> NRFX_SWI_CONFIG_INFO_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef NRFX_SWI_CONFIG_INFO_COLOR
|
|
#define NRFX_SWI_CONFIG_INFO_COLOR 0
|
|
#endif
|
|
|
|
// <o> NRFX_SWI_CONFIG_DEBUG_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef NRFX_SWI_CONFIG_DEBUG_COLOR
|
|
#define NRFX_SWI_CONFIG_DEBUG_COLOR 0
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// </e>
|
|
|
|
// <e> NRFX_TIMER_ENABLED - nrfx_timer - TIMER periperal driver
|
|
//==========================================================
|
|
#ifndef NRFX_TIMER_ENABLED
|
|
#define NRFX_TIMER_ENABLED 1
|
|
#endif
|
|
// <q> NRFX_TIMER0_ENABLED - Enable TIMER0 instance
|
|
|
|
#ifndef NRFX_TIMER0_ENABLED
|
|
#define NRFX_TIMER0_ENABLED 1
|
|
#endif
|
|
|
|
// <q> NRFX_TIMER1_ENABLED - Enable TIMER1 instance
|
|
|
|
#ifndef NRFX_TIMER1_ENABLED
|
|
#define NRFX_TIMER1_ENABLED 0
|
|
#endif
|
|
|
|
// <q> NRFX_TIMER2_ENABLED - Enable TIMER2 instance
|
|
|
|
#ifndef NRFX_TIMER2_ENABLED
|
|
#define NRFX_TIMER2_ENABLED 0
|
|
#endif
|
|
|
|
// <q> NRFX_TIMER3_ENABLED - Enable TIMER3 instance
|
|
|
|
#ifndef NRFX_TIMER3_ENABLED
|
|
#define NRFX_TIMER3_ENABLED 0
|
|
#endif
|
|
|
|
// <q> NRFX_TIMER4_ENABLED - Enable TIMER4 instance
|
|
|
|
#ifndef NRFX_TIMER4_ENABLED
|
|
#define NRFX_TIMER4_ENABLED 0
|
|
#endif
|
|
|
|
// <o> NRFX_TIMER_DEFAULT_CONFIG_FREQUENCY - Timer frequency if in Timer mode
|
|
|
|
// <0=> 16 MHz
|
|
// <1=> 8 MHz
|
|
// <2=> 4 MHz
|
|
// <3=> 2 MHz
|
|
// <4=> 1 MHz
|
|
// <5=> 500 kHz
|
|
// <6=> 250 kHz
|
|
// <7=> 125 kHz
|
|
// <8=> 62.5 kHz
|
|
// <9=> 31.25 kHz
|
|
|
|
#ifndef NRFX_TIMER_DEFAULT_CONFIG_FREQUENCY
|
|
#define NRFX_TIMER_DEFAULT_CONFIG_FREQUENCY 0
|
|
#endif
|
|
|
|
// <o> NRFX_TIMER_DEFAULT_CONFIG_MODE - Timer mode or operation
|
|
|
|
// <0=> Timer
|
|
// <1=> Counter
|
|
|
|
#ifndef NRFX_TIMER_DEFAULT_CONFIG_MODE
|
|
#define NRFX_TIMER_DEFAULT_CONFIG_MODE 0
|
|
#endif
|
|
|
|
// <o> NRFX_TIMER_DEFAULT_CONFIG_BIT_WIDTH - Timer counter bit width
|
|
|
|
// <0=> 16 bit
|
|
// <1=> 8 bit
|
|
// <2=> 24 bit
|
|
// <3=> 32 bit
|
|
|
|
#ifndef NRFX_TIMER_DEFAULT_CONFIG_BIT_WIDTH
|
|
#define NRFX_TIMER_DEFAULT_CONFIG_BIT_WIDTH 0
|
|
#endif
|
|
|
|
// <o> NRFX_TIMER_DEFAULT_CONFIG_IRQ_PRIORITY - Interrupt priority
|
|
|
|
// <0=> 0 (highest)
|
|
// <1=> 1
|
|
// <2=> 2
|
|
// <3=> 3
|
|
// <4=> 4
|
|
// <5=> 5
|
|
// <6=> 6
|
|
// <7=> 7
|
|
|
|
#ifndef NRFX_TIMER_DEFAULT_CONFIG_IRQ_PRIORITY
|
|
#define NRFX_TIMER_DEFAULT_CONFIG_IRQ_PRIORITY 6
|
|
#endif
|
|
|
|
// <e> NRFX_TIMER_CONFIG_LOG_ENABLED - Enables logging in the module.
|
|
//==========================================================
|
|
#ifndef NRFX_TIMER_CONFIG_LOG_ENABLED
|
|
#define NRFX_TIMER_CONFIG_LOG_ENABLED 0
|
|
#endif
|
|
// <o> NRFX_TIMER_CONFIG_LOG_LEVEL - Default Severity level
|
|
|
|
// <0=> Off
|
|
// <1=> Error
|
|
// <2=> Warning
|
|
// <3=> Info
|
|
// <4=> Debug
|
|
|
|
#ifndef NRFX_TIMER_CONFIG_LOG_LEVEL
|
|
#define NRFX_TIMER_CONFIG_LOG_LEVEL 3
|
|
#endif
|
|
|
|
// <o> NRFX_TIMER_CONFIG_INFO_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef NRFX_TIMER_CONFIG_INFO_COLOR
|
|
#define NRFX_TIMER_CONFIG_INFO_COLOR 0
|
|
#endif
|
|
|
|
// <o> NRFX_TIMER_CONFIG_DEBUG_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef NRFX_TIMER_CONFIG_DEBUG_COLOR
|
|
#define NRFX_TIMER_CONFIG_DEBUG_COLOR 0
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// </e>
|
|
|
|
// <e> NRFX_TWIM_ENABLED - nrfx_twim - TWIM peripheral driver
|
|
//==========================================================
|
|
#ifndef NRFX_TWIM_ENABLED
|
|
#define NRFX_TWIM_ENABLED 1
|
|
#endif
|
|
// <q> NRFX_TWIM0_ENABLED - Enable TWIM0 instance
|
|
|
|
#ifndef NRFX_TWIM0_ENABLED
|
|
#define NRFX_TWIM0_ENABLED 0
|
|
#endif
|
|
|
|
// <q> NRFX_TWIM1_ENABLED - Enable TWIM1 instance
|
|
|
|
#ifndef NRFX_TWIM1_ENABLED
|
|
#define NRFX_TWIM1_ENABLED 1
|
|
#endif
|
|
|
|
// <o> NRFX_TWIM_DEFAULT_CONFIG_FREQUENCY - Frequency
|
|
|
|
// <26738688=> 100k
|
|
// <67108864=> 250k
|
|
// <104857600=> 400k
|
|
|
|
#ifndef NRFX_TWIM_DEFAULT_CONFIG_FREQUENCY
|
|
#define NRFX_TWIM_DEFAULT_CONFIG_FREQUENCY 26738688
|
|
#endif
|
|
|
|
// <q> NRFX_TWIM_DEFAULT_CONFIG_HOLD_BUS_UNINIT - Enables bus holding after uninit
|
|
|
|
#ifndef NRFX_TWIM_DEFAULT_CONFIG_HOLD_BUS_UNINIT
|
|
#define NRFX_TWIM_DEFAULT_CONFIG_HOLD_BUS_UNINIT 0
|
|
#endif
|
|
|
|
// <o> NRFX_TWIM_DEFAULT_CONFIG_IRQ_PRIORITY - Interrupt priority
|
|
|
|
// <0=> 0 (highest)
|
|
// <1=> 1
|
|
// <2=> 2
|
|
// <3=> 3
|
|
// <4=> 4
|
|
// <5=> 5
|
|
// <6=> 6
|
|
// <7=> 7
|
|
|
|
#ifndef NRFX_TWIM_DEFAULT_CONFIG_IRQ_PRIORITY
|
|
#define NRFX_TWIM_DEFAULT_CONFIG_IRQ_PRIORITY 6
|
|
#endif
|
|
|
|
// <e> NRFX_TWIM_CONFIG_LOG_ENABLED - Enables logging in the module.
|
|
//==========================================================
|
|
#ifndef NRFX_TWIM_CONFIG_LOG_ENABLED
|
|
#define NRFX_TWIM_CONFIG_LOG_ENABLED 0
|
|
#endif
|
|
// <o> NRFX_TWIM_CONFIG_LOG_LEVEL - Default Severity level
|
|
|
|
// <0=> Off
|
|
// <1=> Error
|
|
// <2=> Warning
|
|
// <3=> Info
|
|
// <4=> Debug
|
|
|
|
#ifndef NRFX_TWIM_CONFIG_LOG_LEVEL
|
|
#define NRFX_TWIM_CONFIG_LOG_LEVEL 3
|
|
#endif
|
|
|
|
// <o> NRFX_TWIM_CONFIG_INFO_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef NRFX_TWIM_CONFIG_INFO_COLOR
|
|
#define NRFX_TWIM_CONFIG_INFO_COLOR 0
|
|
#endif
|
|
|
|
// <o> NRFX_TWIM_CONFIG_DEBUG_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef NRFX_TWIM_CONFIG_DEBUG_COLOR
|
|
#define NRFX_TWIM_CONFIG_DEBUG_COLOR 0
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// <q> NRFX_TWIM_NRF52_ANOMALY_109_WORKAROUND_ENABLED - Enables nRF52 anomaly 109 workaround for TWIM.
|
|
|
|
// <i> The workaround uses interrupts to wake up the CPU by catching
|
|
// <i> the start event of zero-frequency transmission, clear the
|
|
// <i> peripheral, set desired frequency, start the peripheral, and
|
|
// <i> the proper transmission. See more in the Errata document or
|
|
// <i> Anomaly 109 Addendum located at https://infocenter.nordicsemi.com/
|
|
|
|
#ifndef NRFX_TWIM_NRF52_ANOMALY_109_WORKAROUND_ENABLED
|
|
#define NRFX_TWIM_NRF52_ANOMALY_109_WORKAROUND_ENABLED 0
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// <e> NRFX_TWIS_ENABLED - nrfx_twis - TWIS peripheral driver
|
|
//==========================================================
|
|
#ifndef NRFX_TWIS_ENABLED
|
|
#define NRFX_TWIS_ENABLED 0
|
|
#endif
|
|
// <q> NRFX_TWIS0_ENABLED - Enable TWIS0 instance
|
|
|
|
#ifndef NRFX_TWIS0_ENABLED
|
|
#define NRFX_TWIS0_ENABLED 0
|
|
#endif
|
|
|
|
// <q> NRFX_TWIS1_ENABLED - Enable TWIS1 instance
|
|
|
|
#ifndef NRFX_TWIS1_ENABLED
|
|
#define NRFX_TWIS1_ENABLED 0
|
|
#endif
|
|
|
|
// <q> NRFX_TWIS_ASSUME_INIT_AFTER_RESET_ONLY - Assume that any instance would be initialized only once
|
|
|
|
// <i> Optimization flag. Registers used by TWIS are shared by other peripherals. Normally, during initialization driver tries to clear all
|
|
// registers to known state before doing the initialization itself. This gives initialization safe procedure, no matter when it would be
|
|
// called. If you activate TWIS only once and do never uninitialize it - set this flag to 1 what gives more optimal code.
|
|
|
|
#ifndef NRFX_TWIS_ASSUME_INIT_AFTER_RESET_ONLY
|
|
#define NRFX_TWIS_ASSUME_INIT_AFTER_RESET_ONLY 0
|
|
#endif
|
|
|
|
// <q> NRFX_TWIS_NO_SYNC_MODE - Remove support for synchronous mode
|
|
|
|
// <i> Synchronous mode would be used in specific situations. And it uses some additional code and data memory to safely process state
|
|
// machine by polling it in status functions. If this functionality is not required it may be disabled to free some resources.
|
|
|
|
#ifndef NRFX_TWIS_NO_SYNC_MODE
|
|
#define NRFX_TWIS_NO_SYNC_MODE 0
|
|
#endif
|
|
|
|
// <o> NRFX_TWIS_DEFAULT_CONFIG_ADDR0 - Address0
|
|
#ifndef NRFX_TWIS_DEFAULT_CONFIG_ADDR0
|
|
#define NRFX_TWIS_DEFAULT_CONFIG_ADDR0 0
|
|
#endif
|
|
|
|
// <o> NRFX_TWIS_DEFAULT_CONFIG_ADDR1 - Address1
|
|
#ifndef NRFX_TWIS_DEFAULT_CONFIG_ADDR1
|
|
#define NRFX_TWIS_DEFAULT_CONFIG_ADDR1 0
|
|
#endif
|
|
|
|
// <o> NRFX_TWIS_DEFAULT_CONFIG_SCL_PULL - SCL pin pull configuration
|
|
|
|
// <0=> Disabled
|
|
// <1=> Pull down
|
|
// <3=> Pull up
|
|
|
|
#ifndef NRFX_TWIS_DEFAULT_CONFIG_SCL_PULL
|
|
#define NRFX_TWIS_DEFAULT_CONFIG_SCL_PULL 0
|
|
#endif
|
|
|
|
// <o> NRFX_TWIS_DEFAULT_CONFIG_SDA_PULL - SDA pin pull configuration
|
|
|
|
// <0=> Disabled
|
|
// <1=> Pull down
|
|
// <3=> Pull up
|
|
|
|
#ifndef NRFX_TWIS_DEFAULT_CONFIG_SDA_PULL
|
|
#define NRFX_TWIS_DEFAULT_CONFIG_SDA_PULL 0
|
|
#endif
|
|
|
|
// <o> NRFX_TWIS_DEFAULT_CONFIG_IRQ_PRIORITY - Interrupt priority
|
|
|
|
// <0=> 0 (highest)
|
|
// <1=> 1
|
|
// <2=> 2
|
|
// <3=> 3
|
|
// <4=> 4
|
|
// <5=> 5
|
|
// <6=> 6
|
|
// <7=> 7
|
|
|
|
#ifndef NRFX_TWIS_DEFAULT_CONFIG_IRQ_PRIORITY
|
|
#define NRFX_TWIS_DEFAULT_CONFIG_IRQ_PRIORITY 6
|
|
#endif
|
|
|
|
// <e> NRFX_TWIS_CONFIG_LOG_ENABLED - Enables logging in the module.
|
|
//==========================================================
|
|
#ifndef NRFX_TWIS_CONFIG_LOG_ENABLED
|
|
#define NRFX_TWIS_CONFIG_LOG_ENABLED 0
|
|
#endif
|
|
// <o> NRFX_TWIS_CONFIG_LOG_LEVEL - Default Severity level
|
|
|
|
// <0=> Off
|
|
// <1=> Error
|
|
// <2=> Warning
|
|
// <3=> Info
|
|
// <4=> Debug
|
|
|
|
#ifndef NRFX_TWIS_CONFIG_LOG_LEVEL
|
|
#define NRFX_TWIS_CONFIG_LOG_LEVEL 3
|
|
#endif
|
|
|
|
// <o> NRFX_TWIS_CONFIG_INFO_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef NRFX_TWIS_CONFIG_INFO_COLOR
|
|
#define NRFX_TWIS_CONFIG_INFO_COLOR 0
|
|
#endif
|
|
|
|
// <o> NRFX_TWIS_CONFIG_DEBUG_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef NRFX_TWIS_CONFIG_DEBUG_COLOR
|
|
#define NRFX_TWIS_CONFIG_DEBUG_COLOR 0
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// </e>
|
|
|
|
// <e> NRFX_TWI_ENABLED - nrfx_twi - TWI peripheral driver
|
|
//==========================================================
|
|
#ifndef NRFX_TWI_ENABLED
|
|
#define NRFX_TWI_ENABLED 0
|
|
#endif
|
|
// <q> NRFX_TWI0_ENABLED - Enable TWI0 instance
|
|
|
|
#ifndef NRFX_TWI0_ENABLED
|
|
#define NRFX_TWI0_ENABLED 0
|
|
#endif
|
|
|
|
// <q> NRFX_TWI1_ENABLED - Enable TWI1 instance
|
|
|
|
#ifndef NRFX_TWI1_ENABLED
|
|
#define NRFX_TWI1_ENABLED 0
|
|
#endif
|
|
|
|
// <o> NRFX_TWI_DEFAULT_CONFIG_FREQUENCY - Frequency
|
|
|
|
// <26738688=> 100k
|
|
// <67108864=> 250k
|
|
// <104857600=> 400k
|
|
|
|
#ifndef NRFX_TWI_DEFAULT_CONFIG_FREQUENCY
|
|
#define NRFX_TWI_DEFAULT_CONFIG_FREQUENCY 26738688
|
|
#endif
|
|
|
|
// <q> NRFX_TWI_DEFAULT_CONFIG_HOLD_BUS_UNINIT - Enables bus holding after uninit
|
|
|
|
#ifndef NRFX_TWI_DEFAULT_CONFIG_HOLD_BUS_UNINIT
|
|
#define NRFX_TWI_DEFAULT_CONFIG_HOLD_BUS_UNINIT 0
|
|
#endif
|
|
|
|
// <o> NRFX_TWI_DEFAULT_CONFIG_IRQ_PRIORITY - Interrupt priority
|
|
|
|
// <0=> 0 (highest)
|
|
// <1=> 1
|
|
// <2=> 2
|
|
// <3=> 3
|
|
// <4=> 4
|
|
// <5=> 5
|
|
// <6=> 6
|
|
// <7=> 7
|
|
|
|
#ifndef NRFX_TWI_DEFAULT_CONFIG_IRQ_PRIORITY
|
|
#define NRFX_TWI_DEFAULT_CONFIG_IRQ_PRIORITY 6
|
|
#endif
|
|
|
|
// <e> NRFX_TWI_CONFIG_LOG_ENABLED - Enables logging in the module.
|
|
//==========================================================
|
|
#ifndef NRFX_TWI_CONFIG_LOG_ENABLED
|
|
#define NRFX_TWI_CONFIG_LOG_ENABLED 0
|
|
#endif
|
|
// <o> NRFX_TWI_CONFIG_LOG_LEVEL - Default Severity level
|
|
|
|
// <0=> Off
|
|
// <1=> Error
|
|
// <2=> Warning
|
|
// <3=> Info
|
|
// <4=> Debug
|
|
|
|
#ifndef NRFX_TWI_CONFIG_LOG_LEVEL
|
|
#define NRFX_TWI_CONFIG_LOG_LEVEL 3
|
|
#endif
|
|
|
|
// <o> NRFX_TWI_CONFIG_INFO_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef NRFX_TWI_CONFIG_INFO_COLOR
|
|
#define NRFX_TWI_CONFIG_INFO_COLOR 0
|
|
#endif
|
|
|
|
// <o> NRFX_TWI_CONFIG_DEBUG_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef NRFX_TWI_CONFIG_DEBUG_COLOR
|
|
#define NRFX_TWI_CONFIG_DEBUG_COLOR 0
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// </e>
|
|
|
|
// <e> NRFX_UARTE_ENABLED - nrfx_uarte - UARTE peripheral driver
|
|
//==========================================================
|
|
#ifndef NRFX_UARTE_ENABLED
|
|
#define NRFX_UARTE_ENABLED 0
|
|
#endif
|
|
// <o> NRFX_UARTE0_ENABLED - Enable UARTE0 instance
|
|
#ifndef NRFX_UARTE0_ENABLED
|
|
#define NRFX_UARTE0_ENABLED 0
|
|
#endif
|
|
|
|
// <o> NRFX_UARTE_DEFAULT_CONFIG_HWFC - Hardware Flow Control
|
|
|
|
// <0=> Disabled
|
|
// <1=> Enabled
|
|
|
|
#ifndef NRFX_UARTE_DEFAULT_CONFIG_HWFC
|
|
#define NRFX_UARTE_DEFAULT_CONFIG_HWFC 0
|
|
#endif
|
|
|
|
// <o> NRFX_UARTE_DEFAULT_CONFIG_PARITY - Parity
|
|
|
|
// <0=> Excluded
|
|
// <14=> Included
|
|
|
|
#ifndef NRFX_UARTE_DEFAULT_CONFIG_PARITY
|
|
#define NRFX_UARTE_DEFAULT_CONFIG_PARITY 0
|
|
#endif
|
|
|
|
// <o> NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE - Default Baudrate
|
|
|
|
// <323584=> 1200 baud
|
|
// <643072=> 2400 baud
|
|
// <1290240=> 4800 baud
|
|
// <2576384=> 9600 baud
|
|
// <3862528=> 14400 baud
|
|
// <5152768=> 19200 baud
|
|
// <7716864=> 28800 baud
|
|
// <8388608=> 31250 baud
|
|
// <10289152=> 38400 baud
|
|
// <15007744=> 56000 baud
|
|
// <15400960=> 57600 baud
|
|
// <20615168=> 76800 baud
|
|
// <30801920=> 115200 baud
|
|
// <61865984=> 230400 baud
|
|
// <67108864=> 250000 baud
|
|
// <121634816=> 460800 baud
|
|
// <251658240=> 921600 baud
|
|
// <268435456=> 1000000 baud
|
|
|
|
#ifndef NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE
|
|
#define NRFX_UARTE_DEFAULT_CONFIG_BAUDRATE 30801920
|
|
#endif
|
|
|
|
// <o> NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY - Interrupt priority
|
|
|
|
// <0=> 0 (highest)
|
|
// <1=> 1
|
|
// <2=> 2
|
|
// <3=> 3
|
|
// <4=> 4
|
|
// <5=> 5
|
|
// <6=> 6
|
|
// <7=> 7
|
|
|
|
#ifndef NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY
|
|
#define NRFX_UARTE_DEFAULT_CONFIG_IRQ_PRIORITY 6
|
|
#endif
|
|
|
|
// <e> NRFX_UARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
|
|
//==========================================================
|
|
#ifndef NRFX_UARTE_CONFIG_LOG_ENABLED
|
|
#define NRFX_UARTE_CONFIG_LOG_ENABLED 0
|
|
#endif
|
|
// <o> NRFX_UARTE_CONFIG_LOG_LEVEL - Default Severity level
|
|
|
|
// <0=> Off
|
|
// <1=> Error
|
|
// <2=> Warning
|
|
// <3=> Info
|
|
// <4=> Debug
|
|
|
|
#ifndef NRFX_UARTE_CONFIG_LOG_LEVEL
|
|
#define NRFX_UARTE_CONFIG_LOG_LEVEL 3
|
|
#endif
|
|
|
|
// <o> NRFX_UARTE_CONFIG_INFO_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef NRFX_UARTE_CONFIG_INFO_COLOR
|
|
#define NRFX_UARTE_CONFIG_INFO_COLOR 0
|
|
#endif
|
|
|
|
// <o> NRFX_UARTE_CONFIG_DEBUG_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef NRFX_UARTE_CONFIG_DEBUG_COLOR
|
|
#define NRFX_UARTE_CONFIG_DEBUG_COLOR 0
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// </e>
|
|
|
|
// <e> NRFX_UART_ENABLED - nrfx_uart - UART peripheral driver
|
|
//==========================================================
|
|
#ifndef NRFX_UART_ENABLED
|
|
#define NRFX_UART_ENABLED 0
|
|
#endif
|
|
// <o> NRFX_UART0_ENABLED - Enable UART0 instance
|
|
#ifndef NRFX_UART0_ENABLED
|
|
#define NRFX_UART0_ENABLED 0
|
|
#endif
|
|
|
|
// <o> NRFX_UART_DEFAULT_CONFIG_HWFC - Hardware Flow Control
|
|
|
|
// <0=> Disabled
|
|
// <1=> Enabled
|
|
|
|
#ifndef NRFX_UART_DEFAULT_CONFIG_HWFC
|
|
#define NRFX_UART_DEFAULT_CONFIG_HWFC 0
|
|
#endif
|
|
|
|
// <o> NRFX_UART_DEFAULT_CONFIG_PARITY - Parity
|
|
|
|
// <0=> Excluded
|
|
// <14=> Included
|
|
|
|
#ifndef NRFX_UART_DEFAULT_CONFIG_PARITY
|
|
#define NRFX_UART_DEFAULT_CONFIG_PARITY 0
|
|
#endif
|
|
|
|
// <o> NRFX_UART_DEFAULT_CONFIG_BAUDRATE - Default Baudrate
|
|
|
|
// <323584=> 1200 baud
|
|
// <643072=> 2400 baud
|
|
// <1290240=> 4800 baud
|
|
// <2576384=> 9600 baud
|
|
// <3866624=> 14400 baud
|
|
// <5152768=> 19200 baud
|
|
// <7729152=> 28800 baud
|
|
// <8388608=> 31250 baud
|
|
// <10309632=> 38400 baud
|
|
// <15007744=> 56000 baud
|
|
// <15462400=> 57600 baud
|
|
// <20615168=> 76800 baud
|
|
// <30924800=> 115200 baud
|
|
// <61845504=> 230400 baud
|
|
// <67108864=> 250000 baud
|
|
// <123695104=> 460800 baud
|
|
// <247386112=> 921600 baud
|
|
// <268435456=> 1000000 baud
|
|
|
|
#ifndef NRFX_UART_DEFAULT_CONFIG_BAUDRATE
|
|
#define NRFX_UART_DEFAULT_CONFIG_BAUDRATE 30924800
|
|
#endif
|
|
|
|
// <o> NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY - Interrupt priority
|
|
|
|
// <0=> 0 (highest)
|
|
// <1=> 1
|
|
// <2=> 2
|
|
// <3=> 3
|
|
// <4=> 4
|
|
// <5=> 5
|
|
// <6=> 6
|
|
// <7=> 7
|
|
|
|
#ifndef NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY
|
|
#define NRFX_UART_DEFAULT_CONFIG_IRQ_PRIORITY 6
|
|
#endif
|
|
|
|
// <e> NRFX_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
|
|
//==========================================================
|
|
#ifndef NRFX_UART_CONFIG_LOG_ENABLED
|
|
#define NRFX_UART_CONFIG_LOG_ENABLED 0
|
|
#endif
|
|
// <o> NRFX_UART_CONFIG_LOG_LEVEL - Default Severity level
|
|
|
|
// <0=> Off
|
|
// <1=> Error
|
|
// <2=> Warning
|
|
// <3=> Info
|
|
// <4=> Debug
|
|
|
|
#ifndef NRFX_UART_CONFIG_LOG_LEVEL
|
|
#define NRFX_UART_CONFIG_LOG_LEVEL 3
|
|
#endif
|
|
|
|
// <o> NRFX_UART_CONFIG_INFO_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef NRFX_UART_CONFIG_INFO_COLOR
|
|
#define NRFX_UART_CONFIG_INFO_COLOR 0
|
|
#endif
|
|
|
|
// <o> NRFX_UART_CONFIG_DEBUG_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef NRFX_UART_CONFIG_DEBUG_COLOR
|
|
#define NRFX_UART_CONFIG_DEBUG_COLOR 0
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// </e>
|
|
|
|
// <e> NRFX_WDT_ENABLED - nrfx_wdt - WDT peripheral driver
|
|
//==========================================================
|
|
#ifndef NRFX_WDT_ENABLED
|
|
#define NRFX_WDT_ENABLED 0
|
|
#endif
|
|
// <o> NRFX_WDT_CONFIG_BEHAVIOUR - WDT behavior in CPU SLEEP or HALT mode
|
|
|
|
// <1=> Run in SLEEP, Pause in HALT
|
|
// <8=> Pause in SLEEP, Run in HALT
|
|
// <9=> Run in SLEEP and HALT
|
|
// <0=> Pause in SLEEP and HALT
|
|
|
|
#ifndef NRFX_WDT_CONFIG_BEHAVIOUR
|
|
#define NRFX_WDT_CONFIG_BEHAVIOUR 1
|
|
#endif
|
|
|
|
// <o> NRFX_WDT_CONFIG_RELOAD_VALUE - Reload value <15-4294967295>
|
|
|
|
#ifndef NRFX_WDT_CONFIG_RELOAD_VALUE
|
|
#define NRFX_WDT_CONFIG_RELOAD_VALUE 2000
|
|
#endif
|
|
|
|
// <o> NRFX_WDT_CONFIG_NO_IRQ - Remove WDT IRQ handling from WDT driver
|
|
|
|
// <0=> Include WDT IRQ handling
|
|
// <1=> Remove WDT IRQ handling
|
|
|
|
#ifndef NRFX_WDT_CONFIG_NO_IRQ
|
|
#define NRFX_WDT_CONFIG_NO_IRQ 0
|
|
#endif
|
|
|
|
// <o> NRFX_WDT_CONFIG_IRQ_PRIORITY - Interrupt priority
|
|
|
|
// <0=> 0 (highest)
|
|
// <1=> 1
|
|
// <2=> 2
|
|
// <3=> 3
|
|
// <4=> 4
|
|
// <5=> 5
|
|
// <6=> 6
|
|
// <7=> 7
|
|
|
|
#ifndef NRFX_WDT_CONFIG_IRQ_PRIORITY
|
|
#define NRFX_WDT_CONFIG_IRQ_PRIORITY 6
|
|
#endif
|
|
|
|
// <e> NRFX_WDT_CONFIG_LOG_ENABLED - Enables logging in the module.
|
|
//==========================================================
|
|
#ifndef NRFX_WDT_CONFIG_LOG_ENABLED
|
|
#define NRFX_WDT_CONFIG_LOG_ENABLED 0
|
|
#endif
|
|
// <o> NRFX_WDT_CONFIG_LOG_LEVEL - Default Severity level
|
|
|
|
// <0=> Off
|
|
// <1=> Error
|
|
// <2=> Warning
|
|
// <3=> Info
|
|
// <4=> Debug
|
|
|
|
#ifndef NRFX_WDT_CONFIG_LOG_LEVEL
|
|
#define NRFX_WDT_CONFIG_LOG_LEVEL 3
|
|
#endif
|
|
|
|
// <o> NRFX_WDT_CONFIG_INFO_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef NRFX_WDT_CONFIG_INFO_COLOR
|
|
#define NRFX_WDT_CONFIG_INFO_COLOR 0
|
|
#endif
|
|
|
|
// <o> NRFX_WDT_CONFIG_DEBUG_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef NRFX_WDT_CONFIG_DEBUG_COLOR
|
|
#define NRFX_WDT_CONFIG_DEBUG_COLOR 0
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// </e>
|
|
|
|
// <e> NRF_CLOCK_ENABLED - nrf_drv_clock - CLOCK peripheral driver - legacy layer
|
|
//==========================================================
|
|
#ifndef NRF_CLOCK_ENABLED
|
|
#define NRF_CLOCK_ENABLED 1
|
|
#endif
|
|
// <o> CLOCK_CONFIG_LF_SRC - LF Clock Source
|
|
|
|
// <0=> RC
|
|
// <1=> XTAL
|
|
// <2=> Synth
|
|
// <131073=> External Low Swing
|
|
// <196609=> External Full Swing
|
|
|
|
#ifndef CLOCK_CONFIG_LF_SRC
|
|
#define CLOCK_CONFIG_LF_SRC 1
|
|
#endif
|
|
|
|
// <q> CLOCK_CONFIG_LF_CAL_ENABLED - Calibration enable for LF Clock Source
|
|
|
|
#ifndef CLOCK_CONFIG_LF_CAL_ENABLED
|
|
#define CLOCK_CONFIG_LF_CAL_ENABLED 0
|
|
#endif
|
|
|
|
// <o> CLOCK_CONFIG_IRQ_PRIORITY - Interrupt priority
|
|
|
|
// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
|
|
// <0=> 0 (highest)
|
|
// <1=> 1
|
|
// <2=> 2
|
|
// <3=> 3
|
|
// <4=> 4
|
|
// <5=> 5
|
|
// <6=> 6
|
|
// <7=> 7
|
|
|
|
#ifndef CLOCK_CONFIG_IRQ_PRIORITY
|
|
#define CLOCK_CONFIG_IRQ_PRIORITY 6
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// <e> PDM_ENABLED - nrf_drv_pdm - PDM peripheral driver - legacy layer
|
|
//==========================================================
|
|
#ifndef PDM_ENABLED
|
|
#define PDM_ENABLED 0
|
|
#endif
|
|
// <o> PDM_CONFIG_MODE - Mode
|
|
|
|
// <0=> Stereo
|
|
// <1=> Mono
|
|
|
|
#ifndef PDM_CONFIG_MODE
|
|
#define PDM_CONFIG_MODE 1
|
|
#endif
|
|
|
|
// <o> PDM_CONFIG_EDGE - Edge
|
|
|
|
// <0=> Left falling
|
|
// <1=> Left rising
|
|
|
|
#ifndef PDM_CONFIG_EDGE
|
|
#define PDM_CONFIG_EDGE 0
|
|
#endif
|
|
|
|
// <o> PDM_CONFIG_CLOCK_FREQ - Clock frequency
|
|
|
|
// <134217728=> 1000k
|
|
// <138412032=> 1032k (default)
|
|
// <142606336=> 1067k
|
|
|
|
#ifndef PDM_CONFIG_CLOCK_FREQ
|
|
#define PDM_CONFIG_CLOCK_FREQ 138412032
|
|
#endif
|
|
|
|
// <o> PDM_CONFIG_IRQ_PRIORITY - Interrupt priority
|
|
|
|
// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
|
|
// <0=> 0 (highest)
|
|
// <1=> 1
|
|
// <2=> 2
|
|
// <3=> 3
|
|
// <4=> 4
|
|
// <5=> 5
|
|
// <6=> 6
|
|
// <7=> 7
|
|
|
|
#ifndef PDM_CONFIG_IRQ_PRIORITY
|
|
#define PDM_CONFIG_IRQ_PRIORITY 6
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// <e> POWER_ENABLED - nrf_drv_power - POWER peripheral driver - legacy layer
|
|
//==========================================================
|
|
#ifndef POWER_ENABLED
|
|
#define POWER_ENABLED 0
|
|
#endif
|
|
// <o> POWER_CONFIG_IRQ_PRIORITY - Interrupt priority
|
|
|
|
// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
|
|
// <0=> 0 (highest)
|
|
// <1=> 1
|
|
// <2=> 2
|
|
// <3=> 3
|
|
// <4=> 4
|
|
// <5=> 5
|
|
// <6=> 6
|
|
// <7=> 7
|
|
|
|
#ifndef POWER_CONFIG_IRQ_PRIORITY
|
|
#define POWER_CONFIG_IRQ_PRIORITY 6
|
|
#endif
|
|
|
|
// <q> POWER_CONFIG_DEFAULT_DCDCEN - The default configuration of main DCDC regulator
|
|
|
|
// <i> This settings means only that components for DCDC regulator are installed and it can be enabled.
|
|
|
|
#ifndef POWER_CONFIG_DEFAULT_DCDCEN
|
|
#define POWER_CONFIG_DEFAULT_DCDCEN 0
|
|
#endif
|
|
|
|
// <q> POWER_CONFIG_DEFAULT_DCDCENHV - The default configuration of High Voltage DCDC regulator
|
|
|
|
// <i> This settings means only that components for DCDC regulator are installed and it can be enabled.
|
|
|
|
#ifndef POWER_CONFIG_DEFAULT_DCDCENHV
|
|
#define POWER_CONFIG_DEFAULT_DCDCENHV 0
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// <q> PPI_ENABLED - nrf_drv_ppi - PPI peripheral driver - legacy layer
|
|
|
|
#ifndef PPI_ENABLED
|
|
#define PPI_ENABLED 0
|
|
#endif
|
|
|
|
// <e> PWM_ENABLED - nrf_drv_pwm - PWM peripheral driver - legacy layer
|
|
//==========================================================
|
|
#ifndef PWM_ENABLED
|
|
#define PWM_ENABLED 0
|
|
#endif
|
|
// <o> PWM_DEFAULT_CONFIG_OUT0_PIN - Out0 pin <0-31>
|
|
|
|
#ifndef PWM_DEFAULT_CONFIG_OUT0_PIN
|
|
#define PWM_DEFAULT_CONFIG_OUT0_PIN 31
|
|
#endif
|
|
|
|
// <o> PWM_DEFAULT_CONFIG_OUT1_PIN - Out1 pin <0-31>
|
|
|
|
#ifndef PWM_DEFAULT_CONFIG_OUT1_PIN
|
|
#define PWM_DEFAULT_CONFIG_OUT1_PIN 31
|
|
#endif
|
|
|
|
// <o> PWM_DEFAULT_CONFIG_OUT2_PIN - Out2 pin <0-31>
|
|
|
|
#ifndef PWM_DEFAULT_CONFIG_OUT2_PIN
|
|
#define PWM_DEFAULT_CONFIG_OUT2_PIN 31
|
|
#endif
|
|
|
|
// <o> PWM_DEFAULT_CONFIG_OUT3_PIN - Out3 pin <0-31>
|
|
|
|
#ifndef PWM_DEFAULT_CONFIG_OUT3_PIN
|
|
#define PWM_DEFAULT_CONFIG_OUT3_PIN 31
|
|
#endif
|
|
|
|
// <o> PWM_DEFAULT_CONFIG_BASE_CLOCK - Base clock
|
|
|
|
// <0=> 16 MHz
|
|
// <1=> 8 MHz
|
|
// <2=> 4 MHz
|
|
// <3=> 2 MHz
|
|
// <4=> 1 MHz
|
|
// <5=> 500 kHz
|
|
// <6=> 250 kHz
|
|
// <7=> 125 kHz
|
|
|
|
#ifndef PWM_DEFAULT_CONFIG_BASE_CLOCK
|
|
#define PWM_DEFAULT_CONFIG_BASE_CLOCK 4
|
|
#endif
|
|
|
|
// <o> PWM_DEFAULT_CONFIG_COUNT_MODE - Count mode
|
|
|
|
// <0=> Up
|
|
// <1=> Up and Down
|
|
|
|
#ifndef PWM_DEFAULT_CONFIG_COUNT_MODE
|
|
#define PWM_DEFAULT_CONFIG_COUNT_MODE 0
|
|
#endif
|
|
|
|
// <o> PWM_DEFAULT_CONFIG_TOP_VALUE - Top value
|
|
#ifndef PWM_DEFAULT_CONFIG_TOP_VALUE
|
|
#define PWM_DEFAULT_CONFIG_TOP_VALUE 1000
|
|
#endif
|
|
|
|
// <o> PWM_DEFAULT_CONFIG_LOAD_MODE - Load mode
|
|
|
|
// <0=> Common
|
|
// <1=> Grouped
|
|
// <2=> Individual
|
|
// <3=> Waveform
|
|
|
|
#ifndef PWM_DEFAULT_CONFIG_LOAD_MODE
|
|
#define PWM_DEFAULT_CONFIG_LOAD_MODE 0
|
|
#endif
|
|
|
|
// <o> PWM_DEFAULT_CONFIG_STEP_MODE - Step mode
|
|
|
|
// <0=> Auto
|
|
// <1=> Triggered
|
|
|
|
#ifndef PWM_DEFAULT_CONFIG_STEP_MODE
|
|
#define PWM_DEFAULT_CONFIG_STEP_MODE 0
|
|
#endif
|
|
|
|
// <o> PWM_DEFAULT_CONFIG_IRQ_PRIORITY - Interrupt priority
|
|
|
|
// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
|
|
// <0=> 0 (highest)
|
|
// <1=> 1
|
|
// <2=> 2
|
|
// <3=> 3
|
|
// <4=> 4
|
|
// <5=> 5
|
|
// <6=> 6
|
|
// <7=> 7
|
|
|
|
#ifndef PWM_DEFAULT_CONFIG_IRQ_PRIORITY
|
|
#define PWM_DEFAULT_CONFIG_IRQ_PRIORITY 6
|
|
#endif
|
|
|
|
// <q> PWM0_ENABLED - Enable PWM0 instance
|
|
|
|
#ifndef PWM0_ENABLED
|
|
#define PWM0_ENABLED 0
|
|
#endif
|
|
|
|
// <q> PWM1_ENABLED - Enable PWM1 instance
|
|
|
|
#ifndef PWM1_ENABLED
|
|
#define PWM1_ENABLED 0
|
|
#endif
|
|
|
|
// <q> PWM2_ENABLED - Enable PWM2 instance
|
|
|
|
#ifndef PWM2_ENABLED
|
|
#define PWM2_ENABLED 0
|
|
#endif
|
|
|
|
// <e> PWM_NRF52_ANOMALY_109_WORKAROUND_ENABLED - Enables nRF52 Anomaly 109 workaround for PWM.
|
|
|
|
// <i> The workaround uses interrupts to wake up the CPU and ensure
|
|
// <i> it is active when PWM is about to start a DMA transfer. For
|
|
// <i> initial transfer, done when a playback is started via PPI,
|
|
// <i> a specific EGU instance is used to generate the interrupt.
|
|
// <i> During the playback, the PWM interrupt triggered on SEQEND
|
|
// <i> event of a preceding sequence is used to protect the transfer
|
|
// <i> done for the next sequence to be played.
|
|
//==========================================================
|
|
#ifndef PWM_NRF52_ANOMALY_109_WORKAROUND_ENABLED
|
|
#define PWM_NRF52_ANOMALY_109_WORKAROUND_ENABLED 0
|
|
#endif
|
|
// <o> PWM_NRF52_ANOMALY_109_EGU_INSTANCE - EGU instance used by the nRF52 Anomaly 109 workaround for PWM.
|
|
|
|
// <0=> EGU0
|
|
// <1=> EGU1
|
|
// <2=> EGU2
|
|
// <3=> EGU3
|
|
// <4=> EGU4
|
|
// <5=> EGU5
|
|
|
|
#ifndef PWM_NRF52_ANOMALY_109_EGU_INSTANCE
|
|
#define PWM_NRF52_ANOMALY_109_EGU_INSTANCE 5
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// </e>
|
|
|
|
// <e> QDEC_ENABLED - nrf_drv_qdec - QDEC peripheral driver - legacy layer
|
|
//==========================================================
|
|
#ifndef QDEC_ENABLED
|
|
#define QDEC_ENABLED 0
|
|
#endif
|
|
// <o> QDEC_CONFIG_REPORTPER - Report period
|
|
|
|
// <0=> 10 Samples
|
|
// <1=> 40 Samples
|
|
// <2=> 80 Samples
|
|
// <3=> 120 Samples
|
|
// <4=> 160 Samples
|
|
// <5=> 200 Samples
|
|
// <6=> 240 Samples
|
|
// <7=> 280 Samples
|
|
|
|
#ifndef QDEC_CONFIG_REPORTPER
|
|
#define QDEC_CONFIG_REPORTPER 0
|
|
#endif
|
|
|
|
// <o> QDEC_CONFIG_SAMPLEPER - Sample period
|
|
|
|
// <0=> 128 us
|
|
// <1=> 256 us
|
|
// <2=> 512 us
|
|
// <3=> 1024 us
|
|
// <4=> 2048 us
|
|
// <5=> 4096 us
|
|
// <6=> 8192 us
|
|
// <7=> 16384 us
|
|
|
|
#ifndef QDEC_CONFIG_SAMPLEPER
|
|
#define QDEC_CONFIG_SAMPLEPER 7
|
|
#endif
|
|
|
|
// <o> QDEC_CONFIG_PIO_A - A pin <0-31>
|
|
|
|
#ifndef QDEC_CONFIG_PIO_A
|
|
#define QDEC_CONFIG_PIO_A 31
|
|
#endif
|
|
|
|
// <o> QDEC_CONFIG_PIO_B - B pin <0-31>
|
|
|
|
#ifndef QDEC_CONFIG_PIO_B
|
|
#define QDEC_CONFIG_PIO_B 31
|
|
#endif
|
|
|
|
// <o> QDEC_CONFIG_PIO_LED - LED pin <0-31>
|
|
|
|
#ifndef QDEC_CONFIG_PIO_LED
|
|
#define QDEC_CONFIG_PIO_LED 31
|
|
#endif
|
|
|
|
// <o> QDEC_CONFIG_LEDPRE - LED pre
|
|
#ifndef QDEC_CONFIG_LEDPRE
|
|
#define QDEC_CONFIG_LEDPRE 511
|
|
#endif
|
|
|
|
// <o> QDEC_CONFIG_LEDPOL - LED polarity
|
|
|
|
// <0=> Active low
|
|
// <1=> Active high
|
|
|
|
#ifndef QDEC_CONFIG_LEDPOL
|
|
#define QDEC_CONFIG_LEDPOL 1
|
|
#endif
|
|
|
|
// <q> QDEC_CONFIG_DBFEN - Debouncing enable
|
|
|
|
#ifndef QDEC_CONFIG_DBFEN
|
|
#define QDEC_CONFIG_DBFEN 0
|
|
#endif
|
|
|
|
// <q> QDEC_CONFIG_SAMPLE_INTEN - Sample ready interrupt enable
|
|
|
|
#ifndef QDEC_CONFIG_SAMPLE_INTEN
|
|
#define QDEC_CONFIG_SAMPLE_INTEN 0
|
|
#endif
|
|
|
|
// <o> QDEC_CONFIG_IRQ_PRIORITY - Interrupt priority
|
|
|
|
// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
|
|
// <0=> 0 (highest)
|
|
// <1=> 1
|
|
// <2=> 2
|
|
// <3=> 3
|
|
// <4=> 4
|
|
// <5=> 5
|
|
// <6=> 6
|
|
// <7=> 7
|
|
|
|
#ifndef QDEC_CONFIG_IRQ_PRIORITY
|
|
#define QDEC_CONFIG_IRQ_PRIORITY 6
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// <e> QSPI_ENABLED - nrf_drv_qspi - QSPI peripheral driver - legacy layer
|
|
//==========================================================
|
|
#ifndef QSPI_ENABLED
|
|
#define QSPI_ENABLED 0
|
|
#endif
|
|
// <o> QSPI_CONFIG_SCK_DELAY - tSHSL, tWHSL and tSHWL in number of 16 MHz periods (62.5 ns). <0-255>
|
|
|
|
#ifndef QSPI_CONFIG_SCK_DELAY
|
|
#define QSPI_CONFIG_SCK_DELAY 1
|
|
#endif
|
|
|
|
// <o> QSPI_CONFIG_XIP_OFFSET - Address offset in the external memory for Execute in Place operation.
|
|
#ifndef QSPI_CONFIG_XIP_OFFSET
|
|
#define QSPI_CONFIG_XIP_OFFSET 0
|
|
#endif
|
|
|
|
// <o> QSPI_CONFIG_READOC - Number of data lines and opcode used for reading.
|
|
|
|
// <0=> FastRead
|
|
// <1=> Read2O
|
|
// <2=> Read2IO
|
|
// <3=> Read4O
|
|
// <4=> Read4IO
|
|
|
|
#ifndef QSPI_CONFIG_READOC
|
|
#define QSPI_CONFIG_READOC 0
|
|
#endif
|
|
|
|
// <o> QSPI_CONFIG_WRITEOC - Number of data lines and opcode used for writing.
|
|
|
|
// <0=> PP
|
|
// <1=> PP2O
|
|
// <2=> PP4O
|
|
// <3=> PP4IO
|
|
|
|
#ifndef QSPI_CONFIG_WRITEOC
|
|
#define QSPI_CONFIG_WRITEOC 0
|
|
#endif
|
|
|
|
// <o> QSPI_CONFIG_ADDRMODE - Addressing mode.
|
|
|
|
// <0=> 24bit
|
|
// <1=> 32bit
|
|
|
|
#ifndef QSPI_CONFIG_ADDRMODE
|
|
#define QSPI_CONFIG_ADDRMODE 0
|
|
#endif
|
|
|
|
// <o> QSPI_CONFIG_MODE - SPI mode.
|
|
|
|
// <0=> Mode 0
|
|
// <1=> Mode 1
|
|
|
|
#ifndef QSPI_CONFIG_MODE
|
|
#define QSPI_CONFIG_MODE 0
|
|
#endif
|
|
|
|
// <o> QSPI_CONFIG_FREQUENCY - Frequency divider.
|
|
|
|
// <0=> 32MHz/1
|
|
// <1=> 32MHz/2
|
|
// <2=> 32MHz/3
|
|
// <3=> 32MHz/4
|
|
// <4=> 32MHz/5
|
|
// <5=> 32MHz/6
|
|
// <6=> 32MHz/7
|
|
// <7=> 32MHz/8
|
|
// <8=> 32MHz/9
|
|
// <9=> 32MHz/10
|
|
// <10=> 32MHz/11
|
|
// <11=> 32MHz/12
|
|
// <12=> 32MHz/13
|
|
// <13=> 32MHz/14
|
|
// <14=> 32MHz/15
|
|
// <15=> 32MHz/16
|
|
|
|
#ifndef QSPI_CONFIG_FREQUENCY
|
|
#define QSPI_CONFIG_FREQUENCY 15
|
|
#endif
|
|
|
|
// <s> QSPI_PIN_SCK - SCK pin value.
|
|
#ifndef QSPI_PIN_SCK
|
|
#define QSPI_PIN_SCK NRF_QSPI_PIN_NOT_CONNECTED
|
|
#endif
|
|
|
|
// <s> QSPI_PIN_CSN - CSN pin value.
|
|
#ifndef QSPI_PIN_CSN
|
|
#define QSPI_PIN_CSN NRF_QSPI_PIN_NOT_CONNECTED
|
|
#endif
|
|
|
|
// <s> QSPI_PIN_IO0 - IO0 pin value.
|
|
#ifndef QSPI_PIN_IO0
|
|
#define QSPI_PIN_IO0 NRF_QSPI_PIN_NOT_CONNECTED
|
|
#endif
|
|
|
|
// <s> QSPI_PIN_IO1 - IO1 pin value.
|
|
#ifndef QSPI_PIN_IO1
|
|
#define QSPI_PIN_IO1 NRF_QSPI_PIN_NOT_CONNECTED
|
|
#endif
|
|
|
|
// <s> QSPI_PIN_IO2 - IO2 pin value.
|
|
#ifndef QSPI_PIN_IO2
|
|
#define QSPI_PIN_IO2 NRF_QSPI_PIN_NOT_CONNECTED
|
|
#endif
|
|
|
|
// <s> QSPI_PIN_IO3 - IO3 pin value.
|
|
#ifndef QSPI_PIN_IO3
|
|
#define QSPI_PIN_IO3 NRF_QSPI_PIN_NOT_CONNECTED
|
|
#endif
|
|
|
|
// <o> QSPI_CONFIG_IRQ_PRIORITY - Interrupt priority
|
|
|
|
// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
|
|
// <0=> 0 (highest)
|
|
// <1=> 1
|
|
// <2=> 2
|
|
// <3=> 3
|
|
// <4=> 4
|
|
// <5=> 5
|
|
// <6=> 6
|
|
// <7=> 7
|
|
|
|
#ifndef QSPI_CONFIG_IRQ_PRIORITY
|
|
#define QSPI_CONFIG_IRQ_PRIORITY 6
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// <e> RNG_ENABLED - nrf_drv_rng - RNG peripheral driver - legacy layer
|
|
//==========================================================
|
|
#ifndef RNG_ENABLED
|
|
#define RNG_ENABLED 0
|
|
#endif
|
|
// <q> RNG_CONFIG_ERROR_CORRECTION - Error correction
|
|
|
|
#ifndef RNG_CONFIG_ERROR_CORRECTION
|
|
#define RNG_CONFIG_ERROR_CORRECTION 1
|
|
#endif
|
|
|
|
// <o> RNG_CONFIG_POOL_SIZE - Pool size
|
|
#ifndef RNG_CONFIG_POOL_SIZE
|
|
#define RNG_CONFIG_POOL_SIZE 64
|
|
#endif
|
|
|
|
// <o> RNG_CONFIG_IRQ_PRIORITY - Interrupt priority
|
|
|
|
// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
|
|
// <0=> 0 (highest)
|
|
// <1=> 1
|
|
// <2=> 2
|
|
// <3=> 3
|
|
// <4=> 4
|
|
// <5=> 5
|
|
// <6=> 6
|
|
// <7=> 7
|
|
|
|
#ifndef RNG_CONFIG_IRQ_PRIORITY
|
|
#define RNG_CONFIG_IRQ_PRIORITY 6
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// <e> RTC_ENABLED - nrf_drv_rtc - RTC peripheral driver - legacy layer
|
|
//==========================================================
|
|
#ifndef RTC_ENABLED
|
|
#define RTC_ENABLED 0
|
|
#endif
|
|
// <o> RTC_DEFAULT_CONFIG_FREQUENCY - Frequency <16-32768>
|
|
|
|
#ifndef RTC_DEFAULT_CONFIG_FREQUENCY
|
|
#define RTC_DEFAULT_CONFIG_FREQUENCY 32768
|
|
#endif
|
|
|
|
// <q> RTC_DEFAULT_CONFIG_RELIABLE - Ensures safe compare event triggering
|
|
|
|
#ifndef RTC_DEFAULT_CONFIG_RELIABLE
|
|
#define RTC_DEFAULT_CONFIG_RELIABLE 0
|
|
#endif
|
|
|
|
// <o> RTC_DEFAULT_CONFIG_IRQ_PRIORITY - Interrupt priority
|
|
|
|
// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
|
|
// <0=> 0 (highest)
|
|
// <1=> 1
|
|
// <2=> 2
|
|
// <3=> 3
|
|
// <4=> 4
|
|
// <5=> 5
|
|
// <6=> 6
|
|
// <7=> 7
|
|
|
|
#ifndef RTC_DEFAULT_CONFIG_IRQ_PRIORITY
|
|
#define RTC_DEFAULT_CONFIG_IRQ_PRIORITY 6
|
|
#endif
|
|
|
|
// <q> RTC0_ENABLED - Enable RTC0 instance
|
|
|
|
#ifndef RTC0_ENABLED
|
|
#define RTC0_ENABLED 0
|
|
#endif
|
|
|
|
// <q> RTC1_ENABLED - Enable RTC1 instance
|
|
|
|
#ifndef RTC1_ENABLED
|
|
#define RTC1_ENABLED 0
|
|
#endif
|
|
|
|
// <q> RTC2_ENABLED - Enable RTC2 instance
|
|
|
|
#ifndef RTC2_ENABLED
|
|
#define RTC2_ENABLED 0
|
|
#endif
|
|
|
|
// <o> NRF_MAXIMUM_LATENCY_US - Maximum possible time[us] in highest priority interrupt
|
|
#ifndef NRF_MAXIMUM_LATENCY_US
|
|
#define NRF_MAXIMUM_LATENCY_US 2000
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// <e> SAADC_ENABLED - nrf_drv_saadc - SAADC peripheral driver - legacy layer
|
|
//==========================================================
|
|
#ifndef SAADC_ENABLED
|
|
#define SAADC_ENABLED 1
|
|
#endif
|
|
// <o> SAADC_CONFIG_RESOLUTION - Resolution
|
|
|
|
// <0=> 8 bit
|
|
// <1=> 10 bit
|
|
// <2=> 12 bit
|
|
// <3=> 14 bit
|
|
|
|
#ifndef SAADC_CONFIG_RESOLUTION
|
|
#define SAADC_CONFIG_RESOLUTION 1
|
|
#endif
|
|
|
|
// <o> SAADC_CONFIG_OVERSAMPLE - Sample period
|
|
|
|
// <0=> Disabled
|
|
// <1=> 2x
|
|
// <2=> 4x
|
|
// <3=> 8x
|
|
// <4=> 16x
|
|
// <5=> 32x
|
|
// <6=> 64x
|
|
// <7=> 128x
|
|
// <8=> 256x
|
|
|
|
#ifndef SAADC_CONFIG_OVERSAMPLE
|
|
#define SAADC_CONFIG_OVERSAMPLE 0
|
|
#endif
|
|
|
|
// <q> SAADC_CONFIG_LP_MODE - Enabling low power mode
|
|
|
|
#ifndef SAADC_CONFIG_LP_MODE
|
|
#define SAADC_CONFIG_LP_MODE 0
|
|
#endif
|
|
|
|
// <o> SAADC_CONFIG_IRQ_PRIORITY - Interrupt priority
|
|
|
|
// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
|
|
// <0=> 0 (highest)
|
|
// <1=> 1
|
|
// <2=> 2
|
|
// <3=> 3
|
|
// <4=> 4
|
|
// <5=> 5
|
|
// <6=> 6
|
|
// <7=> 7
|
|
|
|
#ifndef SAADC_CONFIG_IRQ_PRIORITY
|
|
#define SAADC_CONFIG_IRQ_PRIORITY 6
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// <e> SPIS_ENABLED - nrf_drv_spis - SPIS peripheral driver - legacy layer
|
|
//==========================================================
|
|
#ifndef SPIS_ENABLED
|
|
#define SPIS_ENABLED 0
|
|
#endif
|
|
// <o> SPIS_DEFAULT_CONFIG_IRQ_PRIORITY - Interrupt priority
|
|
|
|
// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
|
|
// <0=> 0 (highest)
|
|
// <1=> 1
|
|
// <2=> 2
|
|
// <3=> 3
|
|
// <4=> 4
|
|
// <5=> 5
|
|
// <6=> 6
|
|
// <7=> 7
|
|
|
|
#ifndef SPIS_DEFAULT_CONFIG_IRQ_PRIORITY
|
|
#define SPIS_DEFAULT_CONFIG_IRQ_PRIORITY 6
|
|
#endif
|
|
|
|
// <o> SPIS_DEFAULT_MODE - Mode
|
|
|
|
// <0=> MODE_0
|
|
// <1=> MODE_1
|
|
// <2=> MODE_2
|
|
// <3=> MODE_3
|
|
|
|
#ifndef SPIS_DEFAULT_MODE
|
|
#define SPIS_DEFAULT_MODE 0
|
|
#endif
|
|
|
|
// <o> SPIS_DEFAULT_BIT_ORDER - SPIS default bit order
|
|
|
|
// <0=> MSB first
|
|
// <1=> LSB first
|
|
|
|
#ifndef SPIS_DEFAULT_BIT_ORDER
|
|
#define SPIS_DEFAULT_BIT_ORDER 0
|
|
#endif
|
|
|
|
// <o> SPIS_DEFAULT_DEF - SPIS default DEF character <0-255>
|
|
|
|
#ifndef SPIS_DEFAULT_DEF
|
|
#define SPIS_DEFAULT_DEF 255
|
|
#endif
|
|
|
|
// <o> SPIS_DEFAULT_ORC - SPIS default ORC character <0-255>
|
|
|
|
#ifndef SPIS_DEFAULT_ORC
|
|
#define SPIS_DEFAULT_ORC 255
|
|
#endif
|
|
|
|
// <q> SPIS0_ENABLED - Enable SPIS0 instance
|
|
|
|
#ifndef SPIS0_ENABLED
|
|
#define SPIS0_ENABLED 0
|
|
#endif
|
|
|
|
// <q> SPIS1_ENABLED - Enable SPIS1 instance
|
|
|
|
#ifndef SPIS1_ENABLED
|
|
#define SPIS1_ENABLED 0
|
|
#endif
|
|
|
|
// <q> SPIS2_ENABLED - Enable SPIS2 instance
|
|
|
|
#ifndef SPIS2_ENABLED
|
|
#define SPIS2_ENABLED 0
|
|
#endif
|
|
|
|
// <q> SPIS_NRF52_ANOMALY_109_WORKAROUND_ENABLED - Enables nRF52 Anomaly 109 workaround for SPIS.
|
|
|
|
// <i> The workaround uses a GPIOTE channel to generate interrupts
|
|
// <i> on falling edges detected on the CSN line. This will make
|
|
// <i> the CPU active for the moment when SPIS starts DMA transfers,
|
|
// <i> and this way the transfers will be protected.
|
|
// <i> This workaround uses GPIOTE driver, so this driver must be
|
|
// <i> enabled as well.
|
|
|
|
#ifndef SPIS_NRF52_ANOMALY_109_WORKAROUND_ENABLED
|
|
#define SPIS_NRF52_ANOMALY_109_WORKAROUND_ENABLED 0
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// <e> SPI_ENABLED - nrf_drv_spi - SPI/SPIM peripheral driver - legacy layer
|
|
//==========================================================
|
|
#ifndef SPI_ENABLED
|
|
#define SPI_ENABLED 0
|
|
#endif
|
|
// <o> SPI_DEFAULT_CONFIG_IRQ_PRIORITY - Interrupt priority
|
|
|
|
// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
|
|
// <0=> 0 (highest)
|
|
// <1=> 1
|
|
// <2=> 2
|
|
// <3=> 3
|
|
// <4=> 4
|
|
// <5=> 5
|
|
// <6=> 6
|
|
// <7=> 7
|
|
|
|
#ifndef SPI_DEFAULT_CONFIG_IRQ_PRIORITY
|
|
#define SPI_DEFAULT_CONFIG_IRQ_PRIORITY 6
|
|
#endif
|
|
|
|
// <o> NRF_SPI_DRV_MISO_PULLUP_CFG - MISO PIN pull-up configuration.
|
|
|
|
// <0=> NRF_GPIO_PIN_NOPULL
|
|
// <1=> NRF_GPIO_PIN_PULLDOWN
|
|
// <3=> NRF_GPIO_PIN_PULLUP
|
|
|
|
#ifndef NRF_SPI_DRV_MISO_PULLUP_CFG
|
|
#define NRF_SPI_DRV_MISO_PULLUP_CFG 1
|
|
#endif
|
|
|
|
// <e> SPI0_ENABLED - Enable SPI0 instance
|
|
//==========================================================
|
|
#ifndef SPI0_ENABLED
|
|
#define SPI0_ENABLED 0
|
|
#endif
|
|
// <q> SPI0_USE_EASY_DMA - Use EasyDMA
|
|
|
|
#ifndef SPI0_USE_EASY_DMA
|
|
#define SPI0_USE_EASY_DMA 1
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// <e> SPI1_ENABLED - Enable SPI1 instance
|
|
//==========================================================
|
|
#ifndef SPI1_ENABLED
|
|
#define SPI1_ENABLED 0
|
|
#endif
|
|
// <q> SPI1_USE_EASY_DMA - Use EasyDMA
|
|
|
|
#ifndef SPI1_USE_EASY_DMA
|
|
#define SPI1_USE_EASY_DMA 1
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// <e> SPI2_ENABLED - Enable SPI2 instance
|
|
//==========================================================
|
|
#ifndef SPI2_ENABLED
|
|
#define SPI2_ENABLED 0
|
|
#endif
|
|
// <q> SPI2_USE_EASY_DMA - Use EasyDMA
|
|
|
|
#ifndef SPI2_USE_EASY_DMA
|
|
#define SPI2_USE_EASY_DMA 1
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// <q> SPIM_NRF52_ANOMALY_109_WORKAROUND_ENABLED - Enables nRF52 anomaly 109 workaround for SPIM.
|
|
|
|
// <i> The workaround uses interrupts to wake up the CPU by catching
|
|
// <i> a start event of zero-length transmission to start the clock. This
|
|
// <i> ensures that the DMA transfer will be executed without issues and
|
|
// <i> that the proper transfer will be started. See more in the Errata
|
|
// <i> document or Anomaly 109 Addendum located at
|
|
// <i> https://infocenter.nordicsemi.com/
|
|
|
|
#ifndef SPIM_NRF52_ANOMALY_109_WORKAROUND_ENABLED
|
|
#define SPIM_NRF52_ANOMALY_109_WORKAROUND_ENABLED 0
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// <e> TIMER_ENABLED - nrf_drv_timer - TIMER periperal driver - legacy layer
|
|
//==========================================================
|
|
#ifndef TIMER_ENABLED
|
|
#define TIMER_ENABLED 0
|
|
#endif
|
|
// <o> TIMER_DEFAULT_CONFIG_FREQUENCY - Timer frequency if in Timer mode
|
|
|
|
// <0=> 16 MHz
|
|
// <1=> 8 MHz
|
|
// <2=> 4 MHz
|
|
// <3=> 2 MHz
|
|
// <4=> 1 MHz
|
|
// <5=> 500 kHz
|
|
// <6=> 250 kHz
|
|
// <7=> 125 kHz
|
|
// <8=> 62.5 kHz
|
|
// <9=> 31.25 kHz
|
|
|
|
#ifndef TIMER_DEFAULT_CONFIG_FREQUENCY
|
|
#define TIMER_DEFAULT_CONFIG_FREQUENCY 0
|
|
#endif
|
|
|
|
// <o> TIMER_DEFAULT_CONFIG_MODE - Timer mode or operation
|
|
|
|
// <0=> Timer
|
|
// <1=> Counter
|
|
|
|
#ifndef TIMER_DEFAULT_CONFIG_MODE
|
|
#define TIMER_DEFAULT_CONFIG_MODE 0
|
|
#endif
|
|
|
|
// <o> TIMER_DEFAULT_CONFIG_BIT_WIDTH - Timer counter bit width
|
|
|
|
// <0=> 16 bit
|
|
// <1=> 8 bit
|
|
// <2=> 24 bit
|
|
// <3=> 32 bit
|
|
|
|
#ifndef TIMER_DEFAULT_CONFIG_BIT_WIDTH
|
|
#define TIMER_DEFAULT_CONFIG_BIT_WIDTH 0
|
|
#endif
|
|
|
|
// <o> TIMER_DEFAULT_CONFIG_IRQ_PRIORITY - Interrupt priority
|
|
|
|
// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
|
|
// <0=> 0 (highest)
|
|
// <1=> 1
|
|
// <2=> 2
|
|
// <3=> 3
|
|
// <4=> 4
|
|
// <5=> 5
|
|
// <6=> 6
|
|
// <7=> 7
|
|
|
|
#ifndef TIMER_DEFAULT_CONFIG_IRQ_PRIORITY
|
|
#define TIMER_DEFAULT_CONFIG_IRQ_PRIORITY 6
|
|
#endif
|
|
|
|
// <q> TIMER0_ENABLED - Enable TIMER0 instance
|
|
|
|
#ifndef TIMER0_ENABLED
|
|
#define TIMER0_ENABLED 0
|
|
#endif
|
|
|
|
// <q> TIMER1_ENABLED - Enable TIMER1 instance
|
|
|
|
#ifndef TIMER1_ENABLED
|
|
#define TIMER1_ENABLED 0
|
|
#endif
|
|
|
|
// <q> TIMER2_ENABLED - Enable TIMER2 instance
|
|
|
|
#ifndef TIMER2_ENABLED
|
|
#define TIMER2_ENABLED 0
|
|
#endif
|
|
|
|
// <q> TIMER3_ENABLED - Enable TIMER3 instance
|
|
|
|
#ifndef TIMER3_ENABLED
|
|
#define TIMER3_ENABLED 0
|
|
#endif
|
|
|
|
// <q> TIMER4_ENABLED - Enable TIMER4 instance
|
|
|
|
#ifndef TIMER4_ENABLED
|
|
#define TIMER4_ENABLED 0
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// <e> TWIS_ENABLED - nrf_drv_twis - TWIS peripheral driver - legacy layer
|
|
//==========================================================
|
|
#ifndef TWIS_ENABLED
|
|
#define TWIS_ENABLED 0
|
|
#endif
|
|
// <q> TWIS0_ENABLED - Enable TWIS0 instance
|
|
|
|
#ifndef TWIS0_ENABLED
|
|
#define TWIS0_ENABLED 0
|
|
#endif
|
|
|
|
// <q> TWIS1_ENABLED - Enable TWIS1 instance
|
|
|
|
#ifndef TWIS1_ENABLED
|
|
#define TWIS1_ENABLED 0
|
|
#endif
|
|
|
|
// <q> TWIS_ASSUME_INIT_AFTER_RESET_ONLY - Assume that any instance would be initialized only once
|
|
|
|
// <i> Optimization flag. Registers used by TWIS are shared by other peripherals. Normally, during initialization driver tries to clear all
|
|
// registers to known state before doing the initialization itself. This gives initialization safe procedure, no matter when it would be
|
|
// called. If you activate TWIS only once and do never uninitialize it - set this flag to 1 what gives more optimal code.
|
|
|
|
#ifndef TWIS_ASSUME_INIT_AFTER_RESET_ONLY
|
|
#define TWIS_ASSUME_INIT_AFTER_RESET_ONLY 0
|
|
#endif
|
|
|
|
// <q> TWIS_NO_SYNC_MODE - Remove support for synchronous mode
|
|
|
|
// <i> Synchronous mode would be used in specific situations. And it uses some additional code and data memory to safely process state
|
|
// machine by polling it in status functions. If this functionality is not required it may be disabled to free some resources.
|
|
|
|
#ifndef TWIS_NO_SYNC_MODE
|
|
#define TWIS_NO_SYNC_MODE 0
|
|
#endif
|
|
|
|
// <o> TWIS_DEFAULT_CONFIG_ADDR0 - Address0
|
|
#ifndef TWIS_DEFAULT_CONFIG_ADDR0
|
|
#define TWIS_DEFAULT_CONFIG_ADDR0 0
|
|
#endif
|
|
|
|
// <o> TWIS_DEFAULT_CONFIG_ADDR1 - Address1
|
|
#ifndef TWIS_DEFAULT_CONFIG_ADDR1
|
|
#define TWIS_DEFAULT_CONFIG_ADDR1 0
|
|
#endif
|
|
|
|
// <o> TWIS_DEFAULT_CONFIG_SCL_PULL - SCL pin pull configuration
|
|
|
|
// <0=> Disabled
|
|
// <1=> Pull down
|
|
// <3=> Pull up
|
|
|
|
#ifndef TWIS_DEFAULT_CONFIG_SCL_PULL
|
|
#define TWIS_DEFAULT_CONFIG_SCL_PULL 0
|
|
#endif
|
|
|
|
// <o> TWIS_DEFAULT_CONFIG_SDA_PULL - SDA pin pull configuration
|
|
|
|
// <0=> Disabled
|
|
// <1=> Pull down
|
|
// <3=> Pull up
|
|
|
|
#ifndef TWIS_DEFAULT_CONFIG_SDA_PULL
|
|
#define TWIS_DEFAULT_CONFIG_SDA_PULL 0
|
|
#endif
|
|
|
|
// <o> TWIS_DEFAULT_CONFIG_IRQ_PRIORITY - Interrupt priority
|
|
|
|
// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
|
|
// <0=> 0 (highest)
|
|
// <1=> 1
|
|
// <2=> 2
|
|
// <3=> 3
|
|
// <4=> 4
|
|
// <5=> 5
|
|
// <6=> 6
|
|
// <7=> 7
|
|
|
|
#ifndef TWIS_DEFAULT_CONFIG_IRQ_PRIORITY
|
|
#define TWIS_DEFAULT_CONFIG_IRQ_PRIORITY 6
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// <e> UART_ENABLED - nrf_drv_uart - UART/UARTE peripheral driver - legacy layer
|
|
//==========================================================
|
|
#ifndef UART_ENABLED
|
|
#define UART_ENABLED 0
|
|
#endif
|
|
// <o> UART_DEFAULT_CONFIG_HWFC - Hardware Flow Control
|
|
|
|
// <0=> Disabled
|
|
// <1=> Enabled
|
|
|
|
#ifndef UART_DEFAULT_CONFIG_HWFC
|
|
#define UART_DEFAULT_CONFIG_HWFC 0
|
|
#endif
|
|
|
|
// <o> UART_DEFAULT_CONFIG_PARITY - Parity
|
|
|
|
// <0=> Excluded
|
|
// <14=> Included
|
|
|
|
#ifndef UART_DEFAULT_CONFIG_PARITY
|
|
#define UART_DEFAULT_CONFIG_PARITY 0
|
|
#endif
|
|
|
|
// <o> UART_DEFAULT_CONFIG_BAUDRATE - Default Baudrate
|
|
|
|
// <323584=> 1200 baud
|
|
// <643072=> 2400 baud
|
|
// <1290240=> 4800 baud
|
|
// <2576384=> 9600 baud
|
|
// <3862528=> 14400 baud
|
|
// <5152768=> 19200 baud
|
|
// <7716864=> 28800 baud
|
|
// <10289152=> 38400 baud
|
|
// <15400960=> 57600 baud
|
|
// <20615168=> 76800 baud
|
|
// <30801920=> 115200 baud
|
|
// <61865984=> 230400 baud
|
|
// <67108864=> 250000 baud
|
|
// <121634816=> 460800 baud
|
|
// <251658240=> 921600 baud
|
|
// <268435456=> 1000000 baud
|
|
|
|
#ifndef UART_DEFAULT_CONFIG_BAUDRATE
|
|
#define UART_DEFAULT_CONFIG_BAUDRATE 30801920
|
|
#endif
|
|
|
|
// <o> UART_DEFAULT_CONFIG_IRQ_PRIORITY - Interrupt priority
|
|
|
|
// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
|
|
// <0=> 0 (highest)
|
|
// <1=> 1
|
|
// <2=> 2
|
|
// <3=> 3
|
|
// <4=> 4
|
|
// <5=> 5
|
|
// <6=> 6
|
|
// <7=> 7
|
|
|
|
#ifndef UART_DEFAULT_CONFIG_IRQ_PRIORITY
|
|
#define UART_DEFAULT_CONFIG_IRQ_PRIORITY 6
|
|
#endif
|
|
|
|
// <q> UART_EASY_DMA_SUPPORT - Driver supporting EasyDMA
|
|
|
|
#ifndef UART_EASY_DMA_SUPPORT
|
|
#define UART_EASY_DMA_SUPPORT 1
|
|
#endif
|
|
|
|
// <q> UART_LEGACY_SUPPORT - Driver supporting Legacy mode
|
|
|
|
#ifndef UART_LEGACY_SUPPORT
|
|
#define UART_LEGACY_SUPPORT 1
|
|
#endif
|
|
|
|
// <e> UART0_ENABLED - Enable UART0 instance
|
|
//==========================================================
|
|
#ifndef UART0_ENABLED
|
|
#define UART0_ENABLED 0
|
|
#endif
|
|
// <q> UART0_CONFIG_USE_EASY_DMA - Default setting for using EasyDMA
|
|
|
|
#ifndef UART0_CONFIG_USE_EASY_DMA
|
|
#define UART0_CONFIG_USE_EASY_DMA 1
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// </e>
|
|
|
|
// <e> USBD_ENABLED - nrf_drv_usbd - Software Component
|
|
//==========================================================
|
|
#ifndef USBD_ENABLED
|
|
#define USBD_ENABLED 0
|
|
#endif
|
|
// <o> USBD_CONFIG_IRQ_PRIORITY - Interrupt priority
|
|
|
|
// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
|
|
// <0=> 0 (highest)
|
|
// <1=> 1
|
|
// <2=> 2
|
|
// <3=> 3
|
|
// <4=> 4
|
|
// <5=> 5
|
|
// <6=> 6
|
|
// <7=> 7
|
|
|
|
#ifndef USBD_CONFIG_IRQ_PRIORITY
|
|
#define USBD_CONFIG_IRQ_PRIORITY 6
|
|
#endif
|
|
|
|
// <o> USBD_CONFIG_DMASCHEDULER_MODE - USBD SMA scheduler working scheme
|
|
|
|
// <0=> Prioritized access
|
|
// <1=> Round Robin
|
|
|
|
#ifndef USBD_CONFIG_DMASCHEDULER_MODE
|
|
#define USBD_CONFIG_DMASCHEDULER_MODE 0
|
|
#endif
|
|
|
|
// <q> USBD_CONFIG_DMASCHEDULER_ISO_BOOST - Give priority to isochronous transfers
|
|
|
|
// <i> This option gives priority to isochronous transfers.
|
|
// <i> Enabling it assures that isochronous transfers are always processed,
|
|
// <i> even if multiple other transfers are pending.
|
|
// <i> Isochronous endpoints are prioritized before the usbd_dma_scheduler_algorithm
|
|
// <i> function is called, so the option is independent of the algorithm chosen.
|
|
|
|
#ifndef USBD_CONFIG_DMASCHEDULER_ISO_BOOST
|
|
#define USBD_CONFIG_DMASCHEDULER_ISO_BOOST 1
|
|
#endif
|
|
|
|
// <q> USBD_CONFIG_ISO_IN_ZLP - Respond to an IN token on ISO IN endpoint with ZLP when no data is ready
|
|
|
|
// <i> If set, ISO IN endpoint will respond to an IN token with ZLP when no data is ready to be sent.
|
|
// <i> Else, there will be no response.
|
|
|
|
#ifndef USBD_CONFIG_ISO_IN_ZLP
|
|
#define USBD_CONFIG_ISO_IN_ZLP 0
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// <e> WDT_ENABLED - nrf_drv_wdt - WDT peripheral driver - legacy layer
|
|
//==========================================================
|
|
#ifndef WDT_ENABLED
|
|
#define WDT_ENABLED 0
|
|
#endif
|
|
// <o> WDT_CONFIG_BEHAVIOUR - WDT behavior in CPU SLEEP or HALT mode
|
|
|
|
// <1=> Run in SLEEP, Pause in HALT
|
|
// <8=> Pause in SLEEP, Run in HALT
|
|
// <9=> Run in SLEEP and HALT
|
|
// <0=> Pause in SLEEP and HALT
|
|
|
|
#ifndef WDT_CONFIG_BEHAVIOUR
|
|
#define WDT_CONFIG_BEHAVIOUR 1
|
|
#endif
|
|
|
|
// <o> WDT_CONFIG_RELOAD_VALUE - Reload value <15-4294967295>
|
|
|
|
#ifndef WDT_CONFIG_RELOAD_VALUE
|
|
#define WDT_CONFIG_RELOAD_VALUE 2000
|
|
#endif
|
|
|
|
// <o> WDT_CONFIG_IRQ_PRIORITY - Interrupt priority
|
|
|
|
// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
|
|
// <0=> 0 (highest)
|
|
// <1=> 1
|
|
// <2=> 2
|
|
// <3=> 3
|
|
// <4=> 4
|
|
// <5=> 5
|
|
// <6=> 6
|
|
// <7=> 7
|
|
|
|
#ifndef WDT_CONFIG_IRQ_PRIORITY
|
|
#define WDT_CONFIG_IRQ_PRIORITY 6
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// <h> nrfx_qspi - QSPI peripheral driver
|
|
|
|
//==========================================================
|
|
// </h>
|
|
//==========================================================
|
|
|
|
// <h> nrfx_usbd - USBD peripheral driver
|
|
|
|
//==========================================================
|
|
// </h>
|
|
//==========================================================
|
|
|
|
// </h>
|
|
//==========================================================
|
|
|
|
// <h> nRF_Drivers_External
|
|
|
|
//==========================================================
|
|
// <q> NRF_TWI_SENSOR_ENABLED - nrf_twi_sensor - nRF TWI Sensor module
|
|
|
|
#ifndef NRF_TWI_SENSOR_ENABLED
|
|
#define NRF_TWI_SENSOR_ENABLED 0
|
|
#endif
|
|
|
|
// </h>
|
|
//==========================================================
|
|
|
|
// <h> nRF_Libraries
|
|
|
|
//==========================================================
|
|
// <q> APP_GPIOTE_ENABLED - app_gpiote - GPIOTE events dispatcher
|
|
|
|
#ifndef APP_GPIOTE_ENABLED
|
|
#define APP_GPIOTE_ENABLED 1
|
|
#endif
|
|
|
|
// <q> APP_PWM_ENABLED - app_pwm - PWM functionality
|
|
|
|
#ifndef APP_PWM_ENABLED
|
|
#define APP_PWM_ENABLED 0
|
|
#endif
|
|
|
|
// <e> APP_SCHEDULER_ENABLED - app_scheduler - Events scheduler
|
|
//==========================================================
|
|
#ifndef APP_SCHEDULER_ENABLED
|
|
#define APP_SCHEDULER_ENABLED 0
|
|
#endif
|
|
// <q> APP_SCHEDULER_WITH_PAUSE - Enabling pause feature
|
|
|
|
#ifndef APP_SCHEDULER_WITH_PAUSE
|
|
#define APP_SCHEDULER_WITH_PAUSE 0
|
|
#endif
|
|
|
|
// <q> APP_SCHEDULER_WITH_PROFILER - Enabling scheduler profiling
|
|
|
|
#ifndef APP_SCHEDULER_WITH_PROFILER
|
|
#define APP_SCHEDULER_WITH_PROFILER 0
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// <e> APP_SDCARD_ENABLED - app_sdcard - SD/MMC card support using SPI
|
|
//==========================================================
|
|
#ifndef APP_SDCARD_ENABLED
|
|
#define APP_SDCARD_ENABLED 0
|
|
#endif
|
|
// <o> APP_SDCARD_SPI_INSTANCE - SPI instance used
|
|
|
|
// <0=> 0
|
|
// <1=> 1
|
|
// <2=> 2
|
|
|
|
#ifndef APP_SDCARD_SPI_INSTANCE
|
|
#define APP_SDCARD_SPI_INSTANCE 0
|
|
#endif
|
|
|
|
// <o> APP_SDCARD_FREQ_INIT - SPI frequency
|
|
|
|
// <33554432=> 125 kHz
|
|
// <67108864=> 250 kHz
|
|
// <134217728=> 500 kHz
|
|
// <268435456=> 1 MHz
|
|
// <536870912=> 2 MHz
|
|
// <1073741824=> 4 MHz
|
|
// <2147483648=> 8 MHz
|
|
|
|
#ifndef APP_SDCARD_FREQ_INIT
|
|
#define APP_SDCARD_FREQ_INIT 67108864
|
|
#endif
|
|
|
|
// <o> APP_SDCARD_FREQ_DATA - SPI frequency
|
|
|
|
// <33554432=> 125 kHz
|
|
// <67108864=> 250 kHz
|
|
// <134217728=> 500 kHz
|
|
// <268435456=> 1 MHz
|
|
// <536870912=> 2 MHz
|
|
// <1073741824=> 4 MHz
|
|
// <2147483648=> 8 MHz
|
|
|
|
#ifndef APP_SDCARD_FREQ_DATA
|
|
#define APP_SDCARD_FREQ_DATA 1073741824
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// <e> APP_TIMER_ENABLED - app_timer - Application timer functionality
|
|
//==========================================================
|
|
#ifndef APP_TIMER_ENABLED
|
|
#define APP_TIMER_ENABLED 0
|
|
#endif
|
|
// <o> APP_TIMER_CONFIG_RTC_FREQUENCY - Configure RTC prescaler.
|
|
|
|
// <0=> 32768 Hz
|
|
// <1=> 16384 Hz
|
|
// <3=> 8192 Hz
|
|
// <7=> 4096 Hz
|
|
// <15=> 2048 Hz
|
|
// <31=> 1024 Hz
|
|
|
|
#ifndef APP_TIMER_CONFIG_RTC_FREQUENCY
|
|
#define APP_TIMER_CONFIG_RTC_FREQUENCY 0
|
|
#endif
|
|
|
|
// <o> APP_TIMER_CONFIG_IRQ_PRIORITY - Interrupt priority
|
|
|
|
// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
|
|
// <0=> 0 (highest)
|
|
// <1=> 1
|
|
// <2=> 2
|
|
// <3=> 3
|
|
// <4=> 4
|
|
// <5=> 5
|
|
// <6=> 6
|
|
// <7=> 7
|
|
|
|
#ifndef APP_TIMER_CONFIG_IRQ_PRIORITY
|
|
#define APP_TIMER_CONFIG_IRQ_PRIORITY 6
|
|
#endif
|
|
|
|
// <o> APP_TIMER_CONFIG_OP_QUEUE_SIZE - Capacity of timer requests queue.
|
|
// <i> Size of the queue depends on how many timers are used
|
|
// <i> in the system, how often timers are started and overall
|
|
// <i> system latency. If queue size is too small app_timer calls
|
|
// <i> will fail.
|
|
|
|
#ifndef APP_TIMER_CONFIG_OP_QUEUE_SIZE
|
|
#define APP_TIMER_CONFIG_OP_QUEUE_SIZE 10
|
|
#endif
|
|
|
|
// <q> APP_TIMER_CONFIG_USE_SCHEDULER - Enable scheduling app_timer events to app_scheduler
|
|
|
|
#ifndef APP_TIMER_CONFIG_USE_SCHEDULER
|
|
#define APP_TIMER_CONFIG_USE_SCHEDULER 0
|
|
#endif
|
|
|
|
// <q> APP_TIMER_KEEPS_RTC_ACTIVE - Enable RTC always on
|
|
|
|
// <i> If option is enabled RTC is kept running even if there is no active timers.
|
|
// <i> This option can be used when app_timer is used for timestamping.
|
|
|
|
#ifndef APP_TIMER_KEEPS_RTC_ACTIVE
|
|
#define APP_TIMER_KEEPS_RTC_ACTIVE 0
|
|
#endif
|
|
|
|
// <o> APP_TIMER_SAFE_WINDOW_MS - Maximum possible latency (in milliseconds) of handling app_timer event.
|
|
// <i> Maximum possible timeout that can be set is reduced by safe window.
|
|
// <i> Example: RTC frequency 16384 Hz, maximum possible timeout 1024 seconds - APP_TIMER_SAFE_WINDOW_MS.
|
|
// <i> Since RTC is not stopped when processor is halted in debugging session, this value
|
|
// <i> must cover it if debugging is needed. It is possible to halt processor for APP_TIMER_SAFE_WINDOW_MS
|
|
// <i> without corrupting app_timer behavior.
|
|
|
|
#ifndef APP_TIMER_SAFE_WINDOW_MS
|
|
#define APP_TIMER_SAFE_WINDOW_MS 300000
|
|
#endif
|
|
|
|
// <h> App Timer Legacy configuration - Legacy configuration.
|
|
|
|
//==========================================================
|
|
// <q> APP_TIMER_WITH_PROFILER - Enable app_timer profiling
|
|
|
|
#ifndef APP_TIMER_WITH_PROFILER
|
|
#define APP_TIMER_WITH_PROFILER 0
|
|
#endif
|
|
|
|
// <q> APP_TIMER_CONFIG_SWI_NUMBER - Configure SWI instance used.
|
|
|
|
#ifndef APP_TIMER_CONFIG_SWI_NUMBER
|
|
#define APP_TIMER_CONFIG_SWI_NUMBER 0
|
|
#endif
|
|
|
|
// </h>
|
|
//==========================================================
|
|
|
|
// </e>
|
|
|
|
// <q> APP_USBD_AUDIO_ENABLED - app_usbd_audio - USB AUDIO class
|
|
|
|
#ifndef APP_USBD_AUDIO_ENABLED
|
|
#define APP_USBD_AUDIO_ENABLED 0
|
|
#endif
|
|
|
|
// <e> APP_USBD_ENABLED - app_usbd - USB Device library
|
|
//==========================================================
|
|
#ifndef APP_USBD_ENABLED
|
|
#define APP_USBD_ENABLED 0
|
|
#endif
|
|
// <o> APP_USBD_VID - Vendor ID. <0x0000-0xFFFF>
|
|
|
|
// <i> Note: This value is not editable in Configuration Wizard.
|
|
// <i> Vendor ID ordered from USB IF: http://www.usb.org/developers/vendor/
|
|
|
|
#ifndef APP_USBD_VID
|
|
#define APP_USBD_VID 0
|
|
#endif
|
|
|
|
// <o> APP_USBD_PID - Product ID. <0x0000-0xFFFF>
|
|
|
|
// <i> Note: This value is not editable in Configuration Wizard.
|
|
// <i> Selected Product ID
|
|
|
|
#ifndef APP_USBD_PID
|
|
#define APP_USBD_PID 0
|
|
#endif
|
|
|
|
// <o> APP_USBD_DEVICE_VER_MAJOR - Device version, major part. <0-99>
|
|
|
|
// <i> Device version, will be converted automatically to BCD notation. Use just decimal values.
|
|
|
|
#ifndef APP_USBD_DEVICE_VER_MAJOR
|
|
#define APP_USBD_DEVICE_VER_MAJOR 1
|
|
#endif
|
|
|
|
// <o> APP_USBD_DEVICE_VER_MINOR - Device version, minor part. <0-99>
|
|
|
|
// <i> Device version, will be converted automatically to BCD notation. Use just decimal values.
|
|
|
|
#ifndef APP_USBD_DEVICE_VER_MINOR
|
|
#define APP_USBD_DEVICE_VER_MINOR 0
|
|
#endif
|
|
|
|
// <q> APP_USBD_CONFIG_SELF_POWERED - Self-powered device, as opposed to bus-powered.
|
|
|
|
#ifndef APP_USBD_CONFIG_SELF_POWERED
|
|
#define APP_USBD_CONFIG_SELF_POWERED 1
|
|
#endif
|
|
|
|
// <o> APP_USBD_CONFIG_MAX_POWER - MaxPower field in configuration descriptor in milliamps. <0-500>
|
|
|
|
#ifndef APP_USBD_CONFIG_MAX_POWER
|
|
#define APP_USBD_CONFIG_MAX_POWER 100
|
|
#endif
|
|
|
|
// <q> APP_USBD_CONFIG_POWER_EVENTS_PROCESS - Process power events.
|
|
|
|
// <i> Enable processing power events in USB event handler.
|
|
|
|
#ifndef APP_USBD_CONFIG_POWER_EVENTS_PROCESS
|
|
#define APP_USBD_CONFIG_POWER_EVENTS_PROCESS 1
|
|
#endif
|
|
|
|
// <e> APP_USBD_CONFIG_EVENT_QUEUE_ENABLE - Enable event queue.
|
|
|
|
// <i> This is the default configuration when all the events are placed into internal queue.
|
|
// <i> Disable it when an external queue is used like app_scheduler or if you wish to process all events inside interrupts.
|
|
// <i> Processing all events from the interrupt level adds requirement not to call any functions that modifies the USBD library state from
|
|
// the context higher than USB interrupt context. <i> Functions that modify USBD state are functions for sleep, wakeup, start, stop, enable,
|
|
// and disable.
|
|
//==========================================================
|
|
#ifndef APP_USBD_CONFIG_EVENT_QUEUE_ENABLE
|
|
#define APP_USBD_CONFIG_EVENT_QUEUE_ENABLE 1
|
|
#endif
|
|
// <o> APP_USBD_CONFIG_EVENT_QUEUE_SIZE - The size of the event queue. <16-64>
|
|
|
|
// <i> The size of the queue for the events that would be processed in the main loop.
|
|
|
|
#ifndef APP_USBD_CONFIG_EVENT_QUEUE_SIZE
|
|
#define APP_USBD_CONFIG_EVENT_QUEUE_SIZE 32
|
|
#endif
|
|
|
|
// <o> APP_USBD_CONFIG_SOF_HANDLING_MODE - Change SOF events handling mode.
|
|
|
|
// <i> Normal queue - SOF events are pushed normally into the event queue.
|
|
// <i> Compress queue - SOF events are counted and binded with other events or executed when the queue is empty.
|
|
// <i> This prevents the queue from filling up with SOF events.
|
|
// <i> Interrupt - SOF events are processed in interrupt.
|
|
// <0=> Normal queue
|
|
// <1=> Compress queue
|
|
// <2=> Interrupt
|
|
|
|
#ifndef APP_USBD_CONFIG_SOF_HANDLING_MODE
|
|
#define APP_USBD_CONFIG_SOF_HANDLING_MODE 1
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// <q> APP_USBD_CONFIG_SOF_TIMESTAMP_PROVIDE - Provide a function that generates timestamps for logs based on the current SOF.
|
|
|
|
// <i> The function app_usbd_sof_timestamp_get is implemented if the logger is enabled.
|
|
// <i> Use it when initializing the logger.
|
|
// <i> SOF processing is always enabled when this configuration parameter is active.
|
|
// <i> Note: This option is configured outside of APP_USBD_CONFIG_LOG_ENABLED.
|
|
// <i> This means that it works even if the logging in this very module is disabled.
|
|
|
|
#ifndef APP_USBD_CONFIG_SOF_TIMESTAMP_PROVIDE
|
|
#define APP_USBD_CONFIG_SOF_TIMESTAMP_PROVIDE 0
|
|
#endif
|
|
|
|
// <o> APP_USBD_CONFIG_DESC_STRING_SIZE - Maximum size of the NULL-terminated string of the string descriptor. <31-254>
|
|
|
|
// <i> 31 characters can be stored in the internal USB buffer used for transfers.
|
|
// <i> Any value higher than 31 creates an additional buffer just for descriptor strings.
|
|
|
|
#ifndef APP_USBD_CONFIG_DESC_STRING_SIZE
|
|
#define APP_USBD_CONFIG_DESC_STRING_SIZE 31
|
|
#endif
|
|
|
|
// <q> APP_USBD_CONFIG_DESC_STRING_UTF_ENABLED - Enable UTF8 conversion.
|
|
|
|
// <i> Enable UTF8-encoded characters. In normal processing, only ASCII characters are available.
|
|
|
|
#ifndef APP_USBD_CONFIG_DESC_STRING_UTF_ENABLED
|
|
#define APP_USBD_CONFIG_DESC_STRING_UTF_ENABLED 0
|
|
#endif
|
|
|
|
// <s> APP_USBD_STRINGS_LANGIDS - Supported languages identifiers.
|
|
|
|
// <i> Note: This value is not editable in Configuration Wizard.
|
|
// <i> Comma-separated list of supported languages.
|
|
#ifndef APP_USBD_STRINGS_LANGIDS
|
|
#define APP_USBD_STRINGS_LANGIDS APP_USBD_LANG_AND_SUBLANG(APP_USBD_LANG_ENGLISH, APP_USBD_SUBLANG_ENGLISH_US)
|
|
#endif
|
|
|
|
// <e> APP_USBD_STRING_ID_MANUFACTURER - Define manufacturer string ID.
|
|
|
|
// <i> Setting ID to 0 disables the string.
|
|
//==========================================================
|
|
#ifndef APP_USBD_STRING_ID_MANUFACTURER
|
|
#define APP_USBD_STRING_ID_MANUFACTURER 1
|
|
#endif
|
|
// <q> APP_USBD_STRINGS_MANUFACTURER_EXTERN - Define whether @ref APP_USBD_STRINGS_MANUFACTURER is created by macro or declared as a global
|
|
// variable.
|
|
|
|
#ifndef APP_USBD_STRINGS_MANUFACTURER_EXTERN
|
|
#define APP_USBD_STRINGS_MANUFACTURER_EXTERN 0
|
|
#endif
|
|
|
|
// <s> APP_USBD_STRINGS_MANUFACTURER - String descriptor for the manufacturer name.
|
|
|
|
// <i> Note: This value is not editable in Configuration Wizard.
|
|
// <i> Comma-separated list of manufacturer names for each defined language.
|
|
// <i> Use @ref APP_USBD_STRING_DESC macro to create string descriptor from a NULL-terminated string.
|
|
// <i> Use @ref APP_USBD_STRING_RAW8_DESC macro to create string descriptor from comma-separated uint8_t values.
|
|
// <i> Use @ref APP_USBD_STRING_RAW16_DESC macro to create string descriptor from comma-separated uint16_t values.
|
|
// <i> Alternatively, configure the macro to point to any internal variable pointer that already contains the descriptor.
|
|
// <i> Setting string to NULL disables that string.
|
|
// <i> The order of manufacturer names must be the same like in @ref APP_USBD_STRINGS_LANGIDS.
|
|
#ifndef APP_USBD_STRINGS_MANUFACTURER
|
|
#define APP_USBD_STRINGS_MANUFACTURER APP_USBD_STRING_DESC("Nordic Semiconductor")
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// <e> APP_USBD_STRING_ID_PRODUCT - Define product string ID.
|
|
|
|
// <i> Setting ID to 0 disables the string.
|
|
//==========================================================
|
|
#ifndef APP_USBD_STRING_ID_PRODUCT
|
|
#define APP_USBD_STRING_ID_PRODUCT 2
|
|
#endif
|
|
// <q> APP_USBD_STRINGS_PRODUCT_EXTERN - Define whether @ref APP_USBD_STRINGS_PRODUCT is created by macro or declared as a global variable.
|
|
|
|
#ifndef APP_USBD_STRINGS_PRODUCT_EXTERN
|
|
#define APP_USBD_STRINGS_PRODUCT_EXTERN 0
|
|
#endif
|
|
|
|
// <s> APP_USBD_STRINGS_PRODUCT - String descriptor for the product name.
|
|
|
|
// <i> Note: This value is not editable in Configuration Wizard.
|
|
// <i> List of product names that is defined the same way like in @ref APP_USBD_STRINGS_MANUFACTURER.
|
|
#ifndef APP_USBD_STRINGS_PRODUCT
|
|
#define APP_USBD_STRINGS_PRODUCT APP_USBD_STRING_DESC("nRF52 USB Product")
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// <e> APP_USBD_STRING_ID_SERIAL - Define serial number string ID.
|
|
|
|
// <i> Setting ID to 0 disables the string.
|
|
//==========================================================
|
|
#ifndef APP_USBD_STRING_ID_SERIAL
|
|
#define APP_USBD_STRING_ID_SERIAL 3
|
|
#endif
|
|
// <q> APP_USBD_STRING_SERIAL_EXTERN - Define whether @ref APP_USBD_STRING_SERIAL is created by macro or declared as a global variable.
|
|
|
|
#ifndef APP_USBD_STRING_SERIAL_EXTERN
|
|
#define APP_USBD_STRING_SERIAL_EXTERN 0
|
|
#endif
|
|
|
|
// <s> APP_USBD_STRING_SERIAL - String descriptor for the serial number.
|
|
|
|
// <i> Note: This value is not editable in Configuration Wizard.
|
|
// <i> Serial number that is defined the same way like in @ref APP_USBD_STRINGS_MANUFACTURER.
|
|
#ifndef APP_USBD_STRING_SERIAL
|
|
#define APP_USBD_STRING_SERIAL APP_USBD_STRING_DESC("000000000000")
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// <e> APP_USBD_STRING_ID_CONFIGURATION - Define configuration string ID.
|
|
|
|
// <i> Setting ID to 0 disables the string.
|
|
//==========================================================
|
|
#ifndef APP_USBD_STRING_ID_CONFIGURATION
|
|
#define APP_USBD_STRING_ID_CONFIGURATION 4
|
|
#endif
|
|
// <q> APP_USBD_STRING_CONFIGURATION_EXTERN - Define whether @ref APP_USBD_STRINGS_CONFIGURATION is created by macro or declared as global
|
|
// variable.
|
|
|
|
#ifndef APP_USBD_STRING_CONFIGURATION_EXTERN
|
|
#define APP_USBD_STRING_CONFIGURATION_EXTERN 0
|
|
#endif
|
|
|
|
// <s> APP_USBD_STRINGS_CONFIGURATION - String descriptor for the device configuration.
|
|
|
|
// <i> Note: This value is not editable in Configuration Wizard.
|
|
// <i> Configuration string that is defined the same way like in @ref APP_USBD_STRINGS_MANUFACTURER.
|
|
#ifndef APP_USBD_STRINGS_CONFIGURATION
|
|
#define APP_USBD_STRINGS_CONFIGURATION APP_USBD_STRING_DESC("Default configuration")
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// <s> APP_USBD_STRINGS_USER - Default values for user strings.
|
|
|
|
// <i> Note: This value is not editable in Configuration Wizard.
|
|
// <i> This value stores all application specific user strings with the default initialization.
|
|
// <i> The setup is done by X-macros.
|
|
// <i> Expected macro parameters:
|
|
// <i> @code
|
|
// <i> X(mnemonic, [=str_idx], ...)
|
|
// <i> @endcode
|
|
// <i> - @c mnemonic: Mnemonic of the string descriptor that would be added to
|
|
// <i> @ref app_usbd_string_desc_idx_t enumerator.
|
|
// <i> - @c str_idx : String index value, can be set or left empty.
|
|
// <i> For example, WinUSB driver requires descriptor to be present on 0xEE index.
|
|
// <i> Then use X(USBD_STRING_WINUSB, =0xEE, (APP_USBD_STRING_DESC(...)))
|
|
// <i> - @c ... : List of string descriptors for each defined language.
|
|
#ifndef APP_USBD_STRINGS_USER
|
|
#define APP_USBD_STRINGS_USER X(APP_USER_1, , APP_USBD_STRING_DESC("User 1"))
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// <e> APP_USBD_HID_ENABLED - app_usbd_hid - USB HID class
|
|
//==========================================================
|
|
#ifndef APP_USBD_HID_ENABLED
|
|
#define APP_USBD_HID_ENABLED 0
|
|
#endif
|
|
// <o> APP_USBD_HID_DEFAULT_IDLE_RATE - Default idle rate for HID class. <0-255>
|
|
|
|
// <i> 0 means indefinite duration, any other value is multiplied by 4 milliseconds. Refer to Chapter 7.2.4 of HID 1.11 Specification.
|
|
|
|
#ifndef APP_USBD_HID_DEFAULT_IDLE_RATE
|
|
#define APP_USBD_HID_DEFAULT_IDLE_RATE 0
|
|
#endif
|
|
|
|
// <o> APP_USBD_HID_REPORT_IDLE_TABLE_SIZE - Size of idle rate table. <1-255>
|
|
|
|
// <i> Must be higher than the highest report ID used.
|
|
|
|
#ifndef APP_USBD_HID_REPORT_IDLE_TABLE_SIZE
|
|
#define APP_USBD_HID_REPORT_IDLE_TABLE_SIZE 4
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// <q> APP_USBD_HID_GENERIC_ENABLED - app_usbd_hid_generic - USB HID generic
|
|
|
|
#ifndef APP_USBD_HID_GENERIC_ENABLED
|
|
#define APP_USBD_HID_GENERIC_ENABLED 0
|
|
#endif
|
|
|
|
// <q> APP_USBD_HID_KBD_ENABLED - app_usbd_hid_kbd - USB HID keyboard
|
|
|
|
#ifndef APP_USBD_HID_KBD_ENABLED
|
|
#define APP_USBD_HID_KBD_ENABLED 0
|
|
#endif
|
|
|
|
// <q> APP_USBD_HID_MOUSE_ENABLED - app_usbd_hid_mouse - USB HID mouse
|
|
|
|
#ifndef APP_USBD_HID_MOUSE_ENABLED
|
|
#define APP_USBD_HID_MOUSE_ENABLED 0
|
|
#endif
|
|
|
|
// <q> APP_USBD_MSC_ENABLED - app_usbd_msc - USB MSC class
|
|
|
|
#ifndef APP_USBD_MSC_ENABLED
|
|
#define APP_USBD_MSC_ENABLED 0
|
|
#endif
|
|
|
|
// <q> CRC16_ENABLED - crc16 - CRC16 calculation routines
|
|
|
|
#ifndef CRC16_ENABLED
|
|
#define CRC16_ENABLED 1
|
|
#endif
|
|
|
|
// <q> CRC32_ENABLED - crc32 - CRC32 calculation routines
|
|
|
|
#ifndef CRC32_ENABLED
|
|
#define CRC32_ENABLED 0
|
|
#endif
|
|
|
|
// <q> ECC_ENABLED - ecc - Elliptic Curve Cryptography Library
|
|
|
|
#ifndef ECC_ENABLED
|
|
#define ECC_ENABLED 0
|
|
#endif
|
|
|
|
// <e> FDS_ENABLED - fds - Flash data storage module
|
|
//==========================================================
|
|
#ifndef FDS_ENABLED
|
|
#define FDS_ENABLED 1
|
|
#endif
|
|
// <h> Pages - Virtual page settings
|
|
|
|
// <i> Configure the number of virtual pages to use and their size.
|
|
//==========================================================
|
|
// <o> FDS_VIRTUAL_PAGES - Number of virtual flash pages to use.
|
|
// <i> One of the virtual pages is reserved by the system for garbage collection.
|
|
// <i> Therefore, the minimum is two virtual pages: one page to store data and one page to be used by the system for garbage collection.
|
|
// <i> The total amount of flash memory that is used by FDS amounts to @ref FDS_VIRTUAL_PAGES * @ref FDS_VIRTUAL_PAGE_SIZE * 4 bytes.
|
|
|
|
#ifndef FDS_VIRTUAL_PAGES
|
|
#define FDS_VIRTUAL_PAGES 3
|
|
#endif
|
|
|
|
// <o> FDS_VIRTUAL_PAGE_SIZE - The size of a virtual flash page.
|
|
|
|
// <i> Expressed in number of 4-byte words.
|
|
// <i> By default, a virtual page is the same size as a physical page.
|
|
// <i> The size of a virtual page must be a multiple of the size of a physical page.
|
|
// <1024=> 1024
|
|
// <2048=> 2048
|
|
|
|
#ifndef FDS_VIRTUAL_PAGE_SIZE
|
|
#define FDS_VIRTUAL_PAGE_SIZE 1024
|
|
#endif
|
|
|
|
// <o> FDS_VIRTUAL_PAGES_RESERVED - The number of virtual flash pages that are used by other modules.
|
|
// <i> FDS module stores its data in the last pages of the flash memory.
|
|
// <i> By setting this value, you can move flash end address used by the FDS.
|
|
// <i> As a result the reserved space can be used by other modules.
|
|
|
|
#ifndef FDS_VIRTUAL_PAGES_RESERVED
|
|
#define FDS_VIRTUAL_PAGES_RESERVED 0
|
|
#endif
|
|
|
|
// </h>
|
|
//==========================================================
|
|
|
|
// <h> Backend - Backend configuration
|
|
|
|
// <i> Configure which nrf_fstorage backend is used by FDS to write to flash.
|
|
//==========================================================
|
|
// <o> FDS_BACKEND - FDS flash backend.
|
|
|
|
// <i> NRF_FSTORAGE_SD uses the nrf_fstorage_sd backend implementation using the SoftDevice API. Use this if you have a SoftDevice present.
|
|
// <i> NRF_FSTORAGE_NVMC uses the nrf_fstorage_nvmc implementation. Use this setting if you don't use the SoftDevice.
|
|
// <1=> NRF_FSTORAGE_NVMC
|
|
// <2=> NRF_FSTORAGE_SD
|
|
|
|
#ifndef FDS_BACKEND
|
|
#define FDS_BACKEND 2
|
|
#endif
|
|
|
|
// </h>
|
|
//==========================================================
|
|
|
|
// <h> Queue - Queue settings
|
|
|
|
//==========================================================
|
|
// <o> FDS_OP_QUEUE_SIZE - Size of the internal queue.
|
|
// <i> Increase this value if you frequently get synchronous FDS_ERR_NO_SPACE_IN_QUEUES errors.
|
|
|
|
#ifndef FDS_OP_QUEUE_SIZE
|
|
#define FDS_OP_QUEUE_SIZE 4
|
|
#endif
|
|
|
|
// </h>
|
|
//==========================================================
|
|
|
|
// <h> CRC - CRC functionality
|
|
|
|
//==========================================================
|
|
// <e> FDS_CRC_CHECK_ON_READ - Enable CRC checks.
|
|
|
|
// <i> Save a record's CRC when it is written to flash and check it when the record is opened.
|
|
// <i> Records with an incorrect CRC can still be 'seen' by the user using FDS functions, but they cannot be opened.
|
|
// <i> Additionally, they will not be garbage collected until they are deleted.
|
|
//==========================================================
|
|
#ifndef FDS_CRC_CHECK_ON_READ
|
|
#define FDS_CRC_CHECK_ON_READ 0
|
|
#endif
|
|
// <o> FDS_CRC_CHECK_ON_WRITE - Perform a CRC check on newly written records.
|
|
|
|
// <i> Perform a CRC check on newly written records.
|
|
// <i> This setting can be used to make sure that the record data was not altered while being written to flash.
|
|
// <1=> Enabled
|
|
// <0=> Disabled
|
|
|
|
#ifndef FDS_CRC_CHECK_ON_WRITE
|
|
#define FDS_CRC_CHECK_ON_WRITE 0
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// </h>
|
|
//==========================================================
|
|
|
|
// <h> Users - Number of users
|
|
|
|
//==========================================================
|
|
// <o> FDS_MAX_USERS - Maximum number of callbacks that can be registered.
|
|
#ifndef FDS_MAX_USERS
|
|
#define FDS_MAX_USERS 4
|
|
#endif
|
|
|
|
// </h>
|
|
//==========================================================
|
|
|
|
// </e>
|
|
|
|
// <q> HARDFAULT_HANDLER_ENABLED - hardfault_default - HardFault default handler for debugging and release
|
|
|
|
#ifndef HARDFAULT_HANDLER_ENABLED
|
|
#define HARDFAULT_HANDLER_ENABLED 1
|
|
#endif
|
|
|
|
// <e> HCI_MEM_POOL_ENABLED - hci_mem_pool - memory pool implementation used by HCI
|
|
//==========================================================
|
|
#ifndef HCI_MEM_POOL_ENABLED
|
|
#define HCI_MEM_POOL_ENABLED 0
|
|
#endif
|
|
// <o> HCI_TX_BUF_SIZE - TX buffer size in bytes.
|
|
#ifndef HCI_TX_BUF_SIZE
|
|
#define HCI_TX_BUF_SIZE 600
|
|
#endif
|
|
|
|
// <o> HCI_RX_BUF_SIZE - RX buffer size in bytes.
|
|
#ifndef HCI_RX_BUF_SIZE
|
|
#define HCI_RX_BUF_SIZE 600
|
|
#endif
|
|
|
|
// <o> HCI_RX_BUF_QUEUE_SIZE - RX buffer queue size.
|
|
#ifndef HCI_RX_BUF_QUEUE_SIZE
|
|
#define HCI_RX_BUF_QUEUE_SIZE 4
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// <e> HCI_SLIP_ENABLED - hci_slip - SLIP protocol implementation used by HCI
|
|
//==========================================================
|
|
#ifndef HCI_SLIP_ENABLED
|
|
#define HCI_SLIP_ENABLED 0
|
|
#endif
|
|
// <o> HCI_UART_BAUDRATE - Default Baudrate
|
|
|
|
// <323584=> 1200 baud
|
|
// <643072=> 2400 baud
|
|
// <1290240=> 4800 baud
|
|
// <2576384=> 9600 baud
|
|
// <3862528=> 14400 baud
|
|
// <5152768=> 19200 baud
|
|
// <7716864=> 28800 baud
|
|
// <10289152=> 38400 baud
|
|
// <15400960=> 57600 baud
|
|
// <20615168=> 76800 baud
|
|
// <30801920=> 115200 baud
|
|
// <61865984=> 230400 baud
|
|
// <67108864=> 250000 baud
|
|
// <121634816=> 460800 baud
|
|
// <251658240=> 921600 baud
|
|
// <268435456=> 1000000 baud
|
|
|
|
#ifndef HCI_UART_BAUDRATE
|
|
#define HCI_UART_BAUDRATE 30801920
|
|
#endif
|
|
|
|
// <o> HCI_UART_FLOW_CONTROL - Hardware Flow Control
|
|
|
|
// <0=> Disabled
|
|
// <1=> Enabled
|
|
|
|
#ifndef HCI_UART_FLOW_CONTROL
|
|
#define HCI_UART_FLOW_CONTROL 0
|
|
#endif
|
|
|
|
// <o> HCI_UART_RX_PIN - UART RX pin
|
|
#ifndef HCI_UART_RX_PIN
|
|
#define HCI_UART_RX_PIN 31
|
|
#endif
|
|
|
|
// <o> HCI_UART_TX_PIN - UART TX pin
|
|
#ifndef HCI_UART_TX_PIN
|
|
#define HCI_UART_TX_PIN 31
|
|
#endif
|
|
|
|
// <o> HCI_UART_RTS_PIN - UART RTS pin
|
|
#ifndef HCI_UART_RTS_PIN
|
|
#define HCI_UART_RTS_PIN 31
|
|
#endif
|
|
|
|
// <o> HCI_UART_CTS_PIN - UART CTS pin
|
|
#ifndef HCI_UART_CTS_PIN
|
|
#define HCI_UART_CTS_PIN 31
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// <e> HCI_TRANSPORT_ENABLED - hci_transport - HCI transport
|
|
//==========================================================
|
|
#ifndef HCI_TRANSPORT_ENABLED
|
|
#define HCI_TRANSPORT_ENABLED 0
|
|
#endif
|
|
// <o> HCI_MAX_PACKET_SIZE_IN_BITS - Maximum size of a single application packet in bits.
|
|
#ifndef HCI_MAX_PACKET_SIZE_IN_BITS
|
|
#define HCI_MAX_PACKET_SIZE_IN_BITS 8000
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// <q> LED_SOFTBLINK_ENABLED - led_softblink - led_softblink module
|
|
|
|
#ifndef LED_SOFTBLINK_ENABLED
|
|
#define LED_SOFTBLINK_ENABLED 0
|
|
#endif
|
|
|
|
// <q> LOW_POWER_PWM_ENABLED - low_power_pwm - low_power_pwm module
|
|
|
|
#ifndef LOW_POWER_PWM_ENABLED
|
|
#define LOW_POWER_PWM_ENABLED 0
|
|
#endif
|
|
|
|
// <e> MEM_MANAGER_ENABLED - mem_manager - Dynamic memory allocator
|
|
//==========================================================
|
|
#ifndef MEM_MANAGER_ENABLED
|
|
#define MEM_MANAGER_ENABLED 0
|
|
#endif
|
|
// <o> MEMORY_MANAGER_SMALL_BLOCK_COUNT - Size of each memory blocks identified as 'small' block. <0-255>
|
|
|
|
#ifndef MEMORY_MANAGER_SMALL_BLOCK_COUNT
|
|
#define MEMORY_MANAGER_SMALL_BLOCK_COUNT 1
|
|
#endif
|
|
|
|
// <o> MEMORY_MANAGER_SMALL_BLOCK_SIZE - Size of each memory blocks identified as 'small' block.
|
|
// <i> Size of each memory blocks identified as 'small' block. Memory block are recommended to be word-sized.
|
|
|
|
#ifndef MEMORY_MANAGER_SMALL_BLOCK_SIZE
|
|
#define MEMORY_MANAGER_SMALL_BLOCK_SIZE 32
|
|
#endif
|
|
|
|
// <o> MEMORY_MANAGER_MEDIUM_BLOCK_COUNT - Size of each memory blocks identified as 'medium' block. <0-255>
|
|
|
|
#ifndef MEMORY_MANAGER_MEDIUM_BLOCK_COUNT
|
|
#define MEMORY_MANAGER_MEDIUM_BLOCK_COUNT 0
|
|
#endif
|
|
|
|
// <o> MEMORY_MANAGER_MEDIUM_BLOCK_SIZE - Size of each memory blocks identified as 'medium' block.
|
|
// <i> Size of each memory blocks identified as 'medium' block. Memory block are recommended to be word-sized.
|
|
|
|
#ifndef MEMORY_MANAGER_MEDIUM_BLOCK_SIZE
|
|
#define MEMORY_MANAGER_MEDIUM_BLOCK_SIZE 256
|
|
#endif
|
|
|
|
// <o> MEMORY_MANAGER_LARGE_BLOCK_COUNT - Size of each memory blocks identified as 'large' block. <0-255>
|
|
|
|
#ifndef MEMORY_MANAGER_LARGE_BLOCK_COUNT
|
|
#define MEMORY_MANAGER_LARGE_BLOCK_COUNT 0
|
|
#endif
|
|
|
|
// <o> MEMORY_MANAGER_LARGE_BLOCK_SIZE - Size of each memory blocks identified as 'large' block.
|
|
// <i> Size of each memory blocks identified as 'large' block. Memory block are recommended to be word-sized.
|
|
|
|
#ifndef MEMORY_MANAGER_LARGE_BLOCK_SIZE
|
|
#define MEMORY_MANAGER_LARGE_BLOCK_SIZE 256
|
|
#endif
|
|
|
|
// <o> MEMORY_MANAGER_XLARGE_BLOCK_COUNT - Size of each memory blocks identified as 'extra large' block. <0-255>
|
|
|
|
#ifndef MEMORY_MANAGER_XLARGE_BLOCK_COUNT
|
|
#define MEMORY_MANAGER_XLARGE_BLOCK_COUNT 0
|
|
#endif
|
|
|
|
// <o> MEMORY_MANAGER_XLARGE_BLOCK_SIZE - Size of each memory blocks identified as 'extra large' block.
|
|
// <i> Size of each memory blocks identified as 'extra large' block. Memory block are recommended to be word-sized.
|
|
|
|
#ifndef MEMORY_MANAGER_XLARGE_BLOCK_SIZE
|
|
#define MEMORY_MANAGER_XLARGE_BLOCK_SIZE 1320
|
|
#endif
|
|
|
|
// <o> MEMORY_MANAGER_XXLARGE_BLOCK_COUNT - Size of each memory blocks identified as 'extra extra large' block. <0-255>
|
|
|
|
#ifndef MEMORY_MANAGER_XXLARGE_BLOCK_COUNT
|
|
#define MEMORY_MANAGER_XXLARGE_BLOCK_COUNT 0
|
|
#endif
|
|
|
|
// <o> MEMORY_MANAGER_XXLARGE_BLOCK_SIZE - Size of each memory blocks identified as 'extra extra large' block.
|
|
// <i> Size of each memory blocks identified as 'extra extra large' block. Memory block are recommended to be word-sized.
|
|
|
|
#ifndef MEMORY_MANAGER_XXLARGE_BLOCK_SIZE
|
|
#define MEMORY_MANAGER_XXLARGE_BLOCK_SIZE 3444
|
|
#endif
|
|
|
|
// <o> MEMORY_MANAGER_XSMALL_BLOCK_COUNT - Size of each memory blocks identified as 'extra small' block. <0-255>
|
|
|
|
#ifndef MEMORY_MANAGER_XSMALL_BLOCK_COUNT
|
|
#define MEMORY_MANAGER_XSMALL_BLOCK_COUNT 0
|
|
#endif
|
|
|
|
// <o> MEMORY_MANAGER_XSMALL_BLOCK_SIZE - Size of each memory blocks identified as 'extra small' block.
|
|
// <i> Size of each memory blocks identified as 'extra large' block. Memory block are recommended to be word-sized.
|
|
|
|
#ifndef MEMORY_MANAGER_XSMALL_BLOCK_SIZE
|
|
#define MEMORY_MANAGER_XSMALL_BLOCK_SIZE 64
|
|
#endif
|
|
|
|
// <o> MEMORY_MANAGER_XXSMALL_BLOCK_COUNT - Size of each memory blocks identified as 'extra extra small' block. <0-255>
|
|
|
|
#ifndef MEMORY_MANAGER_XXSMALL_BLOCK_COUNT
|
|
#define MEMORY_MANAGER_XXSMALL_BLOCK_COUNT 0
|
|
#endif
|
|
|
|
// <o> MEMORY_MANAGER_XXSMALL_BLOCK_SIZE - Size of each memory blocks identified as 'extra extra small' block.
|
|
// <i> Size of each memory blocks identified as 'extra extra small' block. Memory block are recommended to be word-sized.
|
|
|
|
#ifndef MEMORY_MANAGER_XXSMALL_BLOCK_SIZE
|
|
#define MEMORY_MANAGER_XXSMALL_BLOCK_SIZE 32
|
|
#endif
|
|
|
|
// <e> MEM_MANAGER_CONFIG_LOG_ENABLED - Enables logging in the module.
|
|
//==========================================================
|
|
#ifndef MEM_MANAGER_CONFIG_LOG_ENABLED
|
|
#define MEM_MANAGER_CONFIG_LOG_ENABLED 0
|
|
#endif
|
|
// <o> MEM_MANAGER_CONFIG_LOG_LEVEL - Default Severity level
|
|
|
|
// <0=> Off
|
|
// <1=> Error
|
|
// <2=> Warning
|
|
// <3=> Info
|
|
// <4=> Debug
|
|
|
|
#ifndef MEM_MANAGER_CONFIG_LOG_LEVEL
|
|
#define MEM_MANAGER_CONFIG_LOG_LEVEL 3
|
|
#endif
|
|
|
|
// <o> MEM_MANAGER_CONFIG_INFO_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef MEM_MANAGER_CONFIG_INFO_COLOR
|
|
#define MEM_MANAGER_CONFIG_INFO_COLOR 0
|
|
#endif
|
|
|
|
// <o> MEM_MANAGER_CONFIG_DEBUG_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef MEM_MANAGER_CONFIG_DEBUG_COLOR
|
|
#define MEM_MANAGER_CONFIG_DEBUG_COLOR 0
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// <q> MEM_MANAGER_DISABLE_API_PARAM_CHECK - Disable API parameter checks in the module.
|
|
|
|
#ifndef MEM_MANAGER_DISABLE_API_PARAM_CHECK
|
|
#define MEM_MANAGER_DISABLE_API_PARAM_CHECK 0
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// <e> NRF_BALLOC_ENABLED - nrf_balloc - Block allocator module
|
|
//==========================================================
|
|
#ifndef NRF_BALLOC_ENABLED
|
|
#define NRF_BALLOC_ENABLED 1
|
|
#endif
|
|
// <e> NRF_BALLOC_CONFIG_DEBUG_ENABLED - Enables debug mode in the module.
|
|
//==========================================================
|
|
#ifndef NRF_BALLOC_CONFIG_DEBUG_ENABLED
|
|
#define NRF_BALLOC_CONFIG_DEBUG_ENABLED 0
|
|
#endif
|
|
// <o> NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS - Number of words used as head guard. <0-255>
|
|
|
|
#ifndef NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS
|
|
#define NRF_BALLOC_CONFIG_HEAD_GUARD_WORDS 1
|
|
#endif
|
|
|
|
// <o> NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS - Number of words used as tail guard. <0-255>
|
|
|
|
#ifndef NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS
|
|
#define NRF_BALLOC_CONFIG_TAIL_GUARD_WORDS 1
|
|
#endif
|
|
|
|
// <q> NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED - Enables basic checks in this module.
|
|
|
|
#ifndef NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED
|
|
#define NRF_BALLOC_CONFIG_BASIC_CHECKS_ENABLED 0
|
|
#endif
|
|
|
|
// <q> NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED - Enables double memory free check in this module.
|
|
|
|
#ifndef NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED
|
|
#define NRF_BALLOC_CONFIG_DOUBLE_FREE_CHECK_ENABLED 0
|
|
#endif
|
|
|
|
// <q> NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED - Enables free memory corruption check in this module.
|
|
|
|
#ifndef NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED
|
|
#define NRF_BALLOC_CONFIG_DATA_TRASHING_CHECK_ENABLED 0
|
|
#endif
|
|
|
|
// <q> NRF_BALLOC_CLI_CMDS - Enable CLI commands specific to the module
|
|
|
|
#ifndef NRF_BALLOC_CLI_CMDS
|
|
#define NRF_BALLOC_CLI_CMDS 0
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// </e>
|
|
|
|
// <e> NRF_CSENSE_ENABLED - nrf_csense - Capacitive sensor module
|
|
//==========================================================
|
|
#ifndef NRF_CSENSE_ENABLED
|
|
#define NRF_CSENSE_ENABLED 0
|
|
#endif
|
|
// <o> NRF_CSENSE_PAD_HYSTERESIS - Minimum value of change required to determine that a pad was touched.
|
|
#ifndef NRF_CSENSE_PAD_HYSTERESIS
|
|
#define NRF_CSENSE_PAD_HYSTERESIS 15
|
|
#endif
|
|
|
|
// <o> NRF_CSENSE_PAD_DEVIATION - Minimum value measured on a pad required to take it into account while calculating the step.
|
|
#ifndef NRF_CSENSE_PAD_DEVIATION
|
|
#define NRF_CSENSE_PAD_DEVIATION 70
|
|
#endif
|
|
|
|
// <o> NRF_CSENSE_MIN_PAD_VALUE - Minimum normalized value on a pad required to take its value into account.
|
|
#ifndef NRF_CSENSE_MIN_PAD_VALUE
|
|
#define NRF_CSENSE_MIN_PAD_VALUE 20
|
|
#endif
|
|
|
|
// <o> NRF_CSENSE_MAX_PADS_NUMBER - Maximum number of pads used for one instance.
|
|
#ifndef NRF_CSENSE_MAX_PADS_NUMBER
|
|
#define NRF_CSENSE_MAX_PADS_NUMBER 20
|
|
#endif
|
|
|
|
// <o> NRF_CSENSE_MAX_VALUE - Maximum normalized value obtained from measurement.
|
|
#ifndef NRF_CSENSE_MAX_VALUE
|
|
#define NRF_CSENSE_MAX_VALUE 1000
|
|
#endif
|
|
|
|
// <o> NRF_CSENSE_OUTPUT_PIN - Output pin used by the low-level module.
|
|
// <i> This is used when capacitive sensor does not use COMP.
|
|
|
|
#ifndef NRF_CSENSE_OUTPUT_PIN
|
|
#define NRF_CSENSE_OUTPUT_PIN 26
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// <e> NRF_DRV_CSENSE_ENABLED - nrf_drv_csense - Capacitive sensor low-level module
|
|
//==========================================================
|
|
#ifndef NRF_DRV_CSENSE_ENABLED
|
|
#define NRF_DRV_CSENSE_ENABLED 0
|
|
#endif
|
|
// <e> USE_COMP - Use the comparator to implement the capacitive sensor driver.
|
|
|
|
// <i> Due to Anomaly 84, COMP I_SOURCE is not functional. It has too high a variation.
|
|
//==========================================================
|
|
#ifndef USE_COMP
|
|
#define USE_COMP 0
|
|
#endif
|
|
// <o> TIMER0_FOR_CSENSE - First TIMER instance used by the driver (not used on nRF51).
|
|
#ifndef TIMER0_FOR_CSENSE
|
|
#define TIMER0_FOR_CSENSE 1
|
|
#endif
|
|
|
|
// <o> TIMER1_FOR_CSENSE - Second TIMER instance used by the driver (not used on nRF51).
|
|
#ifndef TIMER1_FOR_CSENSE
|
|
#define TIMER1_FOR_CSENSE 2
|
|
#endif
|
|
|
|
// <o> MEASUREMENT_PERIOD - Single measurement period.
|
|
// <i> Time of a single measurement can be calculated as
|
|
// <i> T = (1/2)*MEASUREMENT_PERIOD*(1/f_OSC) where f_OSC = I_SOURCE / (2C*(VUP-VDOWN) ).
|
|
// <i> I_SOURCE, VUP, and VDOWN are values used to initialize COMP and C is the capacitance of the used pad.
|
|
|
|
#ifndef MEASUREMENT_PERIOD
|
|
#define MEASUREMENT_PERIOD 20
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// </e>
|
|
|
|
// <e> NRF_FSTORAGE_ENABLED - nrf_fstorage - Flash abstraction library
|
|
//==========================================================
|
|
#ifndef NRF_FSTORAGE_ENABLED
|
|
#define NRF_FSTORAGE_ENABLED 1
|
|
#endif
|
|
// <h> nrf_fstorage - Common settings
|
|
|
|
// <i> Common settings to all fstorage implementations
|
|
//==========================================================
|
|
// <q> NRF_FSTORAGE_PARAM_CHECK_DISABLED - Disable user input validation
|
|
|
|
// <i> If selected, use ASSERT to validate user input.
|
|
// <i> This effectively removes user input validation in production code.
|
|
// <i> Recommended setting: OFF, only enable this setting if size is a major concern.
|
|
|
|
#ifndef NRF_FSTORAGE_PARAM_CHECK_DISABLED
|
|
#define NRF_FSTORAGE_PARAM_CHECK_DISABLED 0
|
|
#endif
|
|
|
|
// </h>
|
|
//==========================================================
|
|
|
|
// <h> nrf_fstorage_sd - Implementation using the SoftDevice
|
|
|
|
// <i> Configuration options for the fstorage implementation using the SoftDevice
|
|
//==========================================================
|
|
// <o> NRF_FSTORAGE_SD_QUEUE_SIZE - Size of the internal queue of operations
|
|
// <i> Increase this value if API calls frequently return the error @ref NRF_ERROR_NO_MEM.
|
|
|
|
#ifndef NRF_FSTORAGE_SD_QUEUE_SIZE
|
|
#define NRF_FSTORAGE_SD_QUEUE_SIZE 4
|
|
#endif
|
|
|
|
// <o> NRF_FSTORAGE_SD_MAX_RETRIES - Maximum number of attempts at executing an operation when the SoftDevice is busy
|
|
// <i> Increase this value if events frequently return the @ref NRF_ERROR_TIMEOUT error.
|
|
// <i> The SoftDevice might fail to schedule flash access due to high BLE activity.
|
|
|
|
#ifndef NRF_FSTORAGE_SD_MAX_RETRIES
|
|
#define NRF_FSTORAGE_SD_MAX_RETRIES 8
|
|
#endif
|
|
|
|
// <o> NRF_FSTORAGE_SD_MAX_WRITE_SIZE - Maximum number of bytes to be written to flash in a single operation
|
|
// <i> This value must be a multiple of four.
|
|
// <i> Lowering this value can increase the chances of the SoftDevice being able to execute flash operations in between radio activity.
|
|
// <i> This value is bound by the maximum number of bytes that can be written to flash in a single call to @ref sd_flash_write.
|
|
// <i> That is 1024 bytes for nRF51 ICs and 4096 bytes for nRF52 ICs.
|
|
|
|
#ifndef NRF_FSTORAGE_SD_MAX_WRITE_SIZE
|
|
#define NRF_FSTORAGE_SD_MAX_WRITE_SIZE 4096
|
|
#endif
|
|
|
|
// </h>
|
|
//==========================================================
|
|
|
|
// </e>
|
|
|
|
// <q> NRF_GFX_ENABLED - nrf_gfx - GFX module
|
|
|
|
#ifndef NRF_GFX_ENABLED
|
|
#define NRF_GFX_ENABLED 1
|
|
#endif
|
|
|
|
#ifndef ST7735_ENABLED
|
|
#define ST7735_ENABLED 0
|
|
#endif
|
|
|
|
// <q> NRF_MEMOBJ_ENABLED - nrf_memobj - Linked memory allocator module
|
|
|
|
#ifndef NRF_MEMOBJ_ENABLED
|
|
#define NRF_MEMOBJ_ENABLED 1
|
|
#endif
|
|
|
|
// <e> NRF_PWR_MGMT_ENABLED - nrf_pwr_mgmt - Power management module
|
|
//==========================================================
|
|
#ifndef NRF_PWR_MGMT_ENABLED
|
|
#define NRF_PWR_MGMT_ENABLED 0
|
|
#endif
|
|
// <e> NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED - Enables pin debug in the module.
|
|
|
|
// <i> Selected pin will be set when CPU is in sleep mode.
|
|
//==========================================================
|
|
#ifndef NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED
|
|
#define NRF_PWR_MGMT_CONFIG_DEBUG_PIN_ENABLED 0
|
|
#endif
|
|
// <o> NRF_PWR_MGMT_SLEEP_DEBUG_PIN - Pin number
|
|
|
|
// <0=> 0 (P0.0)
|
|
// <1=> 1 (P0.1)
|
|
// <2=> 2 (P0.2)
|
|
// <3=> 3 (P0.3)
|
|
// <4=> 4 (P0.4)
|
|
// <5=> 5 (P0.5)
|
|
// <6=> 6 (P0.6)
|
|
// <7=> 7 (P0.7)
|
|
// <8=> 8 (P0.8)
|
|
// <9=> 9 (P0.9)
|
|
// <10=> 10 (P0.10)
|
|
// <11=> 11 (P0.11)
|
|
// <12=> 12 (P0.12)
|
|
// <13=> 13 (P0.13)
|
|
// <14=> 14 (P0.14)
|
|
// <15=> 15 (P0.15)
|
|
// <16=> 16 (P0.16)
|
|
// <17=> 17 (P0.17)
|
|
// <18=> 18 (P0.18)
|
|
// <19=> 19 (P0.19)
|
|
// <20=> 20 (P0.20)
|
|
// <21=> 21 (P0.21)
|
|
// <22=> 22 (P0.22)
|
|
// <23=> 23 (P0.23)
|
|
// <24=> 24 (P0.24)
|
|
// <25=> 25 (P0.25)
|
|
// <26=> 26 (P0.26)
|
|
// <27=> 27 (P0.27)
|
|
// <28=> 28 (P0.28)
|
|
// <29=> 29 (P0.29)
|
|
// <30=> 30 (P0.30)
|
|
// <31=> 31 (P0.31)
|
|
// <4294967295=> Not connected
|
|
|
|
#ifndef NRF_PWR_MGMT_SLEEP_DEBUG_PIN
|
|
#define NRF_PWR_MGMT_SLEEP_DEBUG_PIN 31
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// <q> NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED - Enables CPU usage monitor.
|
|
|
|
// <i> Module will trace percentage of CPU usage in one second intervals.
|
|
|
|
#ifndef NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED
|
|
#define NRF_PWR_MGMT_CONFIG_CPU_USAGE_MONITOR_ENABLED 0
|
|
#endif
|
|
|
|
// <e> NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED - Enable standby timeout.
|
|
//==========================================================
|
|
#ifndef NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED
|
|
#define NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_ENABLED 0
|
|
#endif
|
|
// <o> NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S - Standby timeout (in seconds).
|
|
// <i> Shutdown procedure will begin no earlier than after this number of seconds.
|
|
|
|
#ifndef NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S
|
|
#define NRF_PWR_MGMT_CONFIG_STANDBY_TIMEOUT_S 3
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// <q> NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED - Enables FPU event cleaning.
|
|
|
|
#ifndef NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED
|
|
#define NRF_PWR_MGMT_CONFIG_FPU_SUPPORT_ENABLED 0
|
|
#endif
|
|
|
|
// <q> NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY - Blocked shutdown procedure will be retried every second.
|
|
|
|
#ifndef NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY
|
|
#define NRF_PWR_MGMT_CONFIG_AUTO_SHUTDOWN_RETRY 0
|
|
#endif
|
|
|
|
// <q> NRF_PWR_MGMT_CONFIG_USE_SCHEDULER - Module will use @ref app_scheduler.
|
|
|
|
#ifndef NRF_PWR_MGMT_CONFIG_USE_SCHEDULER
|
|
#define NRF_PWR_MGMT_CONFIG_USE_SCHEDULER 0
|
|
#endif
|
|
|
|
// <o> NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT - The number of priorities for module handlers.
|
|
// <i> The number of stages of the shutdown process.
|
|
|
|
#ifndef NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT
|
|
#define NRF_PWR_MGMT_CONFIG_HANDLER_PRIORITY_COUNT 3
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// <e> NRF_QUEUE_ENABLED - nrf_queue - Queue module
|
|
//==========================================================
|
|
#ifndef NRF_QUEUE_ENABLED
|
|
#define NRF_QUEUE_ENABLED 0
|
|
#endif
|
|
// <q> NRF_QUEUE_CLI_CMDS - Enable CLI commands specific to the module
|
|
|
|
#ifndef NRF_QUEUE_CLI_CMDS
|
|
#define NRF_QUEUE_CLI_CMDS 0
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// <q> NRF_SECTION_ITER_ENABLED - nrf_section_iter - Section iterator
|
|
|
|
#ifndef NRF_SECTION_ITER_ENABLED
|
|
#define NRF_SECTION_ITER_ENABLED 1
|
|
#endif
|
|
|
|
// <q> NRF_SORTLIST_ENABLED - nrf_sortlist - Sorted list
|
|
|
|
#ifndef NRF_SORTLIST_ENABLED
|
|
#define NRF_SORTLIST_ENABLED 0
|
|
#endif
|
|
|
|
// <q> NRF_SPI_MNGR_ENABLED - nrf_spi_mngr - SPI transaction manager
|
|
|
|
#ifndef NRF_SPI_MNGR_ENABLED
|
|
#define NRF_SPI_MNGR_ENABLED 0
|
|
#endif
|
|
|
|
// <q> NRF_STRERROR_ENABLED - nrf_strerror - Library for converting error code to string.
|
|
|
|
#ifndef NRF_STRERROR_ENABLED
|
|
#define NRF_STRERROR_ENABLED 1
|
|
#endif
|
|
|
|
// <q> NRF_TWI_MNGR_ENABLED - nrf_twi_mngr - TWI transaction manager
|
|
|
|
#ifndef NRF_TWI_MNGR_ENABLED
|
|
#define NRF_TWI_MNGR_ENABLED 0
|
|
#endif
|
|
|
|
// <q> SLIP_ENABLED - slip - SLIP encoding and decoding
|
|
|
|
#ifndef SLIP_ENABLED
|
|
#define SLIP_ENABLED 0
|
|
#endif
|
|
|
|
// <e> TASK_MANAGER_ENABLED - task_manager - Task manager.
|
|
//==========================================================
|
|
#ifndef TASK_MANAGER_ENABLED
|
|
#define TASK_MANAGER_ENABLED 0
|
|
#endif
|
|
// <q> TASK_MANAGER_CLI_CMDS - Enable CLI commands specific to the module
|
|
|
|
#ifndef TASK_MANAGER_CLI_CMDS
|
|
#define TASK_MANAGER_CLI_CMDS 0
|
|
#endif
|
|
|
|
// <o> TASK_MANAGER_CONFIG_MAX_TASKS - Maximum number of tasks which can be created
|
|
#ifndef TASK_MANAGER_CONFIG_MAX_TASKS
|
|
#define TASK_MANAGER_CONFIG_MAX_TASKS 2
|
|
#endif
|
|
|
|
// <o> TASK_MANAGER_CONFIG_STACK_SIZE - Stack size for every task (power of 2)
|
|
#ifndef TASK_MANAGER_CONFIG_STACK_SIZE
|
|
#define TASK_MANAGER_CONFIG_STACK_SIZE 1024
|
|
#endif
|
|
|
|
// <q> TASK_MANAGER_CONFIG_STACK_PROFILER_ENABLED - Enable stack profiling.
|
|
|
|
#ifndef TASK_MANAGER_CONFIG_STACK_PROFILER_ENABLED
|
|
#define TASK_MANAGER_CONFIG_STACK_PROFILER_ENABLED 1
|
|
#endif
|
|
|
|
// <o> TASK_MANAGER_CONFIG_STACK_GUARD - Configures stack guard.
|
|
|
|
// <0=> Disabled
|
|
// <4=> 32 bytes
|
|
// <5=> 64 bytes
|
|
// <6=> 128 bytes
|
|
// <7=> 256 bytes
|
|
// <8=> 512 bytes
|
|
|
|
#ifndef TASK_MANAGER_CONFIG_STACK_GUARD
|
|
#define TASK_MANAGER_CONFIG_STACK_GUARD 7
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// <h> app_button - buttons handling module
|
|
|
|
//==========================================================
|
|
// <q> BUTTON_ENABLED - Enables Button module
|
|
|
|
#ifndef BUTTON_ENABLED
|
|
#define BUTTON_ENABLED 1
|
|
#endif
|
|
|
|
// <q> BUTTON_HIGH_ACCURACY_ENABLED - Enables GPIOTE high accuracy for buttons
|
|
|
|
#ifndef BUTTON_HIGH_ACCURACY_ENABLED
|
|
#define BUTTON_HIGH_ACCURACY_ENABLED 0
|
|
#endif
|
|
|
|
// </h>
|
|
//==========================================================
|
|
|
|
// <h> app_usbd_cdc_acm - USB CDC ACM class
|
|
|
|
//==========================================================
|
|
// <q> APP_USBD_CDC_ACM_ENABLED - Enabling USBD CDC ACM Class library
|
|
|
|
#ifndef APP_USBD_CDC_ACM_ENABLED
|
|
#define APP_USBD_CDC_ACM_ENABLED 0
|
|
#endif
|
|
|
|
// <q> APP_USBD_CDC_ACM_ZLP_ON_EPSIZE_WRITE - Send ZLP on write with same size as endpoint
|
|
|
|
// <i> If enabled, CDC ACM class will automatically send a zero length packet after transfer which has the same size as endpoint.
|
|
// <i> This may limit throughput if a lot of binary data is sent, but in terminal mode operation it makes sure that the data is always
|
|
// displayed right after it is sent.
|
|
|
|
#ifndef APP_USBD_CDC_ACM_ZLP_ON_EPSIZE_WRITE
|
|
#define APP_USBD_CDC_ACM_ZLP_ON_EPSIZE_WRITE 1
|
|
#endif
|
|
|
|
// </h>
|
|
//==========================================================
|
|
|
|
// <h> nrf_cli - Command line interface
|
|
|
|
//==========================================================
|
|
// <q> NRF_CLI_ENABLED - Enable/disable the CLI module.
|
|
|
|
#ifndef NRF_CLI_ENABLED
|
|
#define NRF_CLI_ENABLED 0
|
|
#endif
|
|
|
|
// <o> NRF_CLI_ARGC_MAX - Maximum number of parameters passed to the command handler.
|
|
#ifndef NRF_CLI_ARGC_MAX
|
|
#define NRF_CLI_ARGC_MAX 12
|
|
#endif
|
|
|
|
// <q> NRF_CLI_BUILD_IN_CMDS_ENABLED - CLI built-in commands.
|
|
|
|
#ifndef NRF_CLI_BUILD_IN_CMDS_ENABLED
|
|
#define NRF_CLI_BUILD_IN_CMDS_ENABLED 1
|
|
#endif
|
|
|
|
// <o> NRF_CLI_CMD_BUFF_SIZE - Maximum buffer size for a single command.
|
|
#ifndef NRF_CLI_CMD_BUFF_SIZE
|
|
#define NRF_CLI_CMD_BUFF_SIZE 128
|
|
#endif
|
|
|
|
// <q> NRF_CLI_ECHO_STATUS - CLI echo status. If set, echo is ON.
|
|
|
|
#ifndef NRF_CLI_ECHO_STATUS
|
|
#define NRF_CLI_ECHO_STATUS 1
|
|
#endif
|
|
|
|
// <q> NRF_CLI_WILDCARD_ENABLED - Enable wildcard functionality for CLI commands.
|
|
|
|
#ifndef NRF_CLI_WILDCARD_ENABLED
|
|
#define NRF_CLI_WILDCARD_ENABLED 0
|
|
#endif
|
|
|
|
// <q> NRF_CLI_METAKEYS_ENABLED - Enable additional control keys for CLI commands like ctrl+a, ctrl+e, ctrl+w, ctrl+u
|
|
|
|
#ifndef NRF_CLI_METAKEYS_ENABLED
|
|
#define NRF_CLI_METAKEYS_ENABLED 0
|
|
#endif
|
|
|
|
// <o> NRF_CLI_PRINTF_BUFF_SIZE - Maximum print buffer size.
|
|
#ifndef NRF_CLI_PRINTF_BUFF_SIZE
|
|
#define NRF_CLI_PRINTF_BUFF_SIZE 23
|
|
#endif
|
|
|
|
// <e> NRF_CLI_HISTORY_ENABLED - Enable CLI history mode.
|
|
//==========================================================
|
|
#ifndef NRF_CLI_HISTORY_ENABLED
|
|
#define NRF_CLI_HISTORY_ENABLED 1
|
|
#endif
|
|
// <o> NRF_CLI_HISTORY_ELEMENT_SIZE - Size of one memory object reserved for CLI history.
|
|
#ifndef NRF_CLI_HISTORY_ELEMENT_SIZE
|
|
#define NRF_CLI_HISTORY_ELEMENT_SIZE 32
|
|
#endif
|
|
|
|
// <o> NRF_CLI_HISTORY_ELEMENT_COUNT - Number of history memory objects.
|
|
#ifndef NRF_CLI_HISTORY_ELEMENT_COUNT
|
|
#define NRF_CLI_HISTORY_ELEMENT_COUNT 8
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// <q> NRF_CLI_VT100_COLORS_ENABLED - CLI VT100 colors.
|
|
|
|
#ifndef NRF_CLI_VT100_COLORS_ENABLED
|
|
#define NRF_CLI_VT100_COLORS_ENABLED 1
|
|
#endif
|
|
|
|
// <q> NRF_CLI_STATISTICS_ENABLED - Enable CLI statistics.
|
|
|
|
#ifndef NRF_CLI_STATISTICS_ENABLED
|
|
#define NRF_CLI_STATISTICS_ENABLED 1
|
|
#endif
|
|
|
|
// <q> NRF_CLI_LOG_BACKEND - Enable logger backend interface.
|
|
|
|
#ifndef NRF_CLI_LOG_BACKEND
|
|
#define NRF_CLI_LOG_BACKEND 1
|
|
#endif
|
|
|
|
// <q> NRF_CLI_USES_TASK_MANAGER_ENABLED - Enable CLI to use task_manager
|
|
|
|
#ifndef NRF_CLI_USES_TASK_MANAGER_ENABLED
|
|
#define NRF_CLI_USES_TASK_MANAGER_ENABLED 0
|
|
#endif
|
|
|
|
// </h>
|
|
//==========================================================
|
|
|
|
// <h> nrf_fprintf - fprintf function.
|
|
|
|
//==========================================================
|
|
// <q> NRF_FPRINTF_ENABLED - Enable/disable fprintf module.
|
|
|
|
#ifndef NRF_FPRINTF_ENABLED
|
|
#define NRF_FPRINTF_ENABLED 1
|
|
#endif
|
|
|
|
// <q> NRF_FPRINTF_FLAG_AUTOMATIC_CR_ON_LF_ENABLED - For each printed LF, function will add CR.
|
|
|
|
#ifndef NRF_FPRINTF_FLAG_AUTOMATIC_CR_ON_LF_ENABLED
|
|
#define NRF_FPRINTF_FLAG_AUTOMATIC_CR_ON_LF_ENABLED 1
|
|
#endif
|
|
|
|
// </h>
|
|
//==========================================================
|
|
|
|
// </h>
|
|
//==========================================================
|
|
|
|
// <h> nRF_Log
|
|
|
|
//==========================================================
|
|
// <e> NRF_LOG_ENABLED - nrf_log - Logger
|
|
//==========================================================
|
|
#ifndef NRF_LOG_ENABLED
|
|
#define NRF_LOG_ENABLED 0
|
|
#endif
|
|
|
|
#ifndef NRF_LOG_BACKEND_RTT_ENABLED
|
|
#define NRF_LOG_BACKEND_RTT_ENABLED 0
|
|
#endif
|
|
|
|
#ifndef NRF_LOG_BACKEND_SERIAL_USES_RTT
|
|
#define NRF_LOG_BACKEND_SERIAL_USES_RTT 0
|
|
#endif
|
|
// <h> Log message pool - Configuration of log message pool
|
|
|
|
//==========================================================
|
|
// <o> NRF_LOG_MSGPOOL_ELEMENT_SIZE - Size of a single element in the pool of memory objects.
|
|
// <i> If a small value is set, then performance of logs processing
|
|
// <i> is degraded because data is fragmented. Bigger value impacts
|
|
// <i> RAM memory utilization. The size is set to fit a message with
|
|
// <i> a timestamp and up to 2 arguments in a single memory object.
|
|
|
|
#ifndef NRF_LOG_MSGPOOL_ELEMENT_SIZE
|
|
#define NRF_LOG_MSGPOOL_ELEMENT_SIZE 20
|
|
#endif
|
|
|
|
// <o> NRF_LOG_MSGPOOL_ELEMENT_COUNT - Number of elements in the pool of memory objects
|
|
// <i> If a small value is set, then it may lead to a deadlock
|
|
// <i> in certain cases if backend has high latency and holds
|
|
// <i> multiple messages for long time. Bigger value impacts
|
|
// <i> RAM memory usage.
|
|
|
|
#ifndef NRF_LOG_MSGPOOL_ELEMENT_COUNT
|
|
#define NRF_LOG_MSGPOOL_ELEMENT_COUNT 8
|
|
#endif
|
|
|
|
// </h>
|
|
//==========================================================
|
|
|
|
// <q> NRF_LOG_ALLOW_OVERFLOW - Configures behavior when circular buffer is full.
|
|
|
|
// <i> If set then oldest logs are overwritten. Otherwise a
|
|
// <i> marker is injected informing about overflow.
|
|
|
|
#ifndef NRF_LOG_ALLOW_OVERFLOW
|
|
#define NRF_LOG_ALLOW_OVERFLOW 1
|
|
#endif
|
|
|
|
// <o> NRF_LOG_BUFSIZE - Size of the buffer for storing logs (in bytes).
|
|
|
|
// <i> Must be power of 2 and multiple of 4.
|
|
// <i> If NRF_LOG_DEFERRED = 0 then buffer size can be reduced to minimum.
|
|
// <128=> 128
|
|
// <256=> 256
|
|
// <512=> 512
|
|
// <1024=> 1024
|
|
// <2048=> 2048
|
|
// <4096=> 4096
|
|
// <8192=> 8192
|
|
// <16384=> 16384
|
|
|
|
#ifndef NRF_LOG_BUFSIZE
|
|
#define NRF_LOG_BUFSIZE 1024
|
|
#endif
|
|
|
|
// <q> NRF_LOG_CLI_CMDS - Enable CLI commands for the module.
|
|
|
|
#ifndef NRF_LOG_CLI_CMDS
|
|
#define NRF_LOG_CLI_CMDS 0
|
|
#endif
|
|
|
|
// <o> NRF_LOG_DEFAULT_LEVEL - Default Severity level
|
|
|
|
// <0=> Off
|
|
// <1=> Error
|
|
// <2=> Warning
|
|
// <3=> Info
|
|
// <4=> Debug
|
|
|
|
#ifndef NRF_LOG_DEFAULT_LEVEL
|
|
#define NRF_LOG_DEFAULT_LEVEL 3
|
|
#endif
|
|
|
|
// <q> NRF_LOG_DEFERRED - Enable deferred logger.
|
|
|
|
// <i> Log data is buffered and can be processed in idle.
|
|
|
|
#ifndef NRF_LOG_DEFERRED
|
|
#define NRF_LOG_DEFERRED 1
|
|
#endif
|
|
|
|
// <q> NRF_LOG_FILTERS_ENABLED - Enable dynamic filtering of logs.
|
|
|
|
#ifndef NRF_LOG_FILTERS_ENABLED
|
|
#define NRF_LOG_FILTERS_ENABLED 0
|
|
#endif
|
|
|
|
// <o> NRF_LOG_STR_PUSH_BUFFER_SIZE - Size of the buffer dedicated for strings stored using @ref NRF_LOG_PUSH.
|
|
|
|
// <16=> 16
|
|
// <32=> 32
|
|
// <64=> 64
|
|
// <128=> 128
|
|
// <256=> 256
|
|
// <512=> 512
|
|
// <1024=> 1024
|
|
|
|
#ifndef NRF_LOG_STR_PUSH_BUFFER_SIZE
|
|
#define NRF_LOG_STR_PUSH_BUFFER_SIZE 128
|
|
#endif
|
|
|
|
// <o> NRF_LOG_STR_PUSH_BUFFER_SIZE - Size of the buffer dedicated for strings stored using @ref NRF_LOG_PUSH.
|
|
|
|
// <16=> 16
|
|
// <32=> 32
|
|
// <64=> 64
|
|
// <128=> 128
|
|
// <256=> 256
|
|
// <512=> 512
|
|
// <1024=> 1024
|
|
|
|
#ifndef NRF_LOG_STR_PUSH_BUFFER_SIZE
|
|
#define NRF_LOG_STR_PUSH_BUFFER_SIZE 128
|
|
#endif
|
|
|
|
// <e> NRF_LOG_USES_COLORS - If enabled then ANSI escape code for colors is prefixed to every string
|
|
//==========================================================
|
|
#ifndef NRF_LOG_USES_COLORS
|
|
#define NRF_LOG_USES_COLORS 0
|
|
#endif
|
|
// <o> NRF_LOG_COLOR_DEFAULT - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef NRF_LOG_COLOR_DEFAULT
|
|
#define NRF_LOG_COLOR_DEFAULT 0
|
|
#endif
|
|
|
|
// <o> NRF_LOG_ERROR_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef NRF_LOG_ERROR_COLOR
|
|
#define NRF_LOG_ERROR_COLOR 2
|
|
#endif
|
|
|
|
// <o> NRF_LOG_WARNING_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef NRF_LOG_WARNING_COLOR
|
|
#define NRF_LOG_WARNING_COLOR 4
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// <e> NRF_LOG_USES_TIMESTAMP - Enable timestamping
|
|
|
|
// <i> Function for getting the timestamp is provided by the user
|
|
//==========================================================
|
|
#ifndef NRF_LOG_USES_TIMESTAMP
|
|
#define NRF_LOG_USES_TIMESTAMP 0
|
|
#endif
|
|
// <o> NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY - Default frequency of the timestamp (in Hz) or 0 to use app_timer frequency.
|
|
#ifndef NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY
|
|
#define NRF_LOG_TIMESTAMP_DEFAULT_FREQUENCY 0
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// <h> nrf_log module configuration
|
|
|
|
//==========================================================
|
|
// <h> nrf_log in nRF_Core
|
|
|
|
//==========================================================
|
|
// <e> NRF_MPU_LIB_CONFIG_LOG_ENABLED - Enables logging in the module.
|
|
//==========================================================
|
|
#ifndef NRF_MPU_LIB_CONFIG_LOG_ENABLED
|
|
#define NRF_MPU_LIB_CONFIG_LOG_ENABLED 0
|
|
#endif
|
|
// <o> NRF_MPU_LIB_CONFIG_LOG_LEVEL - Default Severity level
|
|
|
|
// <0=> Off
|
|
// <1=> Error
|
|
// <2=> Warning
|
|
// <3=> Info
|
|
// <4=> Debug
|
|
|
|
#ifndef NRF_MPU_LIB_CONFIG_LOG_LEVEL
|
|
#define NRF_MPU_LIB_CONFIG_LOG_LEVEL 3
|
|
#endif
|
|
|
|
// <o> NRF_MPU_LIB_CONFIG_INFO_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef NRF_MPU_LIB_CONFIG_INFO_COLOR
|
|
#define NRF_MPU_LIB_CONFIG_INFO_COLOR 0
|
|
#endif
|
|
|
|
// <o> NRF_MPU_LIB_CONFIG_DEBUG_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef NRF_MPU_LIB_CONFIG_DEBUG_COLOR
|
|
#define NRF_MPU_LIB_CONFIG_DEBUG_COLOR 0
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// <e> NRF_STACK_GUARD_CONFIG_LOG_ENABLED - Enables logging in the module.
|
|
//==========================================================
|
|
#ifndef NRF_STACK_GUARD_CONFIG_LOG_ENABLED
|
|
#define NRF_STACK_GUARD_CONFIG_LOG_ENABLED 0
|
|
#endif
|
|
// <o> NRF_STACK_GUARD_CONFIG_LOG_LEVEL - Default Severity level
|
|
|
|
// <0=> Off
|
|
// <1=> Error
|
|
// <2=> Warning
|
|
// <3=> Info
|
|
// <4=> Debug
|
|
|
|
#ifndef NRF_STACK_GUARD_CONFIG_LOG_LEVEL
|
|
#define NRF_STACK_GUARD_CONFIG_LOG_LEVEL 3
|
|
#endif
|
|
|
|
// <o> NRF_STACK_GUARD_CONFIG_INFO_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef NRF_STACK_GUARD_CONFIG_INFO_COLOR
|
|
#define NRF_STACK_GUARD_CONFIG_INFO_COLOR 0
|
|
#endif
|
|
|
|
// <o> NRF_STACK_GUARD_CONFIG_DEBUG_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef NRF_STACK_GUARD_CONFIG_DEBUG_COLOR
|
|
#define NRF_STACK_GUARD_CONFIG_DEBUG_COLOR 0
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// <e> TASK_MANAGER_CONFIG_LOG_ENABLED - Enables logging in the module.
|
|
//==========================================================
|
|
#ifndef TASK_MANAGER_CONFIG_LOG_ENABLED
|
|
#define TASK_MANAGER_CONFIG_LOG_ENABLED 0
|
|
#endif
|
|
// <o> TASK_MANAGER_CONFIG_LOG_LEVEL - Default Severity level
|
|
|
|
// <0=> Off
|
|
// <1=> Error
|
|
// <2=> Warning
|
|
// <3=> Info
|
|
// <4=> Debug
|
|
|
|
#ifndef TASK_MANAGER_CONFIG_LOG_LEVEL
|
|
#define TASK_MANAGER_CONFIG_LOG_LEVEL 3
|
|
#endif
|
|
|
|
// <o> TASK_MANAGER_CONFIG_INFO_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef TASK_MANAGER_CONFIG_INFO_COLOR
|
|
#define TASK_MANAGER_CONFIG_INFO_COLOR 0
|
|
#endif
|
|
|
|
// <o> TASK_MANAGER_CONFIG_DEBUG_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef TASK_MANAGER_CONFIG_DEBUG_COLOR
|
|
#define TASK_MANAGER_CONFIG_DEBUG_COLOR 0
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// </h>
|
|
//==========================================================
|
|
|
|
// <h> nrf_log in nRF_Drivers
|
|
|
|
//==========================================================
|
|
// <e> CLOCK_CONFIG_LOG_ENABLED - Enables logging in the module.
|
|
//==========================================================
|
|
#ifndef CLOCK_CONFIG_LOG_ENABLED
|
|
#define CLOCK_CONFIG_LOG_ENABLED 0
|
|
#endif
|
|
// <o> CLOCK_CONFIG_LOG_LEVEL - Default Severity level
|
|
|
|
// <0=> Off
|
|
// <1=> Error
|
|
// <2=> Warning
|
|
// <3=> Info
|
|
// <4=> Debug
|
|
|
|
#ifndef CLOCK_CONFIG_LOG_LEVEL
|
|
#define CLOCK_CONFIG_LOG_LEVEL 3
|
|
#endif
|
|
|
|
// <o> CLOCK_CONFIG_INFO_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef CLOCK_CONFIG_INFO_COLOR
|
|
#define CLOCK_CONFIG_INFO_COLOR 0
|
|
#endif
|
|
|
|
// <o> CLOCK_CONFIG_DEBUG_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef CLOCK_CONFIG_DEBUG_COLOR
|
|
#define CLOCK_CONFIG_DEBUG_COLOR 0
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// <e> COMP_CONFIG_LOG_ENABLED - Enables logging in the module.
|
|
//==========================================================
|
|
#ifndef COMP_CONFIG_LOG_ENABLED
|
|
#define COMP_CONFIG_LOG_ENABLED 0
|
|
#endif
|
|
// <o> COMP_CONFIG_LOG_LEVEL - Default Severity level
|
|
|
|
// <0=> Off
|
|
// <1=> Error
|
|
// <2=> Warning
|
|
// <3=> Info
|
|
// <4=> Debug
|
|
|
|
#ifndef COMP_CONFIG_LOG_LEVEL
|
|
#define COMP_CONFIG_LOG_LEVEL 3
|
|
#endif
|
|
|
|
// <o> COMP_CONFIG_INFO_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef COMP_CONFIG_INFO_COLOR
|
|
#define COMP_CONFIG_INFO_COLOR 0
|
|
#endif
|
|
|
|
// <o> COMP_CONFIG_DEBUG_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef COMP_CONFIG_DEBUG_COLOR
|
|
#define COMP_CONFIG_DEBUG_COLOR 0
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// <e> GPIOTE_CONFIG_LOG_ENABLED - Enables logging in the module.
|
|
//==========================================================
|
|
#ifndef GPIOTE_CONFIG_LOG_ENABLED
|
|
#define GPIOTE_CONFIG_LOG_ENABLED 0
|
|
#endif
|
|
// <o> GPIOTE_CONFIG_LOG_LEVEL - Default Severity level
|
|
|
|
// <0=> Off
|
|
// <1=> Error
|
|
// <2=> Warning
|
|
// <3=> Info
|
|
// <4=> Debug
|
|
|
|
#ifndef GPIOTE_CONFIG_LOG_LEVEL
|
|
#define GPIOTE_CONFIG_LOG_LEVEL 3
|
|
#endif
|
|
|
|
// <o> GPIOTE_CONFIG_INFO_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef GPIOTE_CONFIG_INFO_COLOR
|
|
#define GPIOTE_CONFIG_INFO_COLOR 0
|
|
#endif
|
|
|
|
// <o> GPIOTE_CONFIG_DEBUG_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef GPIOTE_CONFIG_DEBUG_COLOR
|
|
#define GPIOTE_CONFIG_DEBUG_COLOR 0
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// <e> LPCOMP_CONFIG_LOG_ENABLED - Enables logging in the module.
|
|
//==========================================================
|
|
#ifndef LPCOMP_CONFIG_LOG_ENABLED
|
|
#define LPCOMP_CONFIG_LOG_ENABLED 0
|
|
#endif
|
|
// <o> LPCOMP_CONFIG_LOG_LEVEL - Default Severity level
|
|
|
|
// <0=> Off
|
|
// <1=> Error
|
|
// <2=> Warning
|
|
// <3=> Info
|
|
// <4=> Debug
|
|
|
|
#ifndef LPCOMP_CONFIG_LOG_LEVEL
|
|
#define LPCOMP_CONFIG_LOG_LEVEL 3
|
|
#endif
|
|
|
|
// <o> LPCOMP_CONFIG_INFO_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef LPCOMP_CONFIG_INFO_COLOR
|
|
#define LPCOMP_CONFIG_INFO_COLOR 0
|
|
#endif
|
|
|
|
// <o> LPCOMP_CONFIG_DEBUG_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef LPCOMP_CONFIG_DEBUG_COLOR
|
|
#define LPCOMP_CONFIG_DEBUG_COLOR 0
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// <e> MAX3421E_HOST_CONFIG_LOG_ENABLED - Enable logging in the module
|
|
//==========================================================
|
|
#ifndef MAX3421E_HOST_CONFIG_LOG_ENABLED
|
|
#define MAX3421E_HOST_CONFIG_LOG_ENABLED 0
|
|
#endif
|
|
// <o> MAX3421E_HOST_CONFIG_LOG_LEVEL - Default Severity level
|
|
|
|
// <0=> Off
|
|
// <1=> Error
|
|
// <2=> Warning
|
|
// <3=> Info
|
|
// <4=> Debug
|
|
|
|
#ifndef MAX3421E_HOST_CONFIG_LOG_LEVEL
|
|
#define MAX3421E_HOST_CONFIG_LOG_LEVEL 3
|
|
#endif
|
|
|
|
// <o> MAX3421E_HOST_CONFIG_INFO_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef MAX3421E_HOST_CONFIG_INFO_COLOR
|
|
#define MAX3421E_HOST_CONFIG_INFO_COLOR 0
|
|
#endif
|
|
|
|
// <o> MAX3421E_HOST_CONFIG_DEBUG_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef MAX3421E_HOST_CONFIG_DEBUG_COLOR
|
|
#define MAX3421E_HOST_CONFIG_DEBUG_COLOR 0
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// <e> NRFX_USBD_CONFIG_LOG_ENABLED - Enable logging in the module
|
|
//==========================================================
|
|
#ifndef NRFX_USBD_CONFIG_LOG_ENABLED
|
|
#define NRFX_USBD_CONFIG_LOG_ENABLED 0
|
|
#endif
|
|
// <o> NRFX_USBD_CONFIG_LOG_LEVEL - Default Severity level
|
|
|
|
// <0=> Off
|
|
// <1=> Error
|
|
// <2=> Warning
|
|
// <3=> Info
|
|
// <4=> Debug
|
|
|
|
#ifndef NRFX_USBD_CONFIG_LOG_LEVEL
|
|
#define NRFX_USBD_CONFIG_LOG_LEVEL 3
|
|
#endif
|
|
|
|
// <o> NRFX_USBD_CONFIG_INFO_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef NRFX_USBD_CONFIG_INFO_COLOR
|
|
#define NRFX_USBD_CONFIG_INFO_COLOR 0
|
|
#endif
|
|
|
|
// <o> NRFX_USBD_CONFIG_DEBUG_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef NRFX_USBD_CONFIG_DEBUG_COLOR
|
|
#define NRFX_USBD_CONFIG_DEBUG_COLOR 0
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// <e> PDM_CONFIG_LOG_ENABLED - Enables logging in the module.
|
|
//==========================================================
|
|
#ifndef PDM_CONFIG_LOG_ENABLED
|
|
#define PDM_CONFIG_LOG_ENABLED 0
|
|
#endif
|
|
// <o> PDM_CONFIG_LOG_LEVEL - Default Severity level
|
|
|
|
// <0=> Off
|
|
// <1=> Error
|
|
// <2=> Warning
|
|
// <3=> Info
|
|
// <4=> Debug
|
|
|
|
#ifndef PDM_CONFIG_LOG_LEVEL
|
|
#define PDM_CONFIG_LOG_LEVEL 3
|
|
#endif
|
|
|
|
// <o> PDM_CONFIG_INFO_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef PDM_CONFIG_INFO_COLOR
|
|
#define PDM_CONFIG_INFO_COLOR 0
|
|
#endif
|
|
|
|
// <o> PDM_CONFIG_DEBUG_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef PDM_CONFIG_DEBUG_COLOR
|
|
#define PDM_CONFIG_DEBUG_COLOR 0
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// <e> PPI_CONFIG_LOG_ENABLED - Enables logging in the module.
|
|
//==========================================================
|
|
#ifndef PPI_CONFIG_LOG_ENABLED
|
|
#define PPI_CONFIG_LOG_ENABLED 0
|
|
#endif
|
|
// <o> PPI_CONFIG_LOG_LEVEL - Default Severity level
|
|
|
|
// <0=> Off
|
|
// <1=> Error
|
|
// <2=> Warning
|
|
// <3=> Info
|
|
// <4=> Debug
|
|
|
|
#ifndef PPI_CONFIG_LOG_LEVEL
|
|
#define PPI_CONFIG_LOG_LEVEL 3
|
|
#endif
|
|
|
|
// <o> PPI_CONFIG_INFO_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef PPI_CONFIG_INFO_COLOR
|
|
#define PPI_CONFIG_INFO_COLOR 0
|
|
#endif
|
|
|
|
// <o> PPI_CONFIG_DEBUG_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef PPI_CONFIG_DEBUG_COLOR
|
|
#define PPI_CONFIG_DEBUG_COLOR 0
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// <e> PWM_CONFIG_LOG_ENABLED - Enables logging in the module.
|
|
//==========================================================
|
|
#ifndef PWM_CONFIG_LOG_ENABLED
|
|
#define PWM_CONFIG_LOG_ENABLED 0
|
|
#endif
|
|
// <o> PWM_CONFIG_LOG_LEVEL - Default Severity level
|
|
|
|
// <0=> Off
|
|
// <1=> Error
|
|
// <2=> Warning
|
|
// <3=> Info
|
|
// <4=> Debug
|
|
|
|
#ifndef PWM_CONFIG_LOG_LEVEL
|
|
#define PWM_CONFIG_LOG_LEVEL 3
|
|
#endif
|
|
|
|
// <o> PWM_CONFIG_INFO_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef PWM_CONFIG_INFO_COLOR
|
|
#define PWM_CONFIG_INFO_COLOR 0
|
|
#endif
|
|
|
|
// <o> PWM_CONFIG_DEBUG_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef PWM_CONFIG_DEBUG_COLOR
|
|
#define PWM_CONFIG_DEBUG_COLOR 0
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// <e> QDEC_CONFIG_LOG_ENABLED - Enables logging in the module.
|
|
//==========================================================
|
|
#ifndef QDEC_CONFIG_LOG_ENABLED
|
|
#define QDEC_CONFIG_LOG_ENABLED 0
|
|
#endif
|
|
// <o> QDEC_CONFIG_LOG_LEVEL - Default Severity level
|
|
|
|
// <0=> Off
|
|
// <1=> Error
|
|
// <2=> Warning
|
|
// <3=> Info
|
|
// <4=> Debug
|
|
|
|
#ifndef QDEC_CONFIG_LOG_LEVEL
|
|
#define QDEC_CONFIG_LOG_LEVEL 3
|
|
#endif
|
|
|
|
// <o> QDEC_CONFIG_INFO_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef QDEC_CONFIG_INFO_COLOR
|
|
#define QDEC_CONFIG_INFO_COLOR 0
|
|
#endif
|
|
|
|
// <o> QDEC_CONFIG_DEBUG_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef QDEC_CONFIG_DEBUG_COLOR
|
|
#define QDEC_CONFIG_DEBUG_COLOR 0
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// <e> RNG_CONFIG_LOG_ENABLED - Enables logging in the module.
|
|
//==========================================================
|
|
#ifndef RNG_CONFIG_LOG_ENABLED
|
|
#define RNG_CONFIG_LOG_ENABLED 0
|
|
#endif
|
|
// <o> RNG_CONFIG_LOG_LEVEL - Default Severity level
|
|
|
|
// <0=> Off
|
|
// <1=> Error
|
|
// <2=> Warning
|
|
// <3=> Info
|
|
// <4=> Debug
|
|
|
|
#ifndef RNG_CONFIG_LOG_LEVEL
|
|
#define RNG_CONFIG_LOG_LEVEL 3
|
|
#endif
|
|
|
|
// <o> RNG_CONFIG_INFO_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef RNG_CONFIG_INFO_COLOR
|
|
#define RNG_CONFIG_INFO_COLOR 0
|
|
#endif
|
|
|
|
// <o> RNG_CONFIG_DEBUG_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef RNG_CONFIG_DEBUG_COLOR
|
|
#define RNG_CONFIG_DEBUG_COLOR 0
|
|
#endif
|
|
|
|
// <q> RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED - Enables logging of random numbers.
|
|
|
|
#ifndef RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED
|
|
#define RNG_CONFIG_RANDOM_NUMBER_LOG_ENABLED 0
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// <e> RTC_CONFIG_LOG_ENABLED - Enables logging in the module.
|
|
//==========================================================
|
|
#ifndef RTC_CONFIG_LOG_ENABLED
|
|
#define RTC_CONFIG_LOG_ENABLED 0
|
|
#endif
|
|
// <o> RTC_CONFIG_LOG_LEVEL - Default Severity level
|
|
|
|
// <0=> Off
|
|
// <1=> Error
|
|
// <2=> Warning
|
|
// <3=> Info
|
|
// <4=> Debug
|
|
|
|
#ifndef RTC_CONFIG_LOG_LEVEL
|
|
#define RTC_CONFIG_LOG_LEVEL 3
|
|
#endif
|
|
|
|
// <o> RTC_CONFIG_INFO_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef RTC_CONFIG_INFO_COLOR
|
|
#define RTC_CONFIG_INFO_COLOR 0
|
|
#endif
|
|
|
|
// <o> RTC_CONFIG_DEBUG_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef RTC_CONFIG_DEBUG_COLOR
|
|
#define RTC_CONFIG_DEBUG_COLOR 0
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// <e> SAADC_CONFIG_LOG_ENABLED - Enables logging in the module.
|
|
//==========================================================
|
|
#ifndef SAADC_CONFIG_LOG_ENABLED
|
|
#define SAADC_CONFIG_LOG_ENABLED 0
|
|
#endif
|
|
// <o> SAADC_CONFIG_LOG_LEVEL - Default Severity level
|
|
|
|
// <0=> Off
|
|
// <1=> Error
|
|
// <2=> Warning
|
|
// <3=> Info
|
|
// <4=> Debug
|
|
|
|
#ifndef SAADC_CONFIG_LOG_LEVEL
|
|
#define SAADC_CONFIG_LOG_LEVEL 3
|
|
#endif
|
|
|
|
// <o> SAADC_CONFIG_INFO_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef SAADC_CONFIG_INFO_COLOR
|
|
#define SAADC_CONFIG_INFO_COLOR 0
|
|
#endif
|
|
|
|
// <o> SAADC_CONFIG_DEBUG_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef SAADC_CONFIG_DEBUG_COLOR
|
|
#define SAADC_CONFIG_DEBUG_COLOR 0
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// <e> SPIS_CONFIG_LOG_ENABLED - Enables logging in the module.
|
|
//==========================================================
|
|
#ifndef SPIS_CONFIG_LOG_ENABLED
|
|
#define SPIS_CONFIG_LOG_ENABLED 0
|
|
#endif
|
|
// <o> SPIS_CONFIG_LOG_LEVEL - Default Severity level
|
|
|
|
// <0=> Off
|
|
// <1=> Error
|
|
// <2=> Warning
|
|
// <3=> Info
|
|
// <4=> Debug
|
|
|
|
#ifndef SPIS_CONFIG_LOG_LEVEL
|
|
#define SPIS_CONFIG_LOG_LEVEL 3
|
|
#endif
|
|
|
|
// <o> SPIS_CONFIG_INFO_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef SPIS_CONFIG_INFO_COLOR
|
|
#define SPIS_CONFIG_INFO_COLOR 0
|
|
#endif
|
|
|
|
// <o> SPIS_CONFIG_DEBUG_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef SPIS_CONFIG_DEBUG_COLOR
|
|
#define SPIS_CONFIG_DEBUG_COLOR 0
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// <e> SPI_CONFIG_LOG_ENABLED - Enables logging in the module.
|
|
//==========================================================
|
|
#ifndef SPI_CONFIG_LOG_ENABLED
|
|
#define SPI_CONFIG_LOG_ENABLED 0
|
|
#endif
|
|
// <o> SPI_CONFIG_LOG_LEVEL - Default Severity level
|
|
|
|
// <0=> Off
|
|
// <1=> Error
|
|
// <2=> Warning
|
|
// <3=> Info
|
|
// <4=> Debug
|
|
|
|
#ifndef SPI_CONFIG_LOG_LEVEL
|
|
#define SPI_CONFIG_LOG_LEVEL 3
|
|
#endif
|
|
|
|
// <o> SPI_CONFIG_INFO_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef SPI_CONFIG_INFO_COLOR
|
|
#define SPI_CONFIG_INFO_COLOR 0
|
|
#endif
|
|
|
|
// <o> SPI_CONFIG_DEBUG_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef SPI_CONFIG_DEBUG_COLOR
|
|
#define SPI_CONFIG_DEBUG_COLOR 0
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// <e> TIMER_CONFIG_LOG_ENABLED - Enables logging in the module.
|
|
//==========================================================
|
|
#ifndef TIMER_CONFIG_LOG_ENABLED
|
|
#define TIMER_CONFIG_LOG_ENABLED 0
|
|
#endif
|
|
// <o> TIMER_CONFIG_LOG_LEVEL - Default Severity level
|
|
|
|
// <0=> Off
|
|
// <1=> Error
|
|
// <2=> Warning
|
|
// <3=> Info
|
|
// <4=> Debug
|
|
|
|
#ifndef TIMER_CONFIG_LOG_LEVEL
|
|
#define TIMER_CONFIG_LOG_LEVEL 3
|
|
#endif
|
|
|
|
// <o> TIMER_CONFIG_INFO_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef TIMER_CONFIG_INFO_COLOR
|
|
#define TIMER_CONFIG_INFO_COLOR 0
|
|
#endif
|
|
|
|
// <o> TIMER_CONFIG_DEBUG_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef TIMER_CONFIG_DEBUG_COLOR
|
|
#define TIMER_CONFIG_DEBUG_COLOR 0
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// <e> TWIS_CONFIG_LOG_ENABLED - Enables logging in the module.
|
|
//==========================================================
|
|
#ifndef TWIS_CONFIG_LOG_ENABLED
|
|
#define TWIS_CONFIG_LOG_ENABLED 0
|
|
#endif
|
|
// <o> TWIS_CONFIG_LOG_LEVEL - Default Severity level
|
|
|
|
// <0=> Off
|
|
// <1=> Error
|
|
// <2=> Warning
|
|
// <3=> Info
|
|
// <4=> Debug
|
|
|
|
#ifndef TWIS_CONFIG_LOG_LEVEL
|
|
#define TWIS_CONFIG_LOG_LEVEL 3
|
|
#endif
|
|
|
|
// <o> TWIS_CONFIG_INFO_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef TWIS_CONFIG_INFO_COLOR
|
|
#define TWIS_CONFIG_INFO_COLOR 0
|
|
#endif
|
|
|
|
// <o> TWIS_CONFIG_DEBUG_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef TWIS_CONFIG_DEBUG_COLOR
|
|
#define TWIS_CONFIG_DEBUG_COLOR 0
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// <e> TWI_CONFIG_LOG_ENABLED - Enables logging in the module.
|
|
//==========================================================
|
|
#ifndef TWI_CONFIG_LOG_ENABLED
|
|
#define TWI_CONFIG_LOG_ENABLED 0
|
|
#endif
|
|
// <o> TWI_CONFIG_LOG_LEVEL - Default Severity level
|
|
|
|
// <0=> Off
|
|
// <1=> Error
|
|
// <2=> Warning
|
|
// <3=> Info
|
|
// <4=> Debug
|
|
|
|
#ifndef TWI_CONFIG_LOG_LEVEL
|
|
#define TWI_CONFIG_LOG_LEVEL 3
|
|
#endif
|
|
|
|
// <o> TWI_CONFIG_INFO_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef TWI_CONFIG_INFO_COLOR
|
|
#define TWI_CONFIG_INFO_COLOR 0
|
|
#endif
|
|
|
|
// <o> TWI_CONFIG_DEBUG_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef TWI_CONFIG_DEBUG_COLOR
|
|
#define TWI_CONFIG_DEBUG_COLOR 0
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// <e> UART_CONFIG_LOG_ENABLED - Enables logging in the module.
|
|
//==========================================================
|
|
#ifndef UART_CONFIG_LOG_ENABLED
|
|
#define UART_CONFIG_LOG_ENABLED 0
|
|
#endif
|
|
// <o> UART_CONFIG_LOG_LEVEL - Default Severity level
|
|
|
|
// <0=> Off
|
|
// <1=> Error
|
|
// <2=> Warning
|
|
// <3=> Info
|
|
// <4=> Debug
|
|
|
|
#ifndef UART_CONFIG_LOG_LEVEL
|
|
#define UART_CONFIG_LOG_LEVEL 3
|
|
#endif
|
|
|
|
// <o> UART_CONFIG_INFO_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef UART_CONFIG_INFO_COLOR
|
|
#define UART_CONFIG_INFO_COLOR 0
|
|
#endif
|
|
|
|
// <o> UART_CONFIG_DEBUG_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef UART_CONFIG_DEBUG_COLOR
|
|
#define UART_CONFIG_DEBUG_COLOR 0
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// <e> USBD_CONFIG_LOG_ENABLED - Enable logging in the module
|
|
//==========================================================
|
|
#ifndef USBD_CONFIG_LOG_ENABLED
|
|
#define USBD_CONFIG_LOG_ENABLED 0
|
|
#endif
|
|
// <o> USBD_CONFIG_LOG_LEVEL - Default Severity level
|
|
|
|
// <0=> Off
|
|
// <1=> Error
|
|
// <2=> Warning
|
|
// <3=> Info
|
|
// <4=> Debug
|
|
|
|
#ifndef USBD_CONFIG_LOG_LEVEL
|
|
#define USBD_CONFIG_LOG_LEVEL 3
|
|
#endif
|
|
|
|
// <o> USBD_CONFIG_INFO_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef USBD_CONFIG_INFO_COLOR
|
|
#define USBD_CONFIG_INFO_COLOR 0
|
|
#endif
|
|
|
|
// <o> USBD_CONFIG_DEBUG_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef USBD_CONFIG_DEBUG_COLOR
|
|
#define USBD_CONFIG_DEBUG_COLOR 0
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// <e> WDT_CONFIG_LOG_ENABLED - Enables logging in the module.
|
|
//==========================================================
|
|
#ifndef WDT_CONFIG_LOG_ENABLED
|
|
#define WDT_CONFIG_LOG_ENABLED 0
|
|
#endif
|
|
// <o> WDT_CONFIG_LOG_LEVEL - Default Severity level
|
|
|
|
// <0=> Off
|
|
// <1=> Error
|
|
// <2=> Warning
|
|
// <3=> Info
|
|
// <4=> Debug
|
|
|
|
#ifndef WDT_CONFIG_LOG_LEVEL
|
|
#define WDT_CONFIG_LOG_LEVEL 3
|
|
#endif
|
|
|
|
// <o> WDT_CONFIG_INFO_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef WDT_CONFIG_INFO_COLOR
|
|
#define WDT_CONFIG_INFO_COLOR 0
|
|
#endif
|
|
|
|
// <o> WDT_CONFIG_DEBUG_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef WDT_CONFIG_DEBUG_COLOR
|
|
#define WDT_CONFIG_DEBUG_COLOR 0
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// </h>
|
|
//==========================================================
|
|
|
|
// <h> nrf_log in nRF_Libraries
|
|
|
|
//==========================================================
|
|
// <e> APP_TIMER_CONFIG_LOG_ENABLED - Enables logging in the module.
|
|
//==========================================================
|
|
#ifndef APP_TIMER_CONFIG_LOG_ENABLED
|
|
#define APP_TIMER_CONFIG_LOG_ENABLED 0
|
|
#endif
|
|
// <o> APP_TIMER_CONFIG_LOG_LEVEL - Default Severity level
|
|
|
|
// <0=> Off
|
|
// <1=> Error
|
|
// <2=> Warning
|
|
// <3=> Info
|
|
// <4=> Debug
|
|
|
|
#ifndef APP_TIMER_CONFIG_LOG_LEVEL
|
|
#define APP_TIMER_CONFIG_LOG_LEVEL 3
|
|
#endif
|
|
|
|
// <o> APP_TIMER_CONFIG_INITIAL_LOG_LEVEL - Initial severity level if dynamic filtering is enabled.
|
|
|
|
// <i> If module generates a lot of logs, initial log level can
|
|
// <i> be decreased to prevent flooding. Severity level can be
|
|
// <i> increased on instance basis.
|
|
// <0=> Off
|
|
// <1=> Error
|
|
// <2=> Warning
|
|
// <3=> Info
|
|
// <4=> Debug
|
|
|
|
#ifndef APP_TIMER_CONFIG_INITIAL_LOG_LEVEL
|
|
#define APP_TIMER_CONFIG_INITIAL_LOG_LEVEL 3
|
|
#endif
|
|
|
|
// <o> APP_TIMER_CONFIG_INFO_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef APP_TIMER_CONFIG_INFO_COLOR
|
|
#define APP_TIMER_CONFIG_INFO_COLOR 0
|
|
#endif
|
|
|
|
// <o> APP_TIMER_CONFIG_DEBUG_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef APP_TIMER_CONFIG_DEBUG_COLOR
|
|
#define APP_TIMER_CONFIG_DEBUG_COLOR 0
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// <e> APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED - Enables logging in the module.
|
|
//==========================================================
|
|
#ifndef APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED
|
|
#define APP_USBD_CDC_ACM_CONFIG_LOG_ENABLED 0
|
|
#endif
|
|
// <o> APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL - Default Severity level
|
|
|
|
// <0=> Off
|
|
// <1=> Error
|
|
// <2=> Warning
|
|
// <3=> Info
|
|
// <4=> Debug
|
|
|
|
#ifndef APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL
|
|
#define APP_USBD_CDC_ACM_CONFIG_LOG_LEVEL 3
|
|
#endif
|
|
|
|
// <o> APP_USBD_CDC_ACM_CONFIG_INFO_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef APP_USBD_CDC_ACM_CONFIG_INFO_COLOR
|
|
#define APP_USBD_CDC_ACM_CONFIG_INFO_COLOR 0
|
|
#endif
|
|
|
|
// <o> APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR
|
|
#define APP_USBD_CDC_ACM_CONFIG_DEBUG_COLOR 0
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// <e> APP_USBD_CONFIG_LOG_ENABLED - Enable logging in the module.
|
|
//==========================================================
|
|
#ifndef APP_USBD_CONFIG_LOG_ENABLED
|
|
#define APP_USBD_CONFIG_LOG_ENABLED 0
|
|
#endif
|
|
// <o> APP_USBD_CONFIG_LOG_LEVEL - Default Severity level
|
|
|
|
// <0=> Off
|
|
// <1=> Error
|
|
// <2=> Warning
|
|
// <3=> Info
|
|
// <4=> Debug
|
|
|
|
#ifndef APP_USBD_CONFIG_LOG_LEVEL
|
|
#define APP_USBD_CONFIG_LOG_LEVEL 3
|
|
#endif
|
|
|
|
// <o> APP_USBD_CONFIG_INFO_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef APP_USBD_CONFIG_INFO_COLOR
|
|
#define APP_USBD_CONFIG_INFO_COLOR 0
|
|
#endif
|
|
|
|
// <o> APP_USBD_CONFIG_DEBUG_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef APP_USBD_CONFIG_DEBUG_COLOR
|
|
#define APP_USBD_CONFIG_DEBUG_COLOR 0
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// <e> APP_USBD_DUMMY_CONFIG_LOG_ENABLED - Enables logging in the module.
|
|
//==========================================================
|
|
#ifndef APP_USBD_DUMMY_CONFIG_LOG_ENABLED
|
|
#define APP_USBD_DUMMY_CONFIG_LOG_ENABLED 0
|
|
#endif
|
|
// <o> APP_USBD_DUMMY_CONFIG_LOG_LEVEL - Default Severity level
|
|
|
|
// <0=> Off
|
|
// <1=> Error
|
|
// <2=> Warning
|
|
// <3=> Info
|
|
// <4=> Debug
|
|
|
|
#ifndef APP_USBD_DUMMY_CONFIG_LOG_LEVEL
|
|
#define APP_USBD_DUMMY_CONFIG_LOG_LEVEL 3
|
|
#endif
|
|
|
|
// <o> APP_USBD_DUMMY_CONFIG_INFO_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef APP_USBD_DUMMY_CONFIG_INFO_COLOR
|
|
#define APP_USBD_DUMMY_CONFIG_INFO_COLOR 0
|
|
#endif
|
|
|
|
// <o> APP_USBD_DUMMY_CONFIG_DEBUG_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef APP_USBD_DUMMY_CONFIG_DEBUG_COLOR
|
|
#define APP_USBD_DUMMY_CONFIG_DEBUG_COLOR 0
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// <e> APP_USBD_MSC_CONFIG_LOG_ENABLED - Enables logging in the module.
|
|
//==========================================================
|
|
#ifndef APP_USBD_MSC_CONFIG_LOG_ENABLED
|
|
#define APP_USBD_MSC_CONFIG_LOG_ENABLED 0
|
|
#endif
|
|
// <o> APP_USBD_MSC_CONFIG_LOG_LEVEL - Default Severity level
|
|
|
|
// <0=> Off
|
|
// <1=> Error
|
|
// <2=> Warning
|
|
// <3=> Info
|
|
// <4=> Debug
|
|
|
|
#ifndef APP_USBD_MSC_CONFIG_LOG_LEVEL
|
|
#define APP_USBD_MSC_CONFIG_LOG_LEVEL 3
|
|
#endif
|
|
|
|
// <o> APP_USBD_MSC_CONFIG_INFO_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef APP_USBD_MSC_CONFIG_INFO_COLOR
|
|
#define APP_USBD_MSC_CONFIG_INFO_COLOR 0
|
|
#endif
|
|
|
|
// <o> APP_USBD_MSC_CONFIG_DEBUG_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef APP_USBD_MSC_CONFIG_DEBUG_COLOR
|
|
#define APP_USBD_MSC_CONFIG_DEBUG_COLOR 0
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// <e> APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED - Enables logging in the module.
|
|
//==========================================================
|
|
#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED
|
|
#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_ENABLED 0
|
|
#endif
|
|
// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL - Default Severity level
|
|
|
|
// <0=> Off
|
|
// <1=> Error
|
|
// <2=> Warning
|
|
// <3=> Info
|
|
// <4=> Debug
|
|
|
|
#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL
|
|
#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_LOG_LEVEL 3
|
|
#endif
|
|
|
|
// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR
|
|
#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_INFO_COLOR 0
|
|
#endif
|
|
|
|
// <o> APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR
|
|
#define APP_USBD_NRF_DFU_TRIGGER_CONFIG_DEBUG_COLOR 0
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// <e> NRF_ATFIFO_CONFIG_LOG_ENABLED - Enables logging in the module.
|
|
//==========================================================
|
|
#ifndef NRF_ATFIFO_CONFIG_LOG_ENABLED
|
|
#define NRF_ATFIFO_CONFIG_LOG_ENABLED 0
|
|
#endif
|
|
// <o> NRF_ATFIFO_CONFIG_LOG_LEVEL - Default Severity level
|
|
|
|
// <0=> Off
|
|
// <1=> Error
|
|
// <2=> Warning
|
|
// <3=> Info
|
|
// <4=> Debug
|
|
|
|
#ifndef NRF_ATFIFO_CONFIG_LOG_LEVEL
|
|
#define NRF_ATFIFO_CONFIG_LOG_LEVEL 3
|
|
#endif
|
|
|
|
// <o> NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL - Initial severity level if dynamic filtering is enabled
|
|
|
|
// <0=> Off
|
|
// <1=> Error
|
|
// <2=> Warning
|
|
// <3=> Info
|
|
// <4=> Debug
|
|
|
|
#ifndef NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL
|
|
#define NRF_ATFIFO_CONFIG_LOG_INIT_FILTER_LEVEL 3
|
|
#endif
|
|
|
|
// <o> NRF_ATFIFO_CONFIG_INFO_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef NRF_ATFIFO_CONFIG_INFO_COLOR
|
|
#define NRF_ATFIFO_CONFIG_INFO_COLOR 0
|
|
#endif
|
|
|
|
// <o> NRF_ATFIFO_CONFIG_DEBUG_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef NRF_ATFIFO_CONFIG_DEBUG_COLOR
|
|
#define NRF_ATFIFO_CONFIG_DEBUG_COLOR 0
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// <e> NRF_BALLOC_CONFIG_LOG_ENABLED - Enables logging in the module.
|
|
//==========================================================
|
|
#ifndef NRF_BALLOC_CONFIG_LOG_ENABLED
|
|
#define NRF_BALLOC_CONFIG_LOG_ENABLED 0
|
|
#endif
|
|
// <o> NRF_BALLOC_CONFIG_LOG_LEVEL - Default Severity level
|
|
|
|
// <0=> Off
|
|
// <1=> Error
|
|
// <2=> Warning
|
|
// <3=> Info
|
|
// <4=> Debug
|
|
|
|
#ifndef NRF_BALLOC_CONFIG_LOG_LEVEL
|
|
#define NRF_BALLOC_CONFIG_LOG_LEVEL 3
|
|
#endif
|
|
|
|
// <o> NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL - Initial severity level if dynamic filtering is enabled.
|
|
|
|
// <i> If module generates a lot of logs, initial log level can
|
|
// <i> be decreased to prevent flooding. Severity level can be
|
|
// <i> increased on instance basis.
|
|
// <0=> Off
|
|
// <1=> Error
|
|
// <2=> Warning
|
|
// <3=> Info
|
|
// <4=> Debug
|
|
|
|
#ifndef NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL
|
|
#define NRF_BALLOC_CONFIG_INITIAL_LOG_LEVEL 3
|
|
#endif
|
|
|
|
// <o> NRF_BALLOC_CONFIG_INFO_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef NRF_BALLOC_CONFIG_INFO_COLOR
|
|
#define NRF_BALLOC_CONFIG_INFO_COLOR 0
|
|
#endif
|
|
|
|
// <o> NRF_BALLOC_CONFIG_DEBUG_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef NRF_BALLOC_CONFIG_DEBUG_COLOR
|
|
#define NRF_BALLOC_CONFIG_DEBUG_COLOR 0
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// <e> NRF_BLOCK_DEV_EMPTY_CONFIG_LOG_ENABLED - Enables logging in the module.
|
|
//==========================================================
|
|
#ifndef NRF_BLOCK_DEV_EMPTY_CONFIG_LOG_ENABLED
|
|
#define NRF_BLOCK_DEV_EMPTY_CONFIG_LOG_ENABLED 0
|
|
#endif
|
|
// <o> NRF_BLOCK_DEV_EMPTY_CONFIG_LOG_LEVEL - Default Severity level
|
|
|
|
// <0=> Off
|
|
// <1=> Error
|
|
// <2=> Warning
|
|
// <3=> Info
|
|
// <4=> Debug
|
|
|
|
#ifndef NRF_BLOCK_DEV_EMPTY_CONFIG_LOG_LEVEL
|
|
#define NRF_BLOCK_DEV_EMPTY_CONFIG_LOG_LEVEL 3
|
|
#endif
|
|
|
|
// <o> NRF_BLOCK_DEV_EMPTY_CONFIG_LOG_INIT_FILTER_LEVEL - Initial severity level if dynamic filtering is enabled
|
|
|
|
// <0=> Off
|
|
// <1=> Error
|
|
// <2=> Warning
|
|
// <3=> Info
|
|
// <4=> Debug
|
|
|
|
#ifndef NRF_BLOCK_DEV_EMPTY_CONFIG_LOG_INIT_FILTER_LEVEL
|
|
#define NRF_BLOCK_DEV_EMPTY_CONFIG_LOG_INIT_FILTER_LEVEL 3
|
|
#endif
|
|
|
|
// <o> NRF_BLOCK_DEV_EMPTY_CONFIG_INFO_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef NRF_BLOCK_DEV_EMPTY_CONFIG_INFO_COLOR
|
|
#define NRF_BLOCK_DEV_EMPTY_CONFIG_INFO_COLOR 0
|
|
#endif
|
|
|
|
// <o> NRF_BLOCK_DEV_EMPTY_CONFIG_DEBUG_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef NRF_BLOCK_DEV_EMPTY_CONFIG_DEBUG_COLOR
|
|
#define NRF_BLOCK_DEV_EMPTY_CONFIG_DEBUG_COLOR 0
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// <e> NRF_BLOCK_DEV_QSPI_CONFIG_LOG_ENABLED - Enables logging in the module.
|
|
//==========================================================
|
|
#ifndef NRF_BLOCK_DEV_QSPI_CONFIG_LOG_ENABLED
|
|
#define NRF_BLOCK_DEV_QSPI_CONFIG_LOG_ENABLED 0
|
|
#endif
|
|
// <o> NRF_BLOCK_DEV_QSPI_CONFIG_LOG_LEVEL - Default Severity level
|
|
|
|
// <0=> Off
|
|
// <1=> Error
|
|
// <2=> Warning
|
|
// <3=> Info
|
|
// <4=> Debug
|
|
|
|
#ifndef NRF_BLOCK_DEV_QSPI_CONFIG_LOG_LEVEL
|
|
#define NRF_BLOCK_DEV_QSPI_CONFIG_LOG_LEVEL 3
|
|
#endif
|
|
|
|
// <o> NRF_BLOCK_DEV_QSPI_CONFIG_LOG_INIT_FILTER_LEVEL - Initial severity level if dynamic filtering is enabled
|
|
|
|
// <0=> Off
|
|
// <1=> Error
|
|
// <2=> Warning
|
|
// <3=> Info
|
|
// <4=> Debug
|
|
|
|
#ifndef NRF_BLOCK_DEV_QSPI_CONFIG_LOG_INIT_FILTER_LEVEL
|
|
#define NRF_BLOCK_DEV_QSPI_CONFIG_LOG_INIT_FILTER_LEVEL 3
|
|
#endif
|
|
|
|
// <o> NRF_BLOCK_DEV_QSPI_CONFIG_INFO_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef NRF_BLOCK_DEV_QSPI_CONFIG_INFO_COLOR
|
|
#define NRF_BLOCK_DEV_QSPI_CONFIG_INFO_COLOR 0
|
|
#endif
|
|
|
|
// <o> NRF_BLOCK_DEV_QSPI_CONFIG_DEBUG_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef NRF_BLOCK_DEV_QSPI_CONFIG_DEBUG_COLOR
|
|
#define NRF_BLOCK_DEV_QSPI_CONFIG_DEBUG_COLOR 0
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// <e> NRF_BLOCK_DEV_RAM_CONFIG_LOG_ENABLED - Enables logging in the module.
|
|
//==========================================================
|
|
#ifndef NRF_BLOCK_DEV_RAM_CONFIG_LOG_ENABLED
|
|
#define NRF_BLOCK_DEV_RAM_CONFIG_LOG_ENABLED 0
|
|
#endif
|
|
// <o> NRF_BLOCK_DEV_RAM_CONFIG_LOG_LEVEL - Default Severity level
|
|
|
|
// <0=> Off
|
|
// <1=> Error
|
|
// <2=> Warning
|
|
// <3=> Info
|
|
// <4=> Debug
|
|
|
|
#ifndef NRF_BLOCK_DEV_RAM_CONFIG_LOG_LEVEL
|
|
#define NRF_BLOCK_DEV_RAM_CONFIG_LOG_LEVEL 3
|
|
#endif
|
|
|
|
// <o> NRF_BLOCK_DEV_RAM_CONFIG_LOG_INIT_FILTER_LEVEL - Initial severity level if dynamic filtering is enabled
|
|
|
|
// <0=> Off
|
|
// <1=> Error
|
|
// <2=> Warning
|
|
// <3=> Info
|
|
// <4=> Debug
|
|
|
|
#ifndef NRF_BLOCK_DEV_RAM_CONFIG_LOG_INIT_FILTER_LEVEL
|
|
#define NRF_BLOCK_DEV_RAM_CONFIG_LOG_INIT_FILTER_LEVEL 3
|
|
#endif
|
|
|
|
// <o> NRF_BLOCK_DEV_RAM_CONFIG_INFO_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef NRF_BLOCK_DEV_RAM_CONFIG_INFO_COLOR
|
|
#define NRF_BLOCK_DEV_RAM_CONFIG_INFO_COLOR 0
|
|
#endif
|
|
|
|
// <o> NRF_BLOCK_DEV_RAM_CONFIG_DEBUG_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef NRF_BLOCK_DEV_RAM_CONFIG_DEBUG_COLOR
|
|
#define NRF_BLOCK_DEV_RAM_CONFIG_DEBUG_COLOR 0
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// <e> NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
|
|
//==========================================================
|
|
#ifndef NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED
|
|
#define NRF_CLI_BLE_UART_CONFIG_LOG_ENABLED 0
|
|
#endif
|
|
// <o> NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL - Default Severity level
|
|
|
|
// <0=> Off
|
|
// <1=> Error
|
|
// <2=> Warning
|
|
// <3=> Info
|
|
// <4=> Debug
|
|
|
|
#ifndef NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL
|
|
#define NRF_CLI_BLE_UART_CONFIG_LOG_LEVEL 3
|
|
#endif
|
|
|
|
// <o> NRF_CLI_BLE_UART_CONFIG_INFO_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef NRF_CLI_BLE_UART_CONFIG_INFO_COLOR
|
|
#define NRF_CLI_BLE_UART_CONFIG_INFO_COLOR 0
|
|
#endif
|
|
|
|
// <o> NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR
|
|
#define NRF_CLI_BLE_UART_CONFIG_DEBUG_COLOR 0
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// <e> NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
|
|
//==========================================================
|
|
#ifndef NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED
|
|
#define NRF_CLI_LIBUARTE_CONFIG_LOG_ENABLED 0
|
|
#endif
|
|
// <o> NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL - Default Severity level
|
|
|
|
// <0=> Off
|
|
// <1=> Error
|
|
// <2=> Warning
|
|
// <3=> Info
|
|
// <4=> Debug
|
|
|
|
#ifndef NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL
|
|
#define NRF_CLI_LIBUARTE_CONFIG_LOG_LEVEL 3
|
|
#endif
|
|
|
|
// <o> NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR
|
|
#define NRF_CLI_LIBUARTE_CONFIG_INFO_COLOR 0
|
|
#endif
|
|
|
|
// <o> NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR
|
|
#define NRF_CLI_LIBUARTE_CONFIG_DEBUG_COLOR 0
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// <e> NRF_CLI_UART_CONFIG_LOG_ENABLED - Enables logging in the module.
|
|
//==========================================================
|
|
#ifndef NRF_CLI_UART_CONFIG_LOG_ENABLED
|
|
#define NRF_CLI_UART_CONFIG_LOG_ENABLED 0
|
|
#endif
|
|
// <o> NRF_CLI_UART_CONFIG_LOG_LEVEL - Default Severity level
|
|
|
|
// <0=> Off
|
|
// <1=> Error
|
|
// <2=> Warning
|
|
// <3=> Info
|
|
// <4=> Debug
|
|
|
|
#ifndef NRF_CLI_UART_CONFIG_LOG_LEVEL
|
|
#define NRF_CLI_UART_CONFIG_LOG_LEVEL 3
|
|
#endif
|
|
|
|
// <o> NRF_CLI_UART_CONFIG_INFO_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef NRF_CLI_UART_CONFIG_INFO_COLOR
|
|
#define NRF_CLI_UART_CONFIG_INFO_COLOR 0
|
|
#endif
|
|
|
|
// <o> NRF_CLI_UART_CONFIG_DEBUG_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef NRF_CLI_UART_CONFIG_DEBUG_COLOR
|
|
#define NRF_CLI_UART_CONFIG_DEBUG_COLOR 0
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// <e> NRF_LIBUARTE_CONFIG_LOG_ENABLED - Enables logging in the module.
|
|
//==========================================================
|
|
#ifndef NRF_LIBUARTE_CONFIG_LOG_ENABLED
|
|
#define NRF_LIBUARTE_CONFIG_LOG_ENABLED 0
|
|
#endif
|
|
// <o> NRF_LIBUARTE_CONFIG_LOG_LEVEL - Default Severity level
|
|
|
|
// <0=> Off
|
|
// <1=> Error
|
|
// <2=> Warning
|
|
// <3=> Info
|
|
// <4=> Debug
|
|
|
|
#ifndef NRF_LIBUARTE_CONFIG_LOG_LEVEL
|
|
#define NRF_LIBUARTE_CONFIG_LOG_LEVEL 3
|
|
#endif
|
|
|
|
// <o> NRF_LIBUARTE_CONFIG_INFO_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef NRF_LIBUARTE_CONFIG_INFO_COLOR
|
|
#define NRF_LIBUARTE_CONFIG_INFO_COLOR 0
|
|
#endif
|
|
|
|
// <o> NRF_LIBUARTE_CONFIG_DEBUG_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef NRF_LIBUARTE_CONFIG_DEBUG_COLOR
|
|
#define NRF_LIBUARTE_CONFIG_DEBUG_COLOR 0
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// <e> NRF_MEMOBJ_CONFIG_LOG_ENABLED - Enables logging in the module.
|
|
//==========================================================
|
|
#ifndef NRF_MEMOBJ_CONFIG_LOG_ENABLED
|
|
#define NRF_MEMOBJ_CONFIG_LOG_ENABLED 0
|
|
#endif
|
|
// <o> NRF_MEMOBJ_CONFIG_LOG_LEVEL - Default Severity level
|
|
|
|
// <0=> Off
|
|
// <1=> Error
|
|
// <2=> Warning
|
|
// <3=> Info
|
|
// <4=> Debug
|
|
|
|
#ifndef NRF_MEMOBJ_CONFIG_LOG_LEVEL
|
|
#define NRF_MEMOBJ_CONFIG_LOG_LEVEL 3
|
|
#endif
|
|
|
|
// <o> NRF_MEMOBJ_CONFIG_INFO_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef NRF_MEMOBJ_CONFIG_INFO_COLOR
|
|
#define NRF_MEMOBJ_CONFIG_INFO_COLOR 0
|
|
#endif
|
|
|
|
// <o> NRF_MEMOBJ_CONFIG_DEBUG_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef NRF_MEMOBJ_CONFIG_DEBUG_COLOR
|
|
#define NRF_MEMOBJ_CONFIG_DEBUG_COLOR 0
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// <e> NRF_PWR_MGMT_CONFIG_LOG_ENABLED - Enables logging in the module.
|
|
//==========================================================
|
|
#ifndef NRF_PWR_MGMT_CONFIG_LOG_ENABLED
|
|
#define NRF_PWR_MGMT_CONFIG_LOG_ENABLED 0
|
|
#endif
|
|
// <o> NRF_PWR_MGMT_CONFIG_LOG_LEVEL - Default Severity level
|
|
|
|
// <0=> Off
|
|
// <1=> Error
|
|
// <2=> Warning
|
|
// <3=> Info
|
|
// <4=> Debug
|
|
|
|
#ifndef NRF_PWR_MGMT_CONFIG_LOG_LEVEL
|
|
#define NRF_PWR_MGMT_CONFIG_LOG_LEVEL 3
|
|
#endif
|
|
|
|
// <o> NRF_PWR_MGMT_CONFIG_INFO_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef NRF_PWR_MGMT_CONFIG_INFO_COLOR
|
|
#define NRF_PWR_MGMT_CONFIG_INFO_COLOR 0
|
|
#endif
|
|
|
|
// <o> NRF_PWR_MGMT_CONFIG_DEBUG_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef NRF_PWR_MGMT_CONFIG_DEBUG_COLOR
|
|
#define NRF_PWR_MGMT_CONFIG_DEBUG_COLOR 0
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// <e> NRF_QUEUE_CONFIG_LOG_ENABLED - Enables logging in the module.
|
|
//==========================================================
|
|
#ifndef NRF_QUEUE_CONFIG_LOG_ENABLED
|
|
#define NRF_QUEUE_CONFIG_LOG_ENABLED 0
|
|
#endif
|
|
// <o> NRF_QUEUE_CONFIG_LOG_LEVEL - Default Severity level
|
|
|
|
// <0=> Off
|
|
// <1=> Error
|
|
// <2=> Warning
|
|
// <3=> Info
|
|
// <4=> Debug
|
|
|
|
#ifndef NRF_QUEUE_CONFIG_LOG_LEVEL
|
|
#define NRF_QUEUE_CONFIG_LOG_LEVEL 3
|
|
#endif
|
|
|
|
// <o> NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL - Initial severity level if dynamic filtering is enabled
|
|
|
|
// <0=> Off
|
|
// <1=> Error
|
|
// <2=> Warning
|
|
// <3=> Info
|
|
// <4=> Debug
|
|
|
|
#ifndef NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL
|
|
#define NRF_QUEUE_CONFIG_LOG_INIT_FILTER_LEVEL 3
|
|
#endif
|
|
|
|
// <o> NRF_QUEUE_CONFIG_INFO_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef NRF_QUEUE_CONFIG_INFO_COLOR
|
|
#define NRF_QUEUE_CONFIG_INFO_COLOR 0
|
|
#endif
|
|
|
|
// <o> NRF_QUEUE_CONFIG_DEBUG_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef NRF_QUEUE_CONFIG_DEBUG_COLOR
|
|
#define NRF_QUEUE_CONFIG_DEBUG_COLOR 0
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// <e> NRF_SDH_ANT_LOG_ENABLED - Enable logging in SoftDevice handler (ANT) module.
|
|
//==========================================================
|
|
#ifndef NRF_SDH_ANT_LOG_ENABLED
|
|
#define NRF_SDH_ANT_LOG_ENABLED 0
|
|
#endif
|
|
// <o> NRF_SDH_ANT_LOG_LEVEL - Default Severity level
|
|
|
|
// <0=> Off
|
|
// <1=> Error
|
|
// <2=> Warning
|
|
// <3=> Info
|
|
// <4=> Debug
|
|
|
|
#ifndef NRF_SDH_ANT_LOG_LEVEL
|
|
#define NRF_SDH_ANT_LOG_LEVEL 3
|
|
#endif
|
|
|
|
// <o> NRF_SDH_ANT_INFO_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef NRF_SDH_ANT_INFO_COLOR
|
|
#define NRF_SDH_ANT_INFO_COLOR 0
|
|
#endif
|
|
|
|
// <o> NRF_SDH_ANT_DEBUG_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef NRF_SDH_ANT_DEBUG_COLOR
|
|
#define NRF_SDH_ANT_DEBUG_COLOR 0
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// <e> NRF_SDH_BLE_LOG_ENABLED - Enable logging in SoftDevice handler (BLE) module.
|
|
//==========================================================
|
|
#ifndef NRF_SDH_BLE_LOG_ENABLED
|
|
#define NRF_SDH_BLE_LOG_ENABLED 0
|
|
#endif
|
|
// <o> NRF_SDH_BLE_LOG_LEVEL - Default Severity level
|
|
|
|
// <0=> Off
|
|
// <1=> Error
|
|
// <2=> Warning
|
|
// <3=> Info
|
|
// <4=> Debug
|
|
|
|
#ifndef NRF_SDH_BLE_LOG_LEVEL
|
|
#define NRF_SDH_BLE_LOG_LEVEL 3
|
|
#endif
|
|
|
|
// <o> NRF_SDH_BLE_INFO_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef NRF_SDH_BLE_INFO_COLOR
|
|
#define NRF_SDH_BLE_INFO_COLOR 0
|
|
#endif
|
|
|
|
// <o> NRF_SDH_BLE_DEBUG_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef NRF_SDH_BLE_DEBUG_COLOR
|
|
#define NRF_SDH_BLE_DEBUG_COLOR 0
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// <e> NRF_SDH_LOG_ENABLED - Enable logging in SoftDevice handler module.
|
|
//==========================================================
|
|
#ifndef NRF_SDH_LOG_ENABLED
|
|
#define NRF_SDH_LOG_ENABLED 0
|
|
#endif
|
|
|
|
#ifndef NRF_SDH_FREERTOS_LOG_ENABLED
|
|
#define NRF_SDH_FREERTOS_LOG_ENABLED 0
|
|
#endif
|
|
|
|
#ifndef NRF_SDH_FREERTOS_LOG_LEVEL
|
|
#define NRF_SDH_FREERTOS_LOG_LEVEL 4
|
|
#endif
|
|
// <o> NRF_SDH_LOG_LEVEL - Default Severity level
|
|
|
|
// <0=> Off
|
|
// <1=> Error
|
|
// <2=> Warning
|
|
// <3=> Info
|
|
// <4=> Debug
|
|
|
|
#ifndef NRF_SDH_LOG_LEVEL
|
|
#define NRF_SDH_LOG_LEVEL 3
|
|
#endif
|
|
|
|
// <o> NRF_SDH_INFO_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef NRF_SDH_INFO_COLOR
|
|
#define NRF_SDH_INFO_COLOR 0
|
|
#endif
|
|
|
|
// <o> NRF_SDH_DEBUG_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef NRF_SDH_DEBUG_COLOR
|
|
#define NRF_SDH_DEBUG_COLOR 0
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// <e> NRF_SDH_SOC_LOG_ENABLED - Enable logging in SoftDevice handler (SoC) module.
|
|
//==========================================================
|
|
#ifndef NRF_SDH_SOC_LOG_ENABLED
|
|
#define NRF_SDH_SOC_LOG_ENABLED 0
|
|
#endif
|
|
// <o> NRF_SDH_SOC_LOG_LEVEL - Default Severity level
|
|
|
|
// <0=> Off
|
|
// <1=> Error
|
|
// <2=> Warning
|
|
// <3=> Info
|
|
// <4=> Debug
|
|
|
|
#ifndef NRF_SDH_SOC_LOG_LEVEL
|
|
#define NRF_SDH_SOC_LOG_LEVEL 3
|
|
#endif
|
|
|
|
// <o> NRF_SDH_SOC_INFO_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef NRF_SDH_SOC_INFO_COLOR
|
|
#define NRF_SDH_SOC_INFO_COLOR 0
|
|
#endif
|
|
|
|
// <o> NRF_SDH_SOC_DEBUG_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef NRF_SDH_SOC_DEBUG_COLOR
|
|
#define NRF_SDH_SOC_DEBUG_COLOR 0
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// <e> NRF_SORTLIST_CONFIG_LOG_ENABLED - Enables logging in the module.
|
|
//==========================================================
|
|
#ifndef NRF_SORTLIST_CONFIG_LOG_ENABLED
|
|
#define NRF_SORTLIST_CONFIG_LOG_ENABLED 0
|
|
#endif
|
|
// <o> NRF_SORTLIST_CONFIG_LOG_LEVEL - Default Severity level
|
|
|
|
// <0=> Off
|
|
// <1=> Error
|
|
// <2=> Warning
|
|
// <3=> Info
|
|
// <4=> Debug
|
|
|
|
#ifndef NRF_SORTLIST_CONFIG_LOG_LEVEL
|
|
#define NRF_SORTLIST_CONFIG_LOG_LEVEL 3
|
|
#endif
|
|
|
|
// <o> NRF_SORTLIST_CONFIG_INFO_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef NRF_SORTLIST_CONFIG_INFO_COLOR
|
|
#define NRF_SORTLIST_CONFIG_INFO_COLOR 0
|
|
#endif
|
|
|
|
// <o> NRF_SORTLIST_CONFIG_DEBUG_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef NRF_SORTLIST_CONFIG_DEBUG_COLOR
|
|
#define NRF_SORTLIST_CONFIG_DEBUG_COLOR 0
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// <e> NRF_TWI_SENSOR_CONFIG_LOG_ENABLED - Enables logging in the module.
|
|
//==========================================================
|
|
#ifndef NRF_TWI_SENSOR_CONFIG_LOG_ENABLED
|
|
#define NRF_TWI_SENSOR_CONFIG_LOG_ENABLED 0
|
|
#endif
|
|
// <o> NRF_TWI_SENSOR_CONFIG_LOG_LEVEL - Default Severity level
|
|
|
|
// <0=> Off
|
|
// <1=> Error
|
|
// <2=> Warning
|
|
// <3=> Info
|
|
// <4=> Debug
|
|
|
|
#ifndef NRF_TWI_SENSOR_CONFIG_LOG_LEVEL
|
|
#define NRF_TWI_SENSOR_CONFIG_LOG_LEVEL 3
|
|
#endif
|
|
|
|
// <o> NRF_TWI_SENSOR_CONFIG_INFO_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef NRF_TWI_SENSOR_CONFIG_INFO_COLOR
|
|
#define NRF_TWI_SENSOR_CONFIG_INFO_COLOR 0
|
|
#endif
|
|
|
|
// <o> NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR
|
|
#define NRF_TWI_SENSOR_CONFIG_DEBUG_COLOR 0
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// <e> PM_LOG_ENABLED - Enable logging in Peer Manager and its submodules.
|
|
//==========================================================
|
|
#ifndef PM_LOG_ENABLED
|
|
#define PM_LOG_ENABLED 0
|
|
#endif
|
|
// <o> PM_LOG_LEVEL - Default Severity level
|
|
|
|
// <0=> Off
|
|
// <1=> Error
|
|
// <2=> Warning
|
|
// <3=> Info
|
|
// <4=> Debug
|
|
|
|
#ifndef PM_LOG_LEVEL
|
|
#define PM_LOG_LEVEL 3
|
|
#endif
|
|
|
|
// <o> PM_LOG_INFO_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef PM_LOG_INFO_COLOR
|
|
#define PM_LOG_INFO_COLOR 0
|
|
#endif
|
|
|
|
// <o> PM_LOG_DEBUG_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef PM_LOG_DEBUG_COLOR
|
|
#define PM_LOG_DEBUG_COLOR 0
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// </h>
|
|
//==========================================================
|
|
|
|
// <h> nrf_log in nRF_Serialization
|
|
|
|
//==========================================================
|
|
// <e> SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED - Enables logging in the module.
|
|
//==========================================================
|
|
#ifndef SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED
|
|
#define SER_HAL_TRANSPORT_CONFIG_LOG_ENABLED 0
|
|
#endif
|
|
// <o> SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL - Default Severity level
|
|
|
|
// <0=> Off
|
|
// <1=> Error
|
|
// <2=> Warning
|
|
// <3=> Info
|
|
// <4=> Debug
|
|
|
|
#ifndef SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL
|
|
#define SER_HAL_TRANSPORT_CONFIG_LOG_LEVEL 3
|
|
#endif
|
|
|
|
// <o> SER_HAL_TRANSPORT_CONFIG_INFO_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef SER_HAL_TRANSPORT_CONFIG_INFO_COLOR
|
|
#define SER_HAL_TRANSPORT_CONFIG_INFO_COLOR 0
|
|
#endif
|
|
|
|
// <o> SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR
|
|
#define SER_HAL_TRANSPORT_CONFIG_DEBUG_COLOR 0
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// </h>
|
|
//==========================================================
|
|
|
|
// </h>
|
|
//==========================================================
|
|
|
|
// </e>
|
|
|
|
// <q> NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED - nrf_log_str_formatter - Log string formatter
|
|
|
|
#ifndef NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED
|
|
#define NRF_LOG_STR_FORMATTER_TIMESTAMP_FORMAT_ENABLED 1
|
|
#endif
|
|
|
|
// </h>
|
|
//==========================================================
|
|
|
|
// <h> nRF_NFC
|
|
|
|
//==========================================================
|
|
// <q> NFC_AC_REC_ENABLED - nfc_ac_rec - NFC NDEF Alternative Carrier record encoder
|
|
|
|
#ifndef NFC_AC_REC_ENABLED
|
|
#define NFC_AC_REC_ENABLED 0
|
|
#endif
|
|
|
|
// <q> NFC_AC_REC_PARSER_ENABLED - nfc_ac_rec_parser - Alternative Carrier record parser
|
|
|
|
#ifndef NFC_AC_REC_PARSER_ENABLED
|
|
#define NFC_AC_REC_PARSER_ENABLED 0
|
|
#endif
|
|
|
|
// <e> NFC_BLE_OOB_ADVDATA_ENABLED - nfc_ble_oob_advdata - AD data for OOB pairing encoder
|
|
//==========================================================
|
|
#ifndef NFC_BLE_OOB_ADVDATA_ENABLED
|
|
#define NFC_BLE_OOB_ADVDATA_ENABLED 0
|
|
#endif
|
|
// <o> ADVANCED_ADVDATA_SUPPORT - Non-mandatory AD types for BLE OOB pairing are encoded inside the NDEF message (e.g. service UUIDs)
|
|
|
|
// <1=> Enabled
|
|
// <0=> Disabled
|
|
|
|
#ifndef ADVANCED_ADVDATA_SUPPORT
|
|
#define ADVANCED_ADVDATA_SUPPORT 0
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// <q> NFC_BLE_OOB_ADVDATA_PARSER_ENABLED - nfc_ble_oob_advdata_parser - BLE OOB pairing AD data parser
|
|
|
|
#ifndef NFC_BLE_OOB_ADVDATA_PARSER_ENABLED
|
|
#define NFC_BLE_OOB_ADVDATA_PARSER_ENABLED 0
|
|
#endif
|
|
|
|
// <e> NFC_BLE_PAIR_LIB_ENABLED - nfc_ble_pair_lib - Library parameters
|
|
//==========================================================
|
|
#ifndef NFC_BLE_PAIR_LIB_ENABLED
|
|
#define NFC_BLE_PAIR_LIB_ENABLED 0
|
|
#endif
|
|
// <e> NFC_BLE_PAIR_LIB_LOG_ENABLED - Enables logging in the module.
|
|
//==========================================================
|
|
#ifndef NFC_BLE_PAIR_LIB_LOG_ENABLED
|
|
#define NFC_BLE_PAIR_LIB_LOG_ENABLED 0
|
|
#endif
|
|
// <o> NFC_BLE_PAIR_LIB_LOG_LEVEL - Default Severity level
|
|
|
|
// <0=> Off
|
|
// <1=> Error
|
|
// <2=> Warning
|
|
// <3=> Info
|
|
// <4=> Debug
|
|
|
|
#ifndef NFC_BLE_PAIR_LIB_LOG_LEVEL
|
|
#define NFC_BLE_PAIR_LIB_LOG_LEVEL 3
|
|
#endif
|
|
|
|
// <o> NFC_BLE_PAIR_LIB_INFO_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef NFC_BLE_PAIR_LIB_INFO_COLOR
|
|
#define NFC_BLE_PAIR_LIB_INFO_COLOR 0
|
|
#endif
|
|
|
|
// <o> NFC_BLE_PAIR_LIB_DEBUG_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef NFC_BLE_PAIR_LIB_DEBUG_COLOR
|
|
#define NFC_BLE_PAIR_LIB_DEBUG_COLOR 0
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// <h> NFC_BLE_PAIR_LIB_SECURITY_PARAMETERS - Common Peer Manager security parameters.
|
|
|
|
//==========================================================
|
|
// <e> BLE_NFC_SEC_PARAM_BOND - Enables device bonding.
|
|
|
|
// <i> If bonding is enabled at least one of the BLE_NFC_SEC_PARAM_KDIST options must be enabled.
|
|
//==========================================================
|
|
#ifndef BLE_NFC_SEC_PARAM_BOND
|
|
#define BLE_NFC_SEC_PARAM_BOND 1
|
|
#endif
|
|
// <q> BLE_NFC_SEC_PARAM_KDIST_OWN_ENC - Enables Long Term Key and Master Identification distribution by device.
|
|
|
|
#ifndef BLE_NFC_SEC_PARAM_KDIST_OWN_ENC
|
|
#define BLE_NFC_SEC_PARAM_KDIST_OWN_ENC 1
|
|
#endif
|
|
|
|
// <q> BLE_NFC_SEC_PARAM_KDIST_OWN_ID - Enables Identity Resolving Key and Identity Address Information distribution by device.
|
|
|
|
#ifndef BLE_NFC_SEC_PARAM_KDIST_OWN_ID
|
|
#define BLE_NFC_SEC_PARAM_KDIST_OWN_ID 1
|
|
#endif
|
|
|
|
// <q> BLE_NFC_SEC_PARAM_KDIST_PEER_ENC - Enables Long Term Key and Master Identification distribution by peer.
|
|
|
|
#ifndef BLE_NFC_SEC_PARAM_KDIST_PEER_ENC
|
|
#define BLE_NFC_SEC_PARAM_KDIST_PEER_ENC 1
|
|
#endif
|
|
|
|
// <q> BLE_NFC_SEC_PARAM_KDIST_PEER_ID - Enables Identity Resolving Key and Identity Address Information distribution by peer.
|
|
|
|
#ifndef BLE_NFC_SEC_PARAM_KDIST_PEER_ID
|
|
#define BLE_NFC_SEC_PARAM_KDIST_PEER_ID 1
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// <o> BLE_NFC_SEC_PARAM_MIN_KEY_SIZE - Minimal size of a security key.
|
|
|
|
// <7=> 7
|
|
// <8=> 8
|
|
// <9=> 9
|
|
// <10=> 10
|
|
// <11=> 11
|
|
// <12=> 12
|
|
// <13=> 13
|
|
// <14=> 14
|
|
// <15=> 15
|
|
// <16=> 16
|
|
|
|
#ifndef BLE_NFC_SEC_PARAM_MIN_KEY_SIZE
|
|
#define BLE_NFC_SEC_PARAM_MIN_KEY_SIZE 7
|
|
#endif
|
|
|
|
// <o> BLE_NFC_SEC_PARAM_MAX_KEY_SIZE - Maximal size of a security key.
|
|
|
|
// <7=> 7
|
|
// <8=> 8
|
|
// <9=> 9
|
|
// <10=> 10
|
|
// <11=> 11
|
|
// <12=> 12
|
|
// <13=> 13
|
|
// <14=> 14
|
|
// <15=> 15
|
|
// <16=> 16
|
|
|
|
#ifndef BLE_NFC_SEC_PARAM_MAX_KEY_SIZE
|
|
#define BLE_NFC_SEC_PARAM_MAX_KEY_SIZE 16
|
|
#endif
|
|
|
|
// </h>
|
|
//==========================================================
|
|
|
|
// </e>
|
|
|
|
// <q> NFC_BLE_PAIR_MSG_ENABLED - nfc_ble_pair_msg - NDEF message for OOB pairing encoder
|
|
|
|
#ifndef NFC_BLE_PAIR_MSG_ENABLED
|
|
#define NFC_BLE_PAIR_MSG_ENABLED 0
|
|
#endif
|
|
|
|
// <q> NFC_CH_COMMON_ENABLED - nfc_ble_pair_common - OOB pairing common data
|
|
|
|
#ifndef NFC_CH_COMMON_ENABLED
|
|
#define NFC_CH_COMMON_ENABLED 0
|
|
#endif
|
|
|
|
// <q> NFC_EP_OOB_REC_ENABLED - nfc_ep_oob_rec - EP record for BLE pairing encoder
|
|
|
|
#ifndef NFC_EP_OOB_REC_ENABLED
|
|
#define NFC_EP_OOB_REC_ENABLED 0
|
|
#endif
|
|
|
|
// <q> NFC_HS_REC_ENABLED - nfc_hs_rec - Handover Select NDEF record encoder
|
|
|
|
#ifndef NFC_HS_REC_ENABLED
|
|
#define NFC_HS_REC_ENABLED 0
|
|
#endif
|
|
|
|
// <q> NFC_LE_OOB_REC_ENABLED - nfc_le_oob_rec - LE record for BLE pairing encoder
|
|
|
|
#ifndef NFC_LE_OOB_REC_ENABLED
|
|
#define NFC_LE_OOB_REC_ENABLED 0
|
|
#endif
|
|
|
|
// <q> NFC_LE_OOB_REC_PARSER_ENABLED - nfc_le_oob_rec_parser - LE record parser
|
|
|
|
#ifndef NFC_LE_OOB_REC_PARSER_ENABLED
|
|
#define NFC_LE_OOB_REC_PARSER_ENABLED 0
|
|
#endif
|
|
|
|
// <q> NFC_NDEF_LAUNCHAPP_MSG_ENABLED - nfc_launchapp_msg - Encoding data for NDEF Application Launching message for NFC Tag
|
|
|
|
#ifndef NFC_NDEF_LAUNCHAPP_MSG_ENABLED
|
|
#define NFC_NDEF_LAUNCHAPP_MSG_ENABLED 0
|
|
#endif
|
|
|
|
// <q> NFC_NDEF_LAUNCHAPP_REC_ENABLED - nfc_launchapp_rec - Encoding data for NDEF Application Launching record for NFC Tag
|
|
|
|
#ifndef NFC_NDEF_LAUNCHAPP_REC_ENABLED
|
|
#define NFC_NDEF_LAUNCHAPP_REC_ENABLED 0
|
|
#endif
|
|
|
|
// <e> NFC_NDEF_MSG_ENABLED - nfc_ndef_msg - NFC NDEF Message generator module
|
|
//==========================================================
|
|
#ifndef NFC_NDEF_MSG_ENABLED
|
|
#define NFC_NDEF_MSG_ENABLED 0
|
|
#endif
|
|
// <o> NFC_NDEF_MSG_TAG_TYPE - NFC Tag Type
|
|
|
|
// <2=> Type 2 Tag
|
|
// <4=> Type 4 Tag
|
|
|
|
#ifndef NFC_NDEF_MSG_TAG_TYPE
|
|
#define NFC_NDEF_MSG_TAG_TYPE 2
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// <e> NFC_NDEF_MSG_PARSER_ENABLED - nfc_ndef_msg_parser - NFC NDEF message parser module
|
|
//==========================================================
|
|
#ifndef NFC_NDEF_MSG_PARSER_ENABLED
|
|
#define NFC_NDEF_MSG_PARSER_ENABLED 0
|
|
#endif
|
|
// <e> NFC_NDEF_MSG_PARSER_LOG_ENABLED - Enables logging in the module.
|
|
//==========================================================
|
|
#ifndef NFC_NDEF_MSG_PARSER_LOG_ENABLED
|
|
#define NFC_NDEF_MSG_PARSER_LOG_ENABLED 0
|
|
#endif
|
|
// <o> NFC_NDEF_MSG_PARSER_LOG_LEVEL - Default Severity level
|
|
|
|
// <0=> Off
|
|
// <1=> Error
|
|
// <2=> Warning
|
|
// <3=> Info
|
|
// <4=> Debug
|
|
|
|
#ifndef NFC_NDEF_MSG_PARSER_LOG_LEVEL
|
|
#define NFC_NDEF_MSG_PARSER_LOG_LEVEL 3
|
|
#endif
|
|
|
|
// <o> NFC_NDEF_MSG_PARSER_INFO_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef NFC_NDEF_MSG_PARSER_INFO_COLOR
|
|
#define NFC_NDEF_MSG_PARSER_INFO_COLOR 0
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// </e>
|
|
|
|
// <q> NFC_NDEF_RECORD_ENABLED - nfc_ndef_record - NFC NDEF Record generator module
|
|
|
|
#ifndef NFC_NDEF_RECORD_ENABLED
|
|
#define NFC_NDEF_RECORD_ENABLED 0
|
|
#endif
|
|
|
|
// <e> NFC_NDEF_RECORD_PARSER_ENABLED - nfc_ndef_record_parser - NFC NDEF Record parser module
|
|
//==========================================================
|
|
#ifndef NFC_NDEF_RECORD_PARSER_ENABLED
|
|
#define NFC_NDEF_RECORD_PARSER_ENABLED 0
|
|
#endif
|
|
// <e> NFC_NDEF_RECORD_PARSER_LOG_ENABLED - Enables logging in the module.
|
|
//==========================================================
|
|
#ifndef NFC_NDEF_RECORD_PARSER_LOG_ENABLED
|
|
#define NFC_NDEF_RECORD_PARSER_LOG_ENABLED 0
|
|
#endif
|
|
// <o> NFC_NDEF_RECORD_PARSER_LOG_LEVEL - Default Severity level
|
|
|
|
// <0=> Off
|
|
// <1=> Error
|
|
// <2=> Warning
|
|
// <3=> Info
|
|
// <4=> Debug
|
|
|
|
#ifndef NFC_NDEF_RECORD_PARSER_LOG_LEVEL
|
|
#define NFC_NDEF_RECORD_PARSER_LOG_LEVEL 3
|
|
#endif
|
|
|
|
// <o> NFC_NDEF_RECORD_PARSER_INFO_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef NFC_NDEF_RECORD_PARSER_INFO_COLOR
|
|
#define NFC_NDEF_RECORD_PARSER_INFO_COLOR 0
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// </e>
|
|
|
|
// <q> NFC_NDEF_TEXT_RECORD_ENABLED - nfc_text_rec - Encoding data for a text record for NFC Tag
|
|
|
|
#ifndef NFC_NDEF_TEXT_RECORD_ENABLED
|
|
#define NFC_NDEF_TEXT_RECORD_ENABLED 0
|
|
#endif
|
|
|
|
// <q> NFC_NDEF_URI_MSG_ENABLED - nfc_uri_msg - Encoding data for NDEF message with URI record for NFC Tag
|
|
|
|
#ifndef NFC_NDEF_URI_MSG_ENABLED
|
|
#define NFC_NDEF_URI_MSG_ENABLED 0
|
|
#endif
|
|
|
|
// <q> NFC_NDEF_URI_REC_ENABLED - nfc_uri_rec - Encoding data for a URI record for NFC Tag
|
|
|
|
#ifndef NFC_NDEF_URI_REC_ENABLED
|
|
#define NFC_NDEF_URI_REC_ENABLED 0
|
|
#endif
|
|
|
|
// <e> NFC_T2T_PARSER_ENABLED - nfc_type_2_tag_parser - Parser for decoding Type 2 Tag data
|
|
//==========================================================
|
|
#ifndef NFC_T2T_PARSER_ENABLED
|
|
#define NFC_T2T_PARSER_ENABLED 0
|
|
#endif
|
|
// <e> NFC_T2T_PARSER_LOG_ENABLED - Enables logging in the module.
|
|
//==========================================================
|
|
#ifndef NFC_T2T_PARSER_LOG_ENABLED
|
|
#define NFC_T2T_PARSER_LOG_ENABLED 0
|
|
#endif
|
|
// <o> NFC_T2T_PARSER_LOG_LEVEL - Default Severity level
|
|
|
|
// <0=> Off
|
|
// <1=> Error
|
|
// <2=> Warning
|
|
// <3=> Info
|
|
// <4=> Debug
|
|
|
|
#ifndef NFC_T2T_PARSER_LOG_LEVEL
|
|
#define NFC_T2T_PARSER_LOG_LEVEL 3
|
|
#endif
|
|
|
|
// <o> NFC_T2T_PARSER_INFO_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef NFC_T2T_PARSER_INFO_COLOR
|
|
#define NFC_T2T_PARSER_INFO_COLOR 0
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// </e>
|
|
|
|
// <e> NFC_T4T_APDU_ENABLED - nfc_t4t_apdu - APDU encoder/decoder for Type 4 Tag
|
|
//==========================================================
|
|
#ifndef NFC_T4T_APDU_ENABLED
|
|
#define NFC_T4T_APDU_ENABLED 0
|
|
#endif
|
|
// <e> NFC_T4T_APDU_LOG_ENABLED - Enables logging in the module.
|
|
//==========================================================
|
|
#ifndef NFC_T4T_APDU_LOG_ENABLED
|
|
#define NFC_T4T_APDU_LOG_ENABLED 0
|
|
#endif
|
|
// <o> NFC_T4T_APDU_LOG_LEVEL - Default Severity level
|
|
|
|
// <0=> Off
|
|
// <1=> Error
|
|
// <2=> Warning
|
|
// <3=> Info
|
|
// <4=> Debug
|
|
|
|
#ifndef NFC_T4T_APDU_LOG_LEVEL
|
|
#define NFC_T4T_APDU_LOG_LEVEL 3
|
|
#endif
|
|
|
|
// <o> NFC_T4T_APDU_LOG_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef NFC_T4T_APDU_LOG_COLOR
|
|
#define NFC_T4T_APDU_LOG_COLOR 0
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// </e>
|
|
|
|
// <e> NFC_T4T_CC_FILE_PARSER_ENABLED - nfc_t4t_cc_file - Capability Container file for Type 4 Tag
|
|
//==========================================================
|
|
#ifndef NFC_T4T_CC_FILE_PARSER_ENABLED
|
|
#define NFC_T4T_CC_FILE_PARSER_ENABLED 0
|
|
#endif
|
|
// <e> NFC_T4T_CC_FILE_PARSER_LOG_ENABLED - Enables logging in the module.
|
|
//==========================================================
|
|
#ifndef NFC_T4T_CC_FILE_PARSER_LOG_ENABLED
|
|
#define NFC_T4T_CC_FILE_PARSER_LOG_ENABLED 0
|
|
#endif
|
|
// <o> NFC_T4T_CC_FILE_PARSER_LOG_LEVEL - Default Severity level
|
|
|
|
// <0=> Off
|
|
// <1=> Error
|
|
// <2=> Warning
|
|
// <3=> Info
|
|
// <4=> Debug
|
|
|
|
#ifndef NFC_T4T_CC_FILE_PARSER_LOG_LEVEL
|
|
#define NFC_T4T_CC_FILE_PARSER_LOG_LEVEL 3
|
|
#endif
|
|
|
|
// <o> NFC_T4T_CC_FILE_PARSER_INFO_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef NFC_T4T_CC_FILE_PARSER_INFO_COLOR
|
|
#define NFC_T4T_CC_FILE_PARSER_INFO_COLOR 0
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// </e>
|
|
|
|
// <e> NFC_T4T_HL_DETECTION_PROCEDURES_ENABLED - nfc_t4t_hl_detection_procedures - NDEF Detection Procedure for Type 4 Tag
|
|
//==========================================================
|
|
#ifndef NFC_T4T_HL_DETECTION_PROCEDURES_ENABLED
|
|
#define NFC_T4T_HL_DETECTION_PROCEDURES_ENABLED 0
|
|
#endif
|
|
// <e> NFC_T4T_HL_DETECTION_PROCEDURES_LOG_ENABLED - Enables logging in the module.
|
|
//==========================================================
|
|
#ifndef NFC_T4T_HL_DETECTION_PROCEDURES_LOG_ENABLED
|
|
#define NFC_T4T_HL_DETECTION_PROCEDURES_LOG_ENABLED 0
|
|
#endif
|
|
// <o> NFC_T4T_HL_DETECTION_PROCEDURES_LOG_LEVEL - Default Severity level
|
|
|
|
// <0=> Off
|
|
// <1=> Error
|
|
// <2=> Warning
|
|
// <3=> Info
|
|
// <4=> Debug
|
|
|
|
#ifndef NFC_T4T_HL_DETECTION_PROCEDURES_LOG_LEVEL
|
|
#define NFC_T4T_HL_DETECTION_PROCEDURES_LOG_LEVEL 3
|
|
#endif
|
|
|
|
// <o> NFC_T4T_HL_DETECTION_PROCEDURES_INFO_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef NFC_T4T_HL_DETECTION_PROCEDURES_INFO_COLOR
|
|
#define NFC_T4T_HL_DETECTION_PROCEDURES_INFO_COLOR 0
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// <o> APDU_BUFF_SIZE - Size (in bytes) of the buffer for APDU storage
|
|
#ifndef APDU_BUFF_SIZE
|
|
#define APDU_BUFF_SIZE 250
|
|
#endif
|
|
|
|
// <o> CC_STORAGE_BUFF_SIZE - Size (in bytes) of the buffer for CC file storage
|
|
#ifndef CC_STORAGE_BUFF_SIZE
|
|
#define CC_STORAGE_BUFF_SIZE 64
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// <e> NFC_T4T_TLV_BLOCK_PARSER_ENABLED - nfc_t4t_tlv_block - TLV block for Type 4 Tag
|
|
//==========================================================
|
|
#ifndef NFC_T4T_TLV_BLOCK_PARSER_ENABLED
|
|
#define NFC_T4T_TLV_BLOCK_PARSER_ENABLED 0
|
|
#endif
|
|
// <e> NFC_T4T_TLV_BLOCK_PARSER_LOG_ENABLED - Enables logging in the module.
|
|
//==========================================================
|
|
#ifndef NFC_T4T_TLV_BLOCK_PARSER_LOG_ENABLED
|
|
#define NFC_T4T_TLV_BLOCK_PARSER_LOG_ENABLED 0
|
|
#endif
|
|
// <o> NFC_T4T_TLV_BLOCK_PARSER_LOG_LEVEL - Default Severity level
|
|
|
|
// <0=> Off
|
|
// <1=> Error
|
|
// <2=> Warning
|
|
// <3=> Info
|
|
// <4=> Debug
|
|
|
|
#ifndef NFC_T4T_TLV_BLOCK_PARSER_LOG_LEVEL
|
|
#define NFC_T4T_TLV_BLOCK_PARSER_LOG_LEVEL 3
|
|
#endif
|
|
|
|
// <o> NFC_T4T_TLV_BLOCK_PARSER_INFO_COLOR - ANSI escape code prefix.
|
|
|
|
// <0=> Default
|
|
// <1=> Black
|
|
// <2=> Red
|
|
// <3=> Green
|
|
// <4=> Yellow
|
|
// <5=> Blue
|
|
// <6=> Magenta
|
|
// <7=> Cyan
|
|
// <8=> White
|
|
|
|
#ifndef NFC_T4T_TLV_BLOCK_PARSER_INFO_COLOR
|
|
#define NFC_T4T_TLV_BLOCK_PARSER_INFO_COLOR 0
|
|
#endif
|
|
|
|
// </e>
|
|
|
|
// </e>
|
|
|
|
// </h>
|
|
//==========================================================
|
|
|
|
// <h> nRF_SoftDevice
|
|
|
|
//==========================================================
|
|
// <e> NRF_SDH_ANT_ENABLED - nrf_sdh_ant - SoftDevice ANT event handler
|
|
//==========================================================
|
|
#ifndef NRF_SDH_ANT_ENABLED
|
|
#define NRF_SDH_ANT_ENABLED 0
|
|
#endif
|
|
// <h> ANT Channels
|
|
|
|
//==========================================================
|
|
// <o> NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED - Allocated ANT channels.
|
|
#ifndef NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED
|
|
#define NRF_SDH_ANT_TOTAL_CHANNELS_ALLOCATED 0
|
|
#endif
|
|
|
|
// <o> NRF_SDH_ANT_ENCRYPTED_CHANNELS - Encrypted ANT channels.
|
|
#ifndef NRF_SDH_ANT_ENCRYPTED_CHANNELS
|
|
#define NRF_SDH_ANT_ENCRYPTED_CHANNELS 0
|
|
#endif
|
|
|
|
// </h>
|
|
//==========================================================
|
|
|
|
// <h> ANT Queues
|
|
|
|
//==========================================================
|
|
// <o> NRF_SDH_ANT_EVENT_QUEUE_SIZE - Event queue size.
|
|
#ifndef NRF_SDH_ANT_EVENT_QUEUE_SIZE
|
|
#define NRF_SDH_ANT_EVENT_QUEUE_SIZE 32
|
|
#endif
|
|
|
|
// <o> NRF_SDH_ANT_BURST_QUEUE_SIZE - ANT burst queue size.
|
|
#ifndef NRF_SDH_ANT_BURST_QUEUE_SIZE
|
|
#define NRF_SDH_ANT_BURST_QUEUE_SIZE 128
|
|
#endif
|
|
|
|
// </h>
|
|
//==========================================================
|
|
|
|
// <h> ANT Observers - Observers and priority levels
|
|
|
|
//==========================================================
|
|
// <o> NRF_SDH_ANT_OBSERVER_PRIO_LEVELS - Total number of priority levels for ANT observers.
|
|
// <i> This setting configures the number of priority levels available for the ANT event handlers.
|
|
// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
|
|
|
|
#ifndef NRF_SDH_ANT_OBSERVER_PRIO_LEVELS
|
|
#define NRF_SDH_ANT_OBSERVER_PRIO_LEVELS 2
|
|
#endif
|
|
|
|
// <h> ANT Observers priorities - Individual priorities
|
|
|
|
//==========================================================
|
|
// <o> ANT_BPWR_ANT_OBSERVER_PRIO
|
|
// <i> Priority with which ANT events are dispatched to the Bicycle Power Profile.
|
|
|
|
#ifndef ANT_BPWR_ANT_OBSERVER_PRIO
|
|
#define ANT_BPWR_ANT_OBSERVER_PRIO 1
|
|
#endif
|
|
|
|
// <o> ANT_BSC_ANT_OBSERVER_PRIO
|
|
// <i> Priority with which ANT events are dispatched to the Bicycle Speed and Cadence Profile.
|
|
|
|
#ifndef ANT_BSC_ANT_OBSERVER_PRIO
|
|
#define ANT_BSC_ANT_OBSERVER_PRIO 1
|
|
#endif
|
|
|
|
// <o> ANT_ENCRYPT_ANT_OBSERVER_PRIO
|
|
// <i> Priority with which ANT events are dispatched to the Cryptographic ANT stack configuration module.
|
|
|
|
#ifndef ANT_ENCRYPT_ANT_OBSERVER_PRIO
|
|
#define ANT_ENCRYPT_ANT_OBSERVER_PRIO 1
|
|
#endif
|
|
|
|
// <o> ANT_HRM_ANT_OBSERVER_PRIO
|
|
// <i> Priority with which ANT events are dispatched to the Heart Rate Monitor.
|
|
|
|
#ifndef ANT_HRM_ANT_OBSERVER_PRIO
|
|
#define ANT_HRM_ANT_OBSERVER_PRIO 1
|
|
#endif
|
|
|
|
// <o> ANT_SDM_ANT_OBSERVER_PRIO
|
|
// <i> Priority with which ANT events are dispatched to the Stride Based Speed and Distance Monitor Profile.
|
|
|
|
#ifndef ANT_SDM_ANT_OBSERVER_PRIO
|
|
#define ANT_SDM_ANT_OBSERVER_PRIO 1
|
|
#endif
|
|
|
|
// <o> ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO
|
|
// <i> Priority with which ANT events are dispatched to the ANT state indicator module.
|
|
|
|
#ifndef ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO
|
|
#define ANT_STATE_INDICATOR_ANT_OBSERVER_PRIO 1
|
|
#endif
|
|
|
|
// <o> BSP_BTN_ANT_OBSERVER_PRIO
|
|
// <i> Priority with which ANT events are dispatched to the Button Control module.
|
|
|
|
#ifndef BSP_BTN_ANT_OBSERVER_PRIO
|
|
#define BSP_BTN_ANT_OBSERVER_PRIO 1
|
|
#endif
|
|
|
|
// <o> NRF_DFU_ANT_EVT_HANDLER_PRIO - DFU ANT event handling priority.
|
|
// <i> Priority used to register the ANT event handler for DFU purposes. Change this if there is other ANT event handlers that should be
|
|
// higher priority.
|
|
|
|
#ifndef NRF_DFU_ANT_EVT_HANDLER_PRIO
|
|
#define NRF_DFU_ANT_EVT_HANDLER_PRIO 1
|
|
#endif
|
|
|
|
// </h>
|
|
//==========================================================
|
|
|
|
// </h>
|
|
//==========================================================
|
|
|
|
// </e>
|
|
|
|
// <e> NRF_SDH_BLE_ENABLED - nrf_sdh_ble - SoftDevice BLE event handler
|
|
//==========================================================
|
|
#ifndef NRF_SDH_BLE_ENABLED
|
|
#define NRF_SDH_BLE_ENABLED 1
|
|
#endif
|
|
// <h> BLE Stack configuration - Stack configuration parameters
|
|
|
|
// <i> The SoftDevice handler will configure the stack with these parameters when calling @ref nrf_sdh_ble_default_cfg_set.
|
|
// <i> Other libraries might depend on these values; keep them up-to-date even if you are not explicitly calling @ref
|
|
// nrf_sdh_ble_default_cfg_set.
|
|
//==========================================================
|
|
// <o> NRF_SDH_BLE_GAP_DATA_LENGTH <27-251>
|
|
|
|
// <i> Requested BLE GAP data length to be negotiated.
|
|
|
|
#ifndef NRF_SDH_BLE_GAP_DATA_LENGTH
|
|
#define NRF_SDH_BLE_GAP_DATA_LENGTH 27
|
|
#endif
|
|
|
|
// <o> NRF_SDH_BLE_PERIPHERAL_LINK_COUNT - Maximum number of peripheral links.
|
|
#ifndef NRF_SDH_BLE_PERIPHERAL_LINK_COUNT
|
|
#define NRF_SDH_BLE_PERIPHERAL_LINK_COUNT 1
|
|
#endif
|
|
|
|
// <o> NRF_SDH_BLE_CENTRAL_LINK_COUNT - Maximum number of central links.
|
|
#ifndef NRF_SDH_BLE_CENTRAL_LINK_COUNT
|
|
#define NRF_SDH_BLE_CENTRAL_LINK_COUNT 0
|
|
#endif
|
|
|
|
// <o> NRF_SDH_BLE_TOTAL_LINK_COUNT - Total link count.
|
|
// <i> Maximum number of total concurrent connections using the default configuration.
|
|
|
|
#ifndef NRF_SDH_BLE_TOTAL_LINK_COUNT
|
|
#define NRF_SDH_BLE_TOTAL_LINK_COUNT 1
|
|
#endif
|
|
|
|
// <o> NRF_SDH_BLE_GAP_EVENT_LENGTH - GAP event length.
|
|
// <i> The time set aside for this connection on every connection interval in 1.25 ms units.
|
|
|
|
#ifndef NRF_SDH_BLE_GAP_EVENT_LENGTH
|
|
#define NRF_SDH_BLE_GAP_EVENT_LENGTH 6
|
|
#endif
|
|
|
|
// <o> NRF_SDH_BLE_GATT_MAX_MTU_SIZE - Static maximum MTU size.
|
|
#ifndef NRF_SDH_BLE_GATT_MAX_MTU_SIZE
|
|
#define NRF_SDH_BLE_GATT_MAX_MTU_SIZE 23
|
|
#endif
|
|
|
|
// <o> NRF_SDH_BLE_GATTS_ATTR_TAB_SIZE - Attribute Table size in bytes. The size must be a multiple of 4.
|
|
#ifndef NRF_SDH_BLE_GATTS_ATTR_TAB_SIZE
|
|
#define NRF_SDH_BLE_GATTS_ATTR_TAB_SIZE 1408
|
|
#endif
|
|
|
|
// <o> NRF_SDH_BLE_VS_UUID_COUNT - The number of vendor-specific UUIDs.
|
|
#ifndef NRF_SDH_BLE_VS_UUID_COUNT
|
|
#define NRF_SDH_BLE_VS_UUID_COUNT 0
|
|
#endif
|
|
|
|
// <q> NRF_SDH_BLE_SERVICE_CHANGED - Include the Service Changed characteristic in the Attribute Table.
|
|
|
|
#ifndef NRF_SDH_BLE_SERVICE_CHANGED
|
|
#define NRF_SDH_BLE_SERVICE_CHANGED 1
|
|
#endif
|
|
|
|
// </h>
|
|
//==========================================================
|
|
|
|
// <h> BLE Observers - Observers and priority levels
|
|
|
|
//==========================================================
|
|
// <o> NRF_SDH_BLE_OBSERVER_PRIO_LEVELS - Total number of priority levels for BLE observers.
|
|
// <i> This setting configures the number of priority levels available for BLE event handlers.
|
|
// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
|
|
|
|
#ifndef NRF_SDH_BLE_OBSERVER_PRIO_LEVELS
|
|
#define NRF_SDH_BLE_OBSERVER_PRIO_LEVELS 4
|
|
#endif
|
|
|
|
// <h> BLE Observers priorities - Individual priorities
|
|
|
|
//==========================================================
|
|
// <o> BLE_ADV_BLE_OBSERVER_PRIO
|
|
// <i> Priority with which BLE events are dispatched to the Advertising module.
|
|
|
|
#ifndef BLE_ADV_BLE_OBSERVER_PRIO
|
|
#define BLE_ADV_BLE_OBSERVER_PRIO 1
|
|
#endif
|
|
|
|
// <o> BLE_ANCS_C_BLE_OBSERVER_PRIO
|
|
// <i> Priority with which BLE events are dispatched to the Apple Notification Service Client.
|
|
|
|
#ifndef BLE_ANCS_C_BLE_OBSERVER_PRIO
|
|
#define BLE_ANCS_C_BLE_OBSERVER_PRIO 2
|
|
#endif
|
|
|
|
// <o> BLE_ANS_C_BLE_OBSERVER_PRIO
|
|
// <i> Priority with which BLE events are dispatched to the Alert Notification Service Client.
|
|
|
|
#ifndef BLE_ANS_C_BLE_OBSERVER_PRIO
|
|
#define BLE_ANS_C_BLE_OBSERVER_PRIO 2
|
|
#endif
|
|
|
|
// <o> BLE_BAS_BLE_OBSERVER_PRIO
|
|
// <i> Priority with which BLE events are dispatched to the Battery Service.
|
|
|
|
#ifndef BLE_BAS_BLE_OBSERVER_PRIO
|
|
#define BLE_BAS_BLE_OBSERVER_PRIO 2
|
|
#endif
|
|
|
|
// <o> BLE_BAS_C_BLE_OBSERVER_PRIO
|
|
// <i> Priority with which BLE events are dispatched to the Battery Service Client.
|
|
|
|
#ifndef BLE_BAS_C_BLE_OBSERVER_PRIO
|
|
#define BLE_BAS_C_BLE_OBSERVER_PRIO 2
|
|
#endif
|
|
|
|
// <o> BLE_BPS_BLE_OBSERVER_PRIO
|
|
// <i> Priority with which BLE events are dispatched to the Blood Pressure Service.
|
|
|
|
#ifndef BLE_BPS_BLE_OBSERVER_PRIO
|
|
#define BLE_BPS_BLE_OBSERVER_PRIO 2
|
|
#endif
|
|
|
|
// <o> BLE_CONN_PARAMS_BLE_OBSERVER_PRIO
|
|
// <i> Priority with which BLE events are dispatched to the Connection parameters module.
|
|
|
|
#ifndef BLE_CONN_PARAMS_BLE_OBSERVER_PRIO
|
|
#define BLE_CONN_PARAMS_BLE_OBSERVER_PRIO 1
|
|
#endif
|
|
|
|
// <o> BLE_CONN_STATE_BLE_OBSERVER_PRIO
|
|
// <i> Priority with which BLE events are dispatched to the Connection State module.
|
|
|
|
#ifndef BLE_CONN_STATE_BLE_OBSERVER_PRIO
|
|
#define BLE_CONN_STATE_BLE_OBSERVER_PRIO 0
|
|
#endif
|
|
|
|
// <o> BLE_CSCS_BLE_OBSERVER_PRIO
|
|
// <i> Priority with which BLE events are dispatched to the Cycling Speed and Cadence Service.
|
|
|
|
#ifndef BLE_CSCS_BLE_OBSERVER_PRIO
|
|
#define BLE_CSCS_BLE_OBSERVER_PRIO 2
|
|
#endif
|
|
|
|
// <o> BLE_CTS_C_BLE_OBSERVER_PRIO
|
|
// <i> Priority with which BLE events are dispatched to the Current Time Service Client.
|
|
|
|
#ifndef BLE_CTS_C_BLE_OBSERVER_PRIO
|
|
#define BLE_CTS_C_BLE_OBSERVER_PRIO 2
|
|
#endif
|
|
|
|
// <o> BLE_DB_DISC_BLE_OBSERVER_PRIO
|
|
// <i> Priority with which BLE events are dispatched to the Database Discovery module.
|
|
|
|
#ifndef BLE_DB_DISC_BLE_OBSERVER_PRIO
|
|
#define BLE_DB_DISC_BLE_OBSERVER_PRIO 1
|
|
#endif
|
|
|
|
// <o> BLE_DFU_BLE_OBSERVER_PRIO
|
|
// <i> Priority with which BLE events are dispatched to the DFU Service.
|
|
|
|
#ifndef BLE_DFU_BLE_OBSERVER_PRIO
|
|
#define BLE_DFU_BLE_OBSERVER_PRIO 2
|
|
#endif
|
|
|
|
// <o> BLE_DIS_C_BLE_OBSERVER_PRIO
|
|
// <i> Priority with which BLE events are dispatched to the Device Information Client.
|
|
|
|
#ifndef BLE_DIS_C_BLE_OBSERVER_PRIO
|
|
#define BLE_DIS_C_BLE_OBSERVER_PRIO 2
|
|
#endif
|
|
|
|
// <o> BLE_GLS_BLE_OBSERVER_PRIO
|
|
// <i> Priority with which BLE events are dispatched to the Glucose Service.
|
|
|
|
#ifndef BLE_GLS_BLE_OBSERVER_PRIO
|
|
#define BLE_GLS_BLE_OBSERVER_PRIO 2
|
|
#endif
|
|
|
|
// <o> BLE_HIDS_BLE_OBSERVER_PRIO
|
|
// <i> Priority with which BLE events are dispatched to the Human Interface Device Service.
|
|
|
|
#ifndef BLE_HIDS_BLE_OBSERVER_PRIO
|
|
#define BLE_HIDS_BLE_OBSERVER_PRIO 2
|
|
#endif
|
|
|
|
// <o> BLE_HRS_BLE_OBSERVER_PRIO
|
|
// <i> Priority with which BLE events are dispatched to the Heart Rate Service.
|
|
|
|
#ifndef BLE_HRS_BLE_OBSERVER_PRIO
|
|
#define BLE_HRS_BLE_OBSERVER_PRIO 2
|
|
#endif
|
|
|
|
// <o> BLE_HRS_C_BLE_OBSERVER_PRIO
|
|
// <i> Priority with which BLE events are dispatched to the Heart Rate Service Client.
|
|
|
|
#ifndef BLE_HRS_C_BLE_OBSERVER_PRIO
|
|
#define BLE_HRS_C_BLE_OBSERVER_PRIO 2
|
|
#endif
|
|
|
|
// <o> BLE_HTS_BLE_OBSERVER_PRIO
|
|
// <i> Priority with which BLE events are dispatched to the Health Thermometer Service.
|
|
|
|
#ifndef BLE_HTS_BLE_OBSERVER_PRIO
|
|
#define BLE_HTS_BLE_OBSERVER_PRIO 2
|
|
#endif
|
|
|
|
// <o> BLE_IAS_BLE_OBSERVER_PRIO
|
|
// <i> Priority with which BLE events are dispatched to the Immediate Alert Service.
|
|
|
|
#ifndef BLE_IAS_BLE_OBSERVER_PRIO
|
|
#define BLE_IAS_BLE_OBSERVER_PRIO 2
|
|
#endif
|
|
|
|
// <o> BLE_IAS_C_BLE_OBSERVER_PRIO
|
|
// <i> Priority with which BLE events are dispatched to the Immediate Alert Service Client.
|
|
|
|
#ifndef BLE_IAS_C_BLE_OBSERVER_PRIO
|
|
#define BLE_IAS_C_BLE_OBSERVER_PRIO 2
|
|
#endif
|
|
|
|
// <o> BLE_LBS_BLE_OBSERVER_PRIO
|
|
// <i> Priority with which BLE events are dispatched to the LED Button Service.
|
|
|
|
#ifndef BLE_LBS_BLE_OBSERVER_PRIO
|
|
#define BLE_LBS_BLE_OBSERVER_PRIO 2
|
|
#endif
|
|
|
|
// <o> BLE_LBS_C_BLE_OBSERVER_PRIO
|
|
// <i> Priority with which BLE events are dispatched to the LED Button Service Client.
|
|
|
|
#ifndef BLE_LBS_C_BLE_OBSERVER_PRIO
|
|
#define BLE_LBS_C_BLE_OBSERVER_PRIO 2
|
|
#endif
|
|
|
|
// <o> BLE_LLS_BLE_OBSERVER_PRIO
|
|
// <i> Priority with which BLE events are dispatched to the Link Loss Service.
|
|
|
|
#ifndef BLE_LLS_BLE_OBSERVER_PRIO
|
|
#define BLE_LLS_BLE_OBSERVER_PRIO 2
|
|
#endif
|
|
|
|
// <o> BLE_LNS_BLE_OBSERVER_PRIO
|
|
// <i> Priority with which BLE events are dispatched to the Location Navigation Service.
|
|
|
|
#ifndef BLE_LNS_BLE_OBSERVER_PRIO
|
|
#define BLE_LNS_BLE_OBSERVER_PRIO 2
|
|
#endif
|
|
|
|
// <o> BLE_NUS_BLE_OBSERVER_PRIO
|
|
// <i> Priority with which BLE events are dispatched to the UART Service.
|
|
|
|
#ifndef BLE_NUS_BLE_OBSERVER_PRIO
|
|
#define BLE_NUS_BLE_OBSERVER_PRIO 2
|
|
#endif
|
|
|
|
// <o> BLE_NUS_C_BLE_OBSERVER_PRIO
|
|
// <i> Priority with which BLE events are dispatched to the UART Central Service.
|
|
|
|
#ifndef BLE_NUS_C_BLE_OBSERVER_PRIO
|
|
#define BLE_NUS_C_BLE_OBSERVER_PRIO 2
|
|
#endif
|
|
|
|
// <o> BLE_OTS_BLE_OBSERVER_PRIO
|
|
// <i> Priority with which BLE events are dispatched to the Object transfer service.
|
|
|
|
#ifndef BLE_OTS_BLE_OBSERVER_PRIO
|
|
#define BLE_OTS_BLE_OBSERVER_PRIO 2
|
|
#endif
|
|
|
|
// <o> BLE_OTS_C_BLE_OBSERVER_PRIO
|
|
// <i> Priority with which BLE events are dispatched to the Object transfer service client.
|
|
|
|
#ifndef BLE_OTS_C_BLE_OBSERVER_PRIO
|
|
#define BLE_OTS_C_BLE_OBSERVER_PRIO 2
|
|
#endif
|
|
|
|
// <o> BLE_RSCS_BLE_OBSERVER_PRIO
|
|
// <i> Priority with which BLE events are dispatched to the Running Speed and Cadence Service.
|
|
|
|
#ifndef BLE_RSCS_BLE_OBSERVER_PRIO
|
|
#define BLE_RSCS_BLE_OBSERVER_PRIO 2
|
|
#endif
|
|
|
|
// <o> BLE_RSCS_C_BLE_OBSERVER_PRIO
|
|
// <i> Priority with which BLE events are dispatched to the Running Speed and Cadence Client.
|
|
|
|
#ifndef BLE_RSCS_C_BLE_OBSERVER_PRIO
|
|
#define BLE_RSCS_C_BLE_OBSERVER_PRIO 2
|
|
#endif
|
|
|
|
// <o> BLE_TPS_BLE_OBSERVER_PRIO
|
|
// <i> Priority with which BLE events are dispatched to the TX Power Service.
|
|
|
|
#ifndef BLE_TPS_BLE_OBSERVER_PRIO
|
|
#define BLE_TPS_BLE_OBSERVER_PRIO 2
|
|
#endif
|
|
|
|
// <o> BSP_BTN_BLE_OBSERVER_PRIO
|
|
// <i> Priority with which BLE events are dispatched to the Button Control module.
|
|
|
|
#ifndef BSP_BTN_BLE_OBSERVER_PRIO
|
|
#define BSP_BTN_BLE_OBSERVER_PRIO 1
|
|
#endif
|
|
|
|
// <o> NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO
|
|
// <i> Priority with which BLE events are dispatched to the NFC pairing library.
|
|
|
|
#ifndef NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO
|
|
#define NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO 1
|
|
#endif
|
|
|
|
// <o> NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO
|
|
// <i> Priority with which BLE events are dispatched to the NFC pairing library.
|
|
|
|
#ifndef NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO
|
|
#define NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO 1
|
|
#endif
|
|
|
|
// <o> NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO
|
|
// <i> Priority with which BLE events are dispatched to the NFC pairing library.
|
|
|
|
#ifndef NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO
|
|
#define NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO 1
|
|
#endif
|
|
|
|
// <o> NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO
|
|
// <i> Priority with which BLE events are dispatched to the NFC pairing library.
|
|
|
|
#ifndef NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO
|
|
#define NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO 1
|
|
#endif
|
|
|
|
// <o> NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO
|
|
// <i> Priority with which BLE events are dispatched to the NFC pairing library.
|
|
|
|
#ifndef NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO
|
|
#define NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO 1
|
|
#endif
|
|
|
|
// <o> NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO
|
|
// <i> Priority with which BLE events are dispatched to the NFC pairing library.
|
|
|
|
#ifndef NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO
|
|
#define NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO 1
|
|
#endif
|
|
|
|
// <o> NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO
|
|
// <i> Priority with which BLE events are dispatched to the NFC pairing library.
|
|
|
|
#ifndef NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO
|
|
#define NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO 1
|
|
#endif
|
|
|
|
// <o> NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO
|
|
// <i> Priority with which BLE events are dispatched to the NFC pairing library.
|
|
|
|
#ifndef NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO
|
|
#define NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO 1
|
|
#endif
|
|
|
|
// <o> NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO
|
|
// <i> Priority with which BLE events are dispatched to the NFC pairing library.
|
|
|
|
#ifndef NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO
|
|
#define NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO 1
|
|
#endif
|
|
|
|
// <o> NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO
|
|
// <i> Priority with which BLE events are dispatched to the NFC pairing library.
|
|
|
|
#ifndef NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO
|
|
#define NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO 1
|
|
#endif
|
|
|
|
// <o> NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO
|
|
// <i> Priority with which BLE events are dispatched to the NFC pairing library.
|
|
|
|
#ifndef NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO
|
|
#define NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO 1
|
|
#endif
|
|
|
|
// <o> NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO
|
|
// <i> Priority with which BLE events are dispatched to the NFC pairing library.
|
|
|
|
#ifndef NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO
|
|
#define NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO 1
|
|
#endif
|
|
|
|
// <o> NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO
|
|
// <i> Priority with which BLE events are dispatched to the NFC pairing library.
|
|
|
|
#ifndef NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO
|
|
#define NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO 1
|
|
#endif
|
|
|
|
// <o> NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO
|
|
// <i> Priority with which BLE events are dispatched to the NFC pairing library.
|
|
|
|
#ifndef NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO
|
|
#define NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO 1
|
|
#endif
|
|
|
|
// <o> NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO
|
|
// <i> Priority with which BLE events are dispatched to the NFC pairing library.
|
|
|
|
#ifndef NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO
|
|
#define NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO 1
|
|
#endif
|
|
|
|
// <o> NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO
|
|
// <i> Priority with which BLE events are dispatched to the NFC pairing library.
|
|
|
|
#ifndef NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO
|
|
#define NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO 1
|
|
#endif
|
|
|
|
// <o> NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO
|
|
// <i> Priority with which BLE events are dispatched to the NFC pairing library.
|
|
|
|
#ifndef NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO
|
|
#define NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO 1
|
|
#endif
|
|
|
|
// <o> NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO
|
|
// <i> Priority with which BLE events are dispatched to the NFC pairing library.
|
|
|
|
#ifndef NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO
|
|
#define NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO 1
|
|
#endif
|
|
|
|
// <o> NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO
|
|
// <i> Priority with which BLE events are dispatched to the NFC pairing library.
|
|
|
|
#ifndef NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO
|
|
#define NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO 1
|
|
#endif
|
|
|
|
// <o> NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO
|
|
// <i> Priority with which BLE events are dispatched to the NFC pairing library.
|
|
|
|
#ifndef NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO
|
|
#define NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO 1
|
|
#endif
|
|
|
|
// <o> NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO
|
|
// <i> Priority with which BLE events are dispatched to the NFC pairing library.
|
|
|
|
#ifndef NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO
|
|
#define NFC_BLE_PAIR_LIB_BLE_OBSERVER_PRIO 1
|
|
#endif
|
|
|
|
// <o> NRF_BLE_BMS_BLE_OBSERVER_PRIO
|
|
// <i> Priority with which BLE events are dispatched to the Bond Management Service.
|
|
|
|
#ifndef NRF_BLE_BMS_BLE_OBSERVER_PRIO
|
|
#define NRF_BLE_BMS_BLE_OBSERVER_PRIO 2
|
|
#endif
|
|
|
|
// <o> NRF_BLE_CGMS_BLE_OBSERVER_PRIO
|
|
// <i> Priority with which BLE events are dispatched to the Contiuon Glucose Monitoring Service.
|
|
|
|
#ifndef NRF_BLE_CGMS_BLE_OBSERVER_PRIO
|
|
#define NRF_BLE_CGMS_BLE_OBSERVER_PRIO 2
|
|
#endif
|
|
|
|
// <o> NRF_BLE_ES_BLE_OBSERVER_PRIO
|
|
// <i> Priority with which BLE events are dispatched to the Eddystone module.
|
|
|
|
#ifndef NRF_BLE_ES_BLE_OBSERVER_PRIO
|
|
#define NRF_BLE_ES_BLE_OBSERVER_PRIO 2
|
|
#endif
|
|
|
|
// <o> NRF_BLE_GATTS_C_BLE_OBSERVER_PRIO
|
|
// <i> Priority with which BLE events are dispatched to the GATT Service Client.
|
|
|
|
#ifndef NRF_BLE_GATTS_C_BLE_OBSERVER_PRIO
|
|
#define NRF_BLE_GATTS_C_BLE_OBSERVER_PRIO 2
|
|
#endif
|
|
|
|
// <o> NRF_BLE_GATT_BLE_OBSERVER_PRIO
|
|
// <i> Priority with which BLE events are dispatched to the GATT module.
|
|
|
|
#ifndef NRF_BLE_GATT_BLE_OBSERVER_PRIO
|
|
#define NRF_BLE_GATT_BLE_OBSERVER_PRIO 1
|
|
#endif
|
|
|
|
// <o> NRF_BLE_QWR_BLE_OBSERVER_PRIO
|
|
// <i> Priority with which BLE events are dispatched to the Queued writes module.
|
|
|
|
#ifndef NRF_BLE_QWR_BLE_OBSERVER_PRIO
|
|
#define NRF_BLE_QWR_BLE_OBSERVER_PRIO 2
|
|
#endif
|
|
|
|
// <o> NRF_BLE_SCAN_OBSERVER_PRIO
|
|
// <i> Priority for dispatching the BLE events to the Scanning Module.
|
|
|
|
#ifndef NRF_BLE_SCAN_OBSERVER_PRIO
|
|
#define NRF_BLE_SCAN_OBSERVER_PRIO 1
|
|
#endif
|
|
|
|
// <o> PM_BLE_OBSERVER_PRIO - Priority with which BLE events are dispatched to the Peer Manager module.
|
|
#ifndef PM_BLE_OBSERVER_PRIO
|
|
#define PM_BLE_OBSERVER_PRIO 1
|
|
#endif
|
|
|
|
// </h>
|
|
//==========================================================
|
|
|
|
// </h>
|
|
//==========================================================
|
|
|
|
// </e>
|
|
|
|
// <e> NRF_SDH_ENABLED - nrf_sdh - SoftDevice handler
|
|
//==========================================================
|
|
#ifndef NRF_SDH_ENABLED
|
|
#define NRF_SDH_ENABLED 1
|
|
#endif
|
|
// <h> Dispatch model
|
|
|
|
// <i> This setting configures how Stack events are dispatched to the application.
|
|
//==========================================================
|
|
// <o> NRF_SDH_DISPATCH_MODEL
|
|
|
|
// <i> NRF_SDH_DISPATCH_MODEL_INTERRUPT: SoftDevice events are passed to the application from the interrupt context.
|
|
// <i> NRF_SDH_DISPATCH_MODEL_APPSH: SoftDevice events are scheduled using @ref app_scheduler.
|
|
// <i> NRF_SDH_DISPATCH_MODEL_POLLING: SoftDevice events are to be fetched manually.
|
|
// <0=> NRF_SDH_DISPATCH_MODEL_INTERRUPT
|
|
// <1=> NRF_SDH_DISPATCH_MODEL_APPSH
|
|
// <2=> NRF_SDH_DISPATCH_MODEL_POLLING
|
|
|
|
#ifndef NRF_SDH_DISPATCH_MODEL
|
|
#define NRF_SDH_DISPATCH_MODEL 2
|
|
#endif
|
|
|
|
// </h>
|
|
//==========================================================
|
|
|
|
// <h> Clock - SoftDevice clock configuration
|
|
|
|
//==========================================================
|
|
// <o> NRF_SDH_CLOCK_LF_SRC - SoftDevice clock source.
|
|
|
|
// <0=> NRF_CLOCK_LF_SRC_RC
|
|
// <1=> NRF_CLOCK_LF_SRC_XTAL
|
|
// <2=> NRF_CLOCK_LF_SRC_SYNTH
|
|
|
|
#ifndef NRF_SDH_CLOCK_LF_SRC
|
|
#define NRF_SDH_CLOCK_LF_SRC 1
|
|
#endif
|
|
|
|
// <o> NRF_SDH_CLOCK_LF_RC_CTIV - SoftDevice calibration timer interval.
|
|
#ifndef NRF_SDH_CLOCK_LF_RC_CTIV
|
|
#define NRF_SDH_CLOCK_LF_RC_CTIV 0
|
|
#endif
|
|
|
|
// <o> NRF_SDH_CLOCK_LF_RC_TEMP_CTIV - SoftDevice calibration timer interval under constant temperature.
|
|
// <i> How often (in number of calibration intervals) the RC oscillator shall be calibrated
|
|
// <i> if the temperature has not changed.
|
|
|
|
#ifndef NRF_SDH_CLOCK_LF_RC_TEMP_CTIV
|
|
#define NRF_SDH_CLOCK_LF_RC_TEMP_CTIV 0
|
|
#endif
|
|
|
|
// <o> NRF_SDH_CLOCK_LF_ACCURACY - External clock accuracy used in the LL to compute timing.
|
|
|
|
// <0=> NRF_CLOCK_LF_ACCURACY_250_PPM
|
|
// <1=> NRF_CLOCK_LF_ACCURACY_500_PPM
|
|
// <2=> NRF_CLOCK_LF_ACCURACY_150_PPM
|
|
// <3=> NRF_CLOCK_LF_ACCURACY_100_PPM
|
|
// <4=> NRF_CLOCK_LF_ACCURACY_75_PPM
|
|
// <5=> NRF_CLOCK_LF_ACCURACY_50_PPM
|
|
// <6=> NRF_CLOCK_LF_ACCURACY_30_PPM
|
|
// <7=> NRF_CLOCK_LF_ACCURACY_20_PPM
|
|
// <8=> NRF_CLOCK_LF_ACCURACY_10_PPM
|
|
// <9=> NRF_CLOCK_LF_ACCURACY_5_PPM
|
|
// <10=> NRF_CLOCK_LF_ACCURACY_2_PPM
|
|
// <11=> NRF_CLOCK_LF_ACCURACY_1_PPM
|
|
|
|
#ifndef NRF_SDH_CLOCK_LF_ACCURACY
|
|
#define NRF_SDH_CLOCK_LF_ACCURACY 7
|
|
#endif
|
|
|
|
// </h>
|
|
//==========================================================
|
|
|
|
// <h> SDH Observers - Observers and priority levels
|
|
|
|
//==========================================================
|
|
// <o> NRF_SDH_REQ_OBSERVER_PRIO_LEVELS - Total number of priority levels for request observers.
|
|
// <i> This setting configures the number of priority levels available for the SoftDevice request event handlers.
|
|
// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
|
|
|
|
#ifndef NRF_SDH_REQ_OBSERVER_PRIO_LEVELS
|
|
#define NRF_SDH_REQ_OBSERVER_PRIO_LEVELS 2
|
|
#endif
|
|
|
|
// <o> NRF_SDH_STATE_OBSERVER_PRIO_LEVELS - Total number of priority levels for state observers.
|
|
// <i> This setting configures the number of priority levels available for the SoftDevice state event handlers.
|
|
// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
|
|
|
|
#ifndef NRF_SDH_STATE_OBSERVER_PRIO_LEVELS
|
|
#define NRF_SDH_STATE_OBSERVER_PRIO_LEVELS 2
|
|
#endif
|
|
|
|
// <o> NRF_SDH_STACK_OBSERVER_PRIO_LEVELS - Total number of priority levels for stack event observers.
|
|
// <i> This setting configures the number of priority levels available for the SoftDevice stack event handlers (ANT, BLE, SoC).
|
|
// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
|
|
|
|
#ifndef NRF_SDH_STACK_OBSERVER_PRIO_LEVELS
|
|
#define NRF_SDH_STACK_OBSERVER_PRIO_LEVELS 2
|
|
#endif
|
|
|
|
// <h> State Observers priorities - Individual priorities
|
|
|
|
//==========================================================
|
|
// <o> CLOCK_CONFIG_STATE_OBSERVER_PRIO
|
|
// <i> Priority with which state events are dispatched to the Clock driver.
|
|
|
|
#ifndef CLOCK_CONFIG_STATE_OBSERVER_PRIO
|
|
#define CLOCK_CONFIG_STATE_OBSERVER_PRIO 0
|
|
#endif
|
|
|
|
// <o> POWER_CONFIG_STATE_OBSERVER_PRIO
|
|
// <i> Priority with which state events are dispatched to the Power driver.
|
|
|
|
#ifndef POWER_CONFIG_STATE_OBSERVER_PRIO
|
|
#define POWER_CONFIG_STATE_OBSERVER_PRIO 0
|
|
#endif
|
|
|
|
// <o> RNG_CONFIG_STATE_OBSERVER_PRIO
|
|
// <i> Priority with which state events are dispatched to this module.
|
|
|
|
#ifndef RNG_CONFIG_STATE_OBSERVER_PRIO
|
|
#define RNG_CONFIG_STATE_OBSERVER_PRIO 0
|
|
#endif
|
|
|
|
// </h>
|
|
//==========================================================
|
|
|
|
// <h> Stack Event Observers priorities - Individual priorities
|
|
|
|
//==========================================================
|
|
// <o> NRF_SDH_ANT_STACK_OBSERVER_PRIO
|
|
// <i> This setting configures the priority with which ANT events are processed with respect to other events coming from the stack.
|
|
// <i> Modify this setting if you need to have ANT events dispatched before or after other stack events, such as BLE or SoC.
|
|
// <i> Zero is the highest priority.
|
|
|
|
#ifndef NRF_SDH_ANT_STACK_OBSERVER_PRIO
|
|
#define NRF_SDH_ANT_STACK_OBSERVER_PRIO 0
|
|
#endif
|
|
|
|
// <o> NRF_SDH_BLE_STACK_OBSERVER_PRIO
|
|
// <i> This setting configures the priority with which BLE events are processed with respect to other events coming from the stack.
|
|
// <i> Modify this setting if you need to have BLE events dispatched before or after other stack events, such as ANT or SoC.
|
|
// <i> Zero is the highest priority.
|
|
|
|
#ifndef NRF_SDH_BLE_STACK_OBSERVER_PRIO
|
|
#define NRF_SDH_BLE_STACK_OBSERVER_PRIO 0
|
|
#endif
|
|
|
|
// <o> NRF_SDH_SOC_STACK_OBSERVER_PRIO
|
|
// <i> This setting configures the priority with which SoC events are processed with respect to other events coming from the stack.
|
|
// <i> Modify this setting if you need to have SoC events dispatched before or after other stack events, such as ANT or BLE.
|
|
// <i> Zero is the highest priority.
|
|
|
|
#ifndef NRF_SDH_SOC_STACK_OBSERVER_PRIO
|
|
#define NRF_SDH_SOC_STACK_OBSERVER_PRIO 0
|
|
#endif
|
|
|
|
// </h>
|
|
//==========================================================
|
|
|
|
// </h>
|
|
//==========================================================
|
|
|
|
// </e>
|
|
|
|
// <e> NRF_SDH_SOC_ENABLED - nrf_sdh_soc - SoftDevice SoC event handler
|
|
//==========================================================
|
|
#ifndef NRF_SDH_SOC_ENABLED
|
|
#define NRF_SDH_SOC_ENABLED 1
|
|
#endif
|
|
// <h> SoC Observers - Observers and priority levels
|
|
|
|
//==========================================================
|
|
// <o> NRF_SDH_SOC_OBSERVER_PRIO_LEVELS - Total number of priority levels for SoC observers.
|
|
// <i> This setting configures the number of priority levels available for the SoC event handlers.
|
|
// <i> The priority level of a handler determines the order in which it receives events, with respect to other handlers.
|
|
|
|
#ifndef NRF_SDH_SOC_OBSERVER_PRIO_LEVELS
|
|
#define NRF_SDH_SOC_OBSERVER_PRIO_LEVELS 2
|
|
#endif
|
|
|
|
// <h> SoC Observers priorities - Individual priorities
|
|
|
|
//==========================================================
|
|
// <o> BLE_ADV_SOC_OBSERVER_PRIO
|
|
// <i> Priority with which SoC events are dispatched to the Advertising module.
|
|
|
|
#ifndef BLE_ADV_SOC_OBSERVER_PRIO
|
|
#define BLE_ADV_SOC_OBSERVER_PRIO 1
|
|
#endif
|
|
|
|
// <o> BLE_DFU_SOC_OBSERVER_PRIO
|
|
// <i> Priority with which BLE events are dispatched to the DFU Service.
|
|
|
|
#ifndef BLE_DFU_SOC_OBSERVER_PRIO
|
|
#define BLE_DFU_SOC_OBSERVER_PRIO 1
|
|
#endif
|
|
|
|
// <o> CLOCK_CONFIG_SOC_OBSERVER_PRIO
|
|
// <i> Priority with which SoC events are dispatched to the Clock driver.
|
|
|
|
#ifndef CLOCK_CONFIG_SOC_OBSERVER_PRIO
|
|
#define CLOCK_CONFIG_SOC_OBSERVER_PRIO 0
|
|
#endif
|
|
|
|
// <o> POWER_CONFIG_SOC_OBSERVER_PRIO
|
|
// <i> Priority with which SoC events are dispatched to the Power driver.
|
|
|
|
#ifndef POWER_CONFIG_SOC_OBSERVER_PRIO
|
|
#define POWER_CONFIG_SOC_OBSERVER_PRIO 0
|
|
#endif
|
|
|
|
// </h>
|
|
//==========================================================
|
|
|
|
// </h>
|
|
//==========================================================
|
|
|
|
// </e>
|
|
|
|
// </h>
|
|
//==========================================================
|
|
|
|
//==========================================================
|
|
|
|
// <h> nRF_Segger_RTT
|
|
|
|
//==========================================================
|
|
// <h> segger_rtt - SEGGER RTT
|
|
|
|
//==========================================================
|
|
// <o> SEGGER_RTT_CONFIG_BUFFER_SIZE_UP - Size of upstream buffer.
|
|
// <i> Note that either @ref NRF_LOG_BACKEND_RTT_OUTPUT_BUFFER_SIZE
|
|
// <i> or this value is actually used. It depends on which one is bigger.
|
|
|
|
#ifndef SEGGER_RTT_CONFIG_BUFFER_SIZE_UP
|
|
#define SEGGER_RTT_CONFIG_BUFFER_SIZE_UP 512
|
|
#endif
|
|
|
|
// <o> SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS - Maximum number of upstream buffers.
|
|
#ifndef SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS
|
|
#define SEGGER_RTT_CONFIG_MAX_NUM_UP_BUFFERS 4
|
|
#endif
|
|
|
|
// <o> SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN - Size of downstream buffer.
|
|
#ifndef SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN
|
|
#define SEGGER_RTT_CONFIG_BUFFER_SIZE_DOWN 16
|
|
#endif
|
|
|
|
// <o> SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS - Maximum number of downstream buffers.
|
|
#ifndef SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS
|
|
#define SEGGER_RTT_CONFIG_MAX_NUM_DOWN_BUFFERS 2
|
|
#endif
|
|
|
|
// <o> SEGGER_RTT_CONFIG_DEFAULT_MODE - RTT behavior if the buffer is full.
|
|
|
|
// <i> The following modes are supported:
|
|
// <i> - SKIP - Do not block, output nothing.
|
|
// <i> - TRIM - Do not block, output as much as fits.
|
|
// <i> - BLOCK - Wait until there is space in the buffer.
|
|
// <0=> SKIP
|
|
// <1=> TRIM
|
|
// <2=> BLOCK_IF_FIFO_FULL
|
|
|
|
#ifndef SEGGER_RTT_CONFIG_DEFAULT_MODE
|
|
#define SEGGER_RTT_CONFIG_DEFAULT_MODE 0
|
|
#endif
|
|
|
|
// </h>
|
|
//==========================================================
|
|
|
|
#ifndef NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE
|
|
#define NRF_LOG_BACKEND_RTT_TEMP_BUFFER_SIZE 512
|
|
#endif
|
|
|
|
#ifndef NRF_LOG_BACKEND_RTT_TX_RETRY_CNT
|
|
#define NRF_LOG_BACKEND_RTT_TX_RETRY_CNT 1
|
|
#endif
|
|
|
|
#ifndef NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS
|
|
#define NRF_LOG_BACKEND_RTT_TX_RETRY_DELAY_MS 10
|
|
#endif
|
|
|
|
// <o> ST7735_SCK_PIN - Pin number <0-47>
|
|
|
|
#ifndef ST7735_SCK_PIN
|
|
#define ST7735_SCK_PIN 2
|
|
#endif
|
|
|
|
// <o> ST7735_MISO_PIN - Pin number <0-47>
|
|
|
|
#ifndef ST7735_MISO_PIN
|
|
#define ST7735_MISO_PIN 4
|
|
#endif
|
|
|
|
// <o> ST7735_MOSI_PIN - Pin number <0-47>
|
|
|
|
#ifndef ST7735_MOSI_PIN
|
|
#define ST7735_MOSI_PIN 3
|
|
#endif
|
|
|
|
// <o> ST7735_SS_PIN - Pin number <0-47>
|
|
|
|
#ifndef ST7735_SS_PIN
|
|
#define ST7735_SS_PIN 25
|
|
#endif
|
|
|
|
#ifndef ST7789_ROW_OFFSET
|
|
#define ST7789_ROW_OFFSET 0
|
|
#endif
|
|
|
|
// <o> ST7735_IRQ_PRIORITY - Interrupt priority
|
|
|
|
// <i> Priorities 0,2 (nRF51) and 0,1,4,5 (nRF52) are reserved for SoftDevice
|
|
// <0=> 0 (highest)
|
|
// <1=> 1
|
|
// <2=> 2
|
|
// <3=> 3
|
|
// <4=> 4
|
|
// <5=> 5
|
|
// <6=> 6
|
|
// <7=> 7
|
|
|
|
#ifndef ST7735_IRQ_PRIORITY
|
|
#define ST7735_IRQ_PRIORITY 3
|
|
#endif
|
|
|
|
// </h>
|
|
//==========================================================
|
|
|
|
// <o> ST7735_SPI_INSTANCE
|
|
|
|
// <0=> 0
|
|
// <1=> 1
|
|
// <2=> 2
|
|
|
|
#ifndef ST7735_SPI_INSTANCE
|
|
#define ST7735_SPI_INSTANCE 0
|
|
#endif
|
|
|
|
#ifndef ST7735_SPI_MODE
|
|
#define ST7735_SPI_MODE 3
|
|
#endif
|
|
|
|
#ifndef ST7735_SPI_FREQUENCY
|
|
#define ST7735_SPI_FREQUENCY 8000000
|
|
#endif
|
|
|
|
// <o> ST7735_TAB_COLOR - Color of the tab attached to the screen.
|
|
|
|
// <0=> INITR_GREENTAB
|
|
// <1=> INITR_REDTAB
|
|
// <2=> INITR_BLACKTAB
|
|
// <3=> INITR_144GREENTAB
|
|
|
|
#ifndef ST7735_TAB_COLOR
|
|
#define ST7735_TAB_COLOR 2
|
|
#endif
|
|
|
|
// <o> ST7735_DC_PIN - Pin number <0-47>
|
|
|
|
#ifndef ST7735_DC_PIN
|
|
#define ST7735_DC_PIN 18
|
|
#endif
|
|
|
|
// <o> ST7735_HEIGHT - ST7735 height <0-162>
|
|
|
|
#ifndef ST7735_HEIGHT
|
|
#define ST7735_HEIGHT 160
|
|
#endif
|
|
|
|
// <o> ST7735_WIDTH - ST7735 width <0-132>
|
|
|
|
#ifndef ST7735_WIDTH
|
|
#define ST7735_WIDTH 128
|
|
#endif
|
|
|
|
// <<< end of configuration section >>>
|
|
#endif // SDK_CONFIG_H
|